Am Dienstag, den 24.11.2015, 17:19 +0800 schrieb Shawn Guo:
> On Mon, Nov 16, 2015 at 12:38:15PM +0100, Lucas Stach wrote:
> <snip>
> > > > > + reg_sd3_vmmc: sd3_vmmc {
> > > > > + compatible = "regulator-fixed";
> > > > > + regulator-name = "P3V3_SD3_SWITCHED";
> > > > > + regulator-min-microvolt = <3300000>;
> > > > > + regulator-max-microvolt = <3300000>;
> > > > > + gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
> > > > > + regulator-boot-on;
> > > > > + regulator-always-on;
> > > > > + };
> > > >
> > > > A lot of those regulators look like they don't need to be always-on.
> > > >
> > > > Also the use of a simple-bus, while giving some structure to the DT is
> > > > considered bad style as it doesn't reflect any real hardware.
> > > >
> > >
> > > I will check how other boards do it
> > >
> > Note that there are a lot of bad examples still around. What you need to
> > do is essentially just remove the additional DT level of the regulator
> > bus. The regulators are board components that belong to the same level
> > as the usb hub below, or the memory node above.
>
> Will kernel populate platform_device for these fixed regulators if they
> are being put directly under root node? Kernel used to only do that for
> devices under simple-bus.
>
It does, as other behavior would clearly be a bug that should not be
worked around in the DT itself.
We are using of_platform_populate() to populate the root bus. From the
comment above this function:
"It differs in that it follows the modern convention of requiring all
device nodes to have a 'compatible' property, and it is suitable for
creating devices which are children of the root node
(of_platform_bus_probe will only create children of the root which are
selected by the @matches argument)."
Regards,
Lucas
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
