Update the name for the second jack detection pin binding to be a little
less confusing.
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/extcon/extcon-arizona.txt | 4 ++--
drivers/extcon/extcon-arizona.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
index 03fa7b7..da9813b 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
@@ -14,9 +14,9 @@ Optional properties:
If this node is not mentioned or if the value is unknown, then
headphone detection mode is set to HPDETL.
- - wlf,use-jd-gpio : Use GPIO input along with JD1 for dual pin jack
+ - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack
detection.
- - wlf,use-jd-gpio-nopull : Internal pull on GPIO is disabled when used for
+ - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for
jack detection.
- wlf,jd-invert : Invert the polarity of the jack detection switch
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 7c9598d..c377030 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1245,9 +1245,9 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona)
device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw);
pdata->jd_gpio5 = device_property_read_bool(arizona->dev,
- "wlf,use-jd-gpio");
+ "wlf,use-jd2");
pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev,
- "wlf,use-jd-gpio-nopull");
+ "wlf,use-jd2-nopull");
return 0;
}
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
