OK, Thanks Heiko. :-)
On 2015年11月24日 08:03, Heiko Stübner wrote:
Hi Xing Zheng,
Am Donnerstag, 5. November 2015, 15:33:54 schrieb Xing Zheng:
Hi,
We need to support rk3036 soc platform via upstream, there are
some primary parts for the initial release of minimum system: dts,
clk-pll, smp, and clock tree for rk3036, and additional, we can use
these startup and run to init processs.
[...]
after talking with Mike and agreeing that I'm again taking the regular
clock patches to them, I've applied all of this to appropriate branches.
I did some cosmetics, as explained below.
Xing Zheng (6):
dt-bindings: add documentation of rk3036 clock controller
clk: rockchip: add dt-binding header for rk3036
clk: rockchip: add new pll-type for rk3036 and similar socs
- wrapped some overly long lines, otherwise this is similar to what
Stephen already took for the rk3066-pll-type.
clk: rockchip: add clock controller for rk3036
ARM: dts: rockchip: add core rk3036 dts
- split off the evb into a separate patch
- reordered some nodes (please order by the address (the @xxxxxxxx)
- reordered some properties
- fixed the gic cpu masks
ARM: dts: enable smp for rk3036
folded into the core dtsi addition
Please take a final look at [0] to make sure I didn't mess up anything.
Thanks
Heiko
[0]
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/next
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-armsoc/dts32
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html