Add optional async_irq to msm_hsusb binding doc. Signed-off-by: Tim Bird <tim.bird@xxxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Documentation/devicetree/bindings/usb/msm-hsusb.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 8654a3e..bb2b304 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -23,7 +23,12 @@ Required properties: "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY - regs: Offset and length of the register set in the memory map -- interrupts: interrupt-specifier for the OTG interrupt. +- interrupts: interrupt-specifier for the OTG interrupts + +- interrupt-names: Should contain the following: + "core" USB core interrupt + "async" Asynchronous interrupt to wake up from low power mode + (optional) - clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names @@ -89,7 +94,8 @@ Example HSUSB OTG controller device node: usb@f9a55000 { compatible = "qcom,usb-otg-snps"; reg = <0xf9a55000 0x400>; - interrupts = <0 134 0>; + interrupts = <0 134 0>, <0 140 0>; + interrupt-names = "core_irq", "async_irq"; dr_mode = "peripheral"; clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html