[...] > diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig > index 8c53c55..20479d7 100644 > --- a/arch/arm/mach-bcm/Kconfig > +++ b/arch/arm/mach-bcm/Kconfig > @@ -134,6 +134,16 @@ config ARCH_BCM2835 > This enables support for the Broadcom BCM2835 SoC. This SoC is > used in the Raspberry Pi and Roku 2 devices. > > +config RASPBERRYPI_POWER You don't need a new Kconfig option I think. If you fold in the below "select" under ARCH_BCM2835, that should work as well, right? select PM_GENERIC_DOMAINS if (RASPBERRYPI_FIRMWARE && PM && OF) > + bool "Raspberry Pi power domain driver" > + depends on ARCH_BCM2835 > + depends on RASPBERRYPI_FIRMWARE > + select PM_GENERIC_DOMAINS if PM > + select PM_GENERIC_DOMAINS_OF if PM > + help > + This enables support for the RPi power domains which can be enabled > + or disabled via the RPi firmware. > + > config ARCH_BCM_63XX > bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7 > depends on MMU > diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile > index 892261f..fec2d6b 100644 > --- a/arch/arm/mach-bcm/Makefile > +++ b/arch/arm/mach-bcm/Makefile > @@ -36,6 +36,7 @@ endif > > # BCM2835 > obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o > +obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o According to above, then this should become: obj-$(CONFIG_PM_GENERIC_DOMAINS) += raspberrypi-power.o [...] Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
