On 11/20/2015 03:20 PM, Tim Bird wrote:
> Add optional async_irq to msm_hsusb binding doc.
>
> Signed-off-by: Tim Bird <tim.bird@xxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
I probably should have taken this Acked-by by Rob off. Sorry about that.
-- Tim
> ---
> Documentation/devicetree/bindings/usb/msm-hsusb.txt | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> index 8654a3e..bb2b304 100644
> --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> @@ -23,7 +23,12 @@ Required properties:
> "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY
>
> - regs: Offset and length of the register set in the memory map
> -- interrupts: interrupt-specifier for the OTG interrupt.
> +- interrupts: interrupt-specifier for the OTG interrupts
> +
> +- interrupt-names: Should contain the following:
> + "core" USB core interrupt
> + "async" Asynchronous interrupt to wake up from low power mode
> + (optional)
>
> - clocks: A list of phandle + clock-specifier pairs for the
> clocks listed in clock-names
> @@ -89,7 +94,8 @@ Example HSUSB OTG controller device node:
> usb@f9a55000 {
> compatible = "qcom,usb-otg-snps";
> reg = <0xf9a55000 0x400>;
> - interrupts = <0 134 0>;
> + interrupts = <0 134 0>, <0 140 0>;
> + interrupt-names = "core_irq", "async_irq";
> dr_mode = "peripheral";
>
> clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
