On 12/01/2015 08:11 AM, Rajendra Nayak wrote: > Add new dtsi and dts files for the apq8096 dragonboards with just > a serial device used as debug console > > While at it, also rearrange the Makefile so we have one dtb per line > so as to be consistent with whats done on other platforms. > > Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/Makefile | 4 ++- > arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts | 21 ++++++++++++++++ > arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++ > 3 files changed, 54 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts > create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi One problem. The board you have is not called a dragonboard. Let's check with the marketing folks on what they're calling it now. We need to explicitly avoid using dragonboard here as that name applies to a different class of products. Thanks. - Bryan -- Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html