On Mon, Nov 16, 2015 at 01:19:55PM -0300, Ariel D'Alessandro wrote: > Add the devicetree binding document for NXP LPC18xx EEPROM memory. > > Signed-off-by: Ariel D'Alessandro <ariel@xxxxxxxxxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> > --- > .../devicetree/bindings/nvmem/lpc1857-eeprom.txt | 28 ++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt > > diff --git a/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt b/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt > new file mode 100644 > index 0000000..809df68 > --- /dev/null > +++ b/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt > @@ -0,0 +1,28 @@ > +* NXP LPC18xx EEPROM memory NVMEM driver > + > +Required properties: > + - compatible: Should be "nxp,lpc1857-eeprom" > + - reg: Must contain an entry with the physical base address and length > + for each entry in reg-names. > + - reg-names: Must include the following entries. > + - reg: EEPROM registers. > + - mem: EEPROM address space. > + - clocks: Must contain an entry for each entry in clock-names. > + - clock-names: Must include the following entries. > + - eeprom: EEPROM operating clock. > + - resets: Should contain a reference to the reset controller asserting > + the EEPROM in reset. > + - interrupts: Should contain EEPROM interrupt. > + > +Example: > + > + eeprom: eeprom@4000e000 { > + compatible = "nxp,lpc1857-eeprom"; > + reg = <0x4000e000 0x1000>, > + <0x20040000 0x4000>; > + reg-names = "reg", "mem"; > + clocks = <&ccu1 CLK_CPU_EEPROM>; > + clock-names = "eeprom"; > + resets = <&rgu 27>; > + interrupts = <4>; > + }; > -- > 2.6.2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html