Add berlin4ct clk driver. The berlin4ct SoC contains: two kinds of PLL: normal PLL and AVPLL. The normal PLL support is done. The AVPLL support is in TODO list. two kinds of clk: normal clk and gate clk. The normal clk supports changing divider, selecting clock source, disabling/enabling etc. The gate clk only supports disabling/enabling. Both are supported in this series. Since v1: - rebased on v4.4-rc1 - refactor out common code from clk-berlin4ct.c - s/lock/berlin4ct_gateclk_lock - drop WARN_ON for an allocation failure - s/kzalloc/kcalloc - add necessary handling in error code path, such as free memory, iounmap etc. - initialize init.flags - drop vcodiv_berlin[] array Jisheng Zhang (6): clk: berlin: add common pll driver clk: berlin: add common clk driver for newer SoCs clk: berlin: add common gateclk driver for newer SoCs clk: berlin: add clk support for berlin4ct dt-bindings: add binding for marvell berlin4ct SoC arm64: dts: berlin4ct: add pll and clock nodes .../bindings/clock/marvell,berlin4ct.txt | 38 ++++ arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 38 ++++ drivers/clk/berlin/Makefile | 1 + drivers/clk/berlin/clk-berlin4ct.c | 97 ++++++++++ drivers/clk/berlin/clk.c | 203 +++++++++++++++++++++ drivers/clk/berlin/clk.h | 45 +++++ drivers/clk/berlin/gate.c | 73 ++++++++ drivers/clk/berlin/pll.c | 133 ++++++++++++++ include/dt-bindings/clock/berlin4ct.h | 56 ++++++ 9 files changed, 684 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/marvell,berlin4ct.txt create mode 100644 drivers/clk/berlin/clk-berlin4ct.c create mode 100644 drivers/clk/berlin/clk.c create mode 100644 drivers/clk/berlin/clk.h create mode 100644 drivers/clk/berlin/gate.c create mode 100644 drivers/clk/berlin/pll.c create mode 100644 include/dt-bindings/clock/berlin4ct.h -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
