Hello everyone, this is v2 of my THS patchset Changelog: * Some stylistic changes * devm_reset_control_get_optional -> devm_reset_control_get * Added the clk-h3-ths clock driver - Note: A23/A33/A83T do not have a separate clock, H3 seems to be the first (and only?) SoC with it - Because of this, I moved the clock init code to the H3-specific init function. * Use the nvmem cell abstraction instead of accessing the configuration memory directly * Use the IRQ line (and fixed incorrect interrupt number in the DTS) * Renamed to sun8i_ths Ad the "magical constants": what I meant is that altough the datasheet explains what they are, it does not explain how to pick their values. "ADC" and "Sensor" "acquire time" are also not exactly the most helpful descriptions. Anyway, I changed the values such as the final sampling rate is about 1Hz. Josef Gajdusek (5): ARM: dts: sun8i: Add SID node clk: sunxi: Add driver for the H3 THS clock thermal: Add a driver for the Allwinner THS sensor dt-bindings: document sun8i_ths ARM: dts: sun8i: Add THS node to the H3 .dtsi Documentation/devicetree/bindings/clock/sunxi.txt | 1 + .../devicetree/bindings/thermal/sun8i-ths.txt | 31 ++ arch/arm/boot/dts/sun8i-h3.dtsi | 40 +++ drivers/clk/sunxi/Makefile | 1 + drivers/clk/sunxi/clk-h3-ths.c | 98 ++++++ drivers/thermal/Kconfig | 7 + drivers/thermal/Makefile | 1 + drivers/thermal/sun8i_ths.c | 365 +++++++++++++++++++++ 8 files changed, 544 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt create mode 100644 drivers/clk/sunxi/clk-h3-ths.c create mode 100644 drivers/thermal/sun8i_ths.c -- 2.4.10 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html