Hi Xing Zheng, Am Donnerstag, 5. November 2015, 15:33:54 schrieb Xing Zheng: > Hi, > We need to support rk3036 soc platform via upstream, there are > some primary parts for the initial release of minimum system: dts, > clk-pll, smp, and clock tree for rk3036, and additional, we can use > these startup and run to init processs. [...] after talking with Mike and agreeing that I'm again taking the regular clock patches to them, I've applied all of this to appropriate branches. I did some cosmetics, as explained below. > Xing Zheng (6): > dt-bindings: add documentation of rk3036 clock controller > clk: rockchip: add dt-binding header for rk3036 > clk: rockchip: add new pll-type for rk3036 and similar socs - wrapped some overly long lines, otherwise this is similar to what Stephen already took for the rk3066-pll-type. > clk: rockchip: add clock controller for rk3036 > ARM: dts: rockchip: add core rk3036 dts - split off the evb into a separate patch - reordered some nodes (please order by the address (the @xxxxxxxx) - reordered some properties - fixed the gic cpu masks > ARM: dts: enable smp for rk3036 folded into the core dtsi addition Please take a final look at [0] to make sure I didn't mess up anything. Thanks Heiko [0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/next https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-armsoc/dts32 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
