Re: [PATCH v2 4/5] dt-bindings: document sun8i_ths

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Nov 23, 2015 at 4:02 PM, Josef Gajdusek <atx@xxxxxxxx> wrote:
> This patch adds the binding documentation for the sun8i_ths driver
>
> Signed-off-by: Josef Gajdusek <atx@xxxxxxxx>
> ---
>  .../devicetree/bindings/thermal/sun8i-ths.txt      | 31 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt
>
> diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
> new file mode 100644
> index 0000000..67056bf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
> @@ -0,0 +1,31 @@
> +* sun8i THS
> +
> +Required properties:
> +- compatible : "allwinner,sun8i-h3-ths"
> +- reg : Address range of the thermal registers and location of the calibration
> +        value

You are now using nvmem for the calibration data. You don't need the second
entry.

> +- resets : Must contain an entry for each entry in reset-names.
> +           see ../reset/reset.txt for details
> +- reset-names : Must include the name "ahb"
> +- clocks : Must contain an entry for each entry in clock-names.
> +- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS
> +  clock
> +
> +Optional properties:
> +- nvmem-cells : Must contain an entry for each entry in nvmem-cell-names
> +- nvmem-cell-names : Must contain "calibration" for the cell containing the
> +  temperature calibration cell, if available
> +
> +Example:
> +ths: ths@01c25000 {
> +       #thermal-sensor-cells = <0>;
> +       compatible = "allwinner,sun8i-h3-ths";
> +       reg = <0x01c25000 0x88>, <0x01c14234 0x4>;

Same here.

ChenYu

> +       interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> +       resets = <&bus_rst 136>;
> +       reset-names = "ahb";
> +       clocks = <&bus_gates 72>, <&ths_clk>;
> +       clock-names = "ahb", "ths";
> +       nvmem-cells = <&ths_calibration>;
> +       nvmem-cell-names = "calibration";
> +};
> --
> 2.4.10
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux