On Fri, 27 Nov 2015 16:39:37 +0800 Jisheng Zhang wrote: > On Fri, 27 Nov 2015 08:51:27 +0100 > Sebastian Hesselbarth wrote: > > > On 24.11.2015 03:35, Jisheng Zhang wrote: > > > On Mon, 23 Nov 2015 16:54:44 +0800 > > > Jisheng Zhang wrote: > > >> On Mon, 23 Nov 2015 09:30:42 +0100 > > >> Sebastian Hesselbarth wrote: > > >>> On 23.11.2015 08:21, Jisheng Zhang wrote: > > >>>> On Fri, 20 Nov 2015 22:06:59 +0100 > > >>>> Sebastian Hesselbarth wrote: > > >>>>> On 20.11.2015 09:42, Jisheng Zhang wrote: > > >>>>>> Add syspll, mempll, cpupll, gateclk and berlin-clk nodes. > > >>>>>> > > >>>>>> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx> > > >>>>>> --- > > >>> [...] > > >>>>>> + syspll: syspll { > > >>>>>> + compatible = "marvell,berlin-pll"; > > >>>>>> + reg = <0xea0200 0x14>, <0xea0710 4>; > > >>>>>> + #clock-cells = <0>; > > >>>>>> + clocks = <&osc>; > > >>>>>> + bypass-shift = /bits/ 8 <0>; > > >>>>>> + }; > > >>>>>> + > > >>>>>> + gateclk: gateclk { > > >>>>>> + compatible = "marvell,berlin4ct-gateclk"; > > >>>>>> + reg = <0xea0700 4>; > > >>>>>> + #clock-cells = <1>; > > >>>>>> + }; > > >>>>>> + > > >>>>>> + clk: clk { > > >>>>>> + compatible = "marvell,berlin4ct-clk"; > > >>>>>> + reg = <0xea0720 0x144>; > > >>>>> > > >>>>> Looking at the reg ranges, I'd say that they are all clock related > > >>>>> and pretty close to each other: > > >>>>> > > >>>>> gateclk: reg = <0xea0700 4>; > > >>>>> bypass: reg = <0xea0710 4>; > > >>>>> clk: reg = <0xea0720 0x144>; > > >>>> > > >>>> Although these ranges sit close, but we should represent HW structure as you > > >>>> said. > > >>> > > >>> Then how do you argue that you have to share the gate clock register > > >>> with every PLL? The answer is quite simple: You are not separating by > > >>> HW either but existing SW API. > > >> > > >> No, PLLs don't share register any more. You can find what all clock nodes will > > >> look like in: > > > > Jisheng, > > > > referring to the sunxi clock related thread, I am glad you finally > > picked up the idea of merging clock nodes. Before you start reworking > > bg4 clocks, I think I should be a little bit more clear about what I > > expect to be the outcome. > > > > When I said "one single clock complex node", I was referring to the > > clocks located within the system-controller reg region, i.e. those at > > 0xea0000. With bg2x we came to the conclusion that those registers > > cannot be not cleanly separated by functions, so we decided to have > > a single system-controller simple-mfd node with sub-nodes for > > pinctrl, clock, reset, and whatever we will find there in the future. > > > > Please also follow this scheme for bg4 because when you start looking > > at reset, you'll likely see the same issues we were facing: Either you > > have a reset controller node with a plethora of reg property entries > > or you constantly undermine the concept of requested resources by using > > of_iomap(). > > > > Using simple-mfd is a compromise between detailed HW description and > > usability. It will also automatically deal with concurrent accesses to > > the same register for e.g. clock and reset because simple-mfd and syscon > > install an access lock for the reg region. Even though there may be no > > real concurrent accesses to the same register, it does no real harm > > because we are locking resisters that aren't supposed to be used in > > high-speed applications. Some of them are touched once at boot, most > > of them are never touched by Linux at all. > > Thank you so much for the detailed information. It do help me to have > a better understanding why. > > > > > For the other PLLs at <0x922000 0x14> and <0x940034 0x14>, I do accept > > that they are not part of the system-controller sub-node. For the short > > run, I would accept separate nodes for the PLLs alone, but on the long > > run they should be hidden within the functional node they belong to, > > i.e. mempll should be a clock provided by some memory-controller node. > > As soon as you look at power saving modes for the memory-controller, > > you would need access to memory-controller register _and_ mempll anyway. > > > > We do have our DT tagged unstable, so we still can easily revert our > > limited view of some nodes later. > > > > BTW, if the clock provided by mempll is used to generate peripheral > > clocks that are dealt with in the sysctrl clock complex, you should, > > mempll is only for ddrphy clk. So we are lucky ;) oops, no, we are not lucky. mempll and memfastrefclk are clk-muxed to ddrphy clk which is dealt within the complex big clock block. So is for cpupll, cpufastrefclk But it's not that hard to add this support in the code. Thanks for the example, I do need that.... > > Thanks, > Jisheng > > > of course, expose that relation in DT, e.g.: > > > > sysctrl: system-controller { > > reg = <0xea0700 0xfoo>; > > > > sysclk: clock { > > #clock-cells = <1>; > > clocks = <&osc>, <&memctrl 0>; > > clock-names = "osc", "mempll"; > > }; > > }; > > > > memctrl: memory-controller { > > reg = <0x920000 0xbar>; > > /* > > * clock-cells can also be 0 > > * if there is no other clock provided > > */ > > #clock-cells = <1>; > > > > clocks = <&osc>; > > clock-names = "osc"; > > }; > > > > some-peripheral: bla { > > clocks = <&sysclk SOME_PERIPHERAL_CLOCK_ID>; > > }; > > > > Sebastian > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html