Re: [PATCH v7 00/50] powerpc/powernv: PCI hotplug support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, 2015-11-09 at 15:29 +1100, Gavin Shan wrote:
> 
> Yeah, I dropped that before it's populated completely as I was told
> it's disallowed
> by my employer. I have to push it into IBM internal git server and
> it's only visible
> to IBM. Sorry for the inconvienence...

I think that's a misinterpretation of the rule, I'll sort that out
tomorrow, there should be no problem publishing that tree on github as
long as you take a couple of precautions.

Cheers,
Ben.

> > > 
> > > > The series of patches intend to support PCI slot for PowerPC
> > > > PowerNV platform,
> > > > which is running on top of skiboot firmware. The patchset
> > > > requires corresponding
> > > > changes from skiboot firmware, which is sent to skiboot@lists.o
> > > > zlabs.org
> > > > for review. The PCI slots are exposed by skiboot with device
> > > > node properties,
> > > > and kernel utilizes those properties to populated PCI slots
> > > > accordingly.
> > > > 
> > > > The original PCI infrastructure on PowerNV platform can't
> > > > support hotplug
> > > > because the PE is assigned during PHB fixup time, which is
> > > > called for once
> > > > during system boot time. For this, the PCI infrastructure on
> > > > PowerNV platform
> > > > has been reworked for a lot. After that, the PE and its
> > > > corresponding resources
> > > > (IODT, M32DT, M64 segments, DMA32 and bypass window) are
> > > > assigned upon updating
> > > > PCI bridge's resources, which might decide PE# assigned to the
> > > > PE (e.g. M64
> > > > resources, on P8 strictly speaking). Each PE will maintain a
> > > > reference count,
> > > > which is (number of child PCI devices + 1). That indicates when
> > > > last child PCI
> > > > device leaves the PE, the PE and its included resources will be
> > > > relased and put
> > > > back into free pool again. With this design, the PE will be
> > > > released when EEH PE
> > > > is released. PATCH[1 - 27] are related to this part.
> > > > 
> > > > > From skiboot perspective, PCI slot is providing
> > > > > (hot/fundamental/complete)
> > > > resets to EEH. The kernel gets to know if skiboot supports
> > > > various reset on one
> > > > particular PCI slot through device-tree node. If it does, EEH
> > > > will utilize the
> > > > functionality provided by skiboot. Besides, the device-tree
> > > > nodes have to change
> > > > in order to support PCI hotplug. For example, when one PCI
> > > > adapter inserted to
> > > > one slot, its device-tree node should be added to the system
> > > > dynamically. Conversely,
> > > > the device-tree node should be removed from the system when the
> > > > PCI adapter is going
> > > > to be offline. Since pci_dn and eeh_dev have same life cyle as
> > > > PCI device nodes,
> > > > they should be added/removed accordingly during PCI hotplug.
> > > > PATCH[28 - 43] are
> > > > doing the related work.
> > > > 
> > > > The OF driver is changed to support unflattening FDT blob for
> > > > sub-stree, which
> > > > is covered by PATCH[44 - 49].
> > > > 
> > > > The last one, PATCH[50], is the standalone PCI hotplug driver
> > > > for PowerPC PowerNV
> > > > platform. 
> > > > 
> > > > Changelog
> > > > =========
> > > > v7:
> > > >  * Reworked revision to some extent.
> > > >  * Rebased to powerpc/next repository.
> > > >  * Reorder/split/merge/drop according - Alexey.
> > > >  * Defined macros and use array to track IO/M32/M64/DMA32
> > > > segments - Alexey.
> > > >  * Merged 3 files to one for the hotplug driver - Alexey.
> > > >  * As part of OPAL API, defined macros for PCI slot power
> > > > state, hotplug
> > > >    message type. Defined macros for PCI slot power confirmed
> > > > state in
> > > >    hotplug driver.
> > > >  * Misc comments from Alexey.
> > > >  * Reworked unflatten_dt_node() to avoid recursive function
> > > > calls.
> > > >  * Use EXPORT_SYMBOL_GPL() and document function's input/output
> > > > - Rob/Frank.
> > > > v6:
> > > >  * Patch reorder, split, squash - Alexey.
> > > >  * Minor coding style - Alexey.
> > > >  * Better function names for pcibios_{add,remove}_pci_devices -
> > > > Bjorn
> > > >  * Replace pr_warn() with dev_warn() in PowerNV hotplug driver
> > > > - Bjorn
> > > >  * Concurrent depth as parameter passed to
> > > > __unflatten_dt_node() - Grant / Alexey
> > > >  * Replace overlay with of_changeset - Grant
> > > > v5:
> > > >  * Rebased to 4.1.rc6 and some unmerged patches as below:
> > > >    Alexey's DDW patchset (v11);
> > > >    Gavin's EEH error injection support (in mpe's next branch);
> > > >    Richard's EEH cleanup patches (in mpe's next branch);
> > > >    Richard's EEH support for VF (v7);
> > > >    Gavin's misc EEH fixes for 4.2;
> > > >  * The revision bases on skiboot corresponding patches (v7):
> > > >    https://patchwork.ozlabs.org/patch/480437/
> > > >  * Utilize OF overlay to update device-tree with help of newly
> > > > introduced
> > > >    OPAL API opal_get_overlay_dt().
> > > >  * Split patches for easy review according to aik's comments.
> > > >  * Fix coding style from checkpatchc.pl as pointed by aik.
> > > >  * Code cleanup and misc fixup according to aik's input.
> > > > v4:
> > > >  * Rebased to 4.1.RC1
> > > >  * Added API to unflatten FDT blob to device node sub-tree,
> > > > which is attached
> > > >    the indicated parent device node. The original mechanism
> > > > based on formatted
> > > >    string stream has been dropped.
> > > >  * The PATCH[v3 09/21] ("powerpc/eeh: Delay probing EEH device
> > > > during hotplug")
> > > >    was picked up sent to linux-ppc@ separately for review as
> > > > Richard's "VF EEH
> > > >    Support" depends on that.
> > > > v3:
> > > >  * Rebased to 4.1.RC0
> > > >  * PowerNV PCI infrasturcture is total refactored in order to
> > > > support PCI
> > > >    hotplug. The PowerNV hotplug driver is also reworked a lot
> > > > because of
> > > >    the changes in skiboot in order to support PCI hotplug.
> > > > 
> > > > Gavin Shan (50):
> > > > PCI: Add pcibios_setup_bridge()
> > > > powerpc/pci: Override pcibios_setup_bridge()
> > > > powerpc/pci: Cleanup on struct pci_controller_ops
> > > > powerpc/powernv: Cleanup on pnv_pci_ioda_controller_ops
> > > > powerpc/powernv: Drop pnv_ioda_setup_dev_PE()
> > > > powerpc/powernv: Drop phb->bdfn_to_pe()
> > > > powerpc/powernv: Reorder fields in struct pnv_phb
> > > > powerpc/powernv: Rename PE# fields in struct pnv_phb
> > > > powerpc/powernv: Fix initial IO and M32 segmap
> > > > powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()
> > > > powerpc/powernv: IO and M32 mapping based on PCI device
> > > > resources
> > > > powerpc/powernv: Track M64 segment consumption
> > > > powerpc/powernv: Rename M64 related functions
> > > > powerpc/powernv: M64 support on P7IOC
> > > > powerpc/powernv: Rename pnv_pci_ioda_setup_dma_pe()
> > > > powerpc/powernv: Define PNV_IODA1_DMA32_SEGSIZE
> > > > powerpc/powernv: Avoid calculating DMA32 segments on PHB3
> > > > powerpc/powernv: Remove DMA32 PE list
> > > > powerpc/powernv: Track DMA32 segment consumption
> > > > powerpc/powernv: Improve DMA32 segment calculation
> > > > powerpc/powernv: Increase PE# capacity
> > > > powerpc/powernv: Introduce pnv_ioda_init_pe()
> > > > powerpc/powernv: Use PE instead of number during setup and
> > > > release
> > > > powerpc/powernv: Allocate PE# in reverse order
> > > > powerpc/powernv: Reserve PE for root bus
> > > > powerpc/powernv: Create PEs at PCI hot plugging time
> > > > powerpc/powernv: Dynamically release PEs
> > > > powerpc/pci: Rename pcibios_{add,remove}_pci_devices()
> > > > powerpc/pci: Rename pcibios_find_pci_bus()
> > > > powerpc/pci: Move pci_find_bus_by_node() around
> > > > powerpc/pci: Export pci_add_device_node_info()
> > > > powerpc/pci: Introduce pci_remove_device_node_info()
> > > > powerpc/pci: Export pci_traverse_device_nodes()
> > > > powerpc/pci: Delay populating pdn
> > > > powerpc/pci: Don't scan empty slot
> > > > powerpc/pci: Update bridge windows on PCI plug
> > > > powerpc/powernv: Simplify pnv_eeh_reset()
> > > > powerpc/powernv: Exclude root bus in
> > > > pnv_pci_reset_secondary_bus()
> > > > powerpc/powernv: Fundamental reset in
> > > > pnv_pci_reset_secondary_bus()
> > > > powerpc/powernv: Support PCI slot ID
> > > > powerpc/powernv: Use firmware PCI slot reset infrastructure
> > > > powerpc/powernv: Functions to get/set PCI slot status
> > > > powerpc/powernv: Select OF_DYNAMIC
> > > > drivers/of: Split unflatten_dt_node()
> > > > drivers/of: Avoid recursively calling unflatten_dt_node()
> > > > drivers/of: Rename unflatten_dt_node()
> > > > drivers/of: Specify parent node in of_fdt_unflatten_tree()
> > > > drivers/of: Return allocated memory from
> > > > of_fdt_unflatten_tree()
> > > > drivers/of: Export OF changeset functions
> > > > PCI/hotplug: PowerPC PowerNV PCI hotplug driver
> > > > 
> > > > MAINTAINERS                                    |    6 +
> > > > arch/powerpc/include/asm/eeh.h                 |    2 +-
> > > > arch/powerpc/include/asm/opal-api.h            |   17 +-
> > > > arch/powerpc/include/asm/opal.h                |    8 +-
> > > > arch/powerpc/include/asm/pci-bridge.h          |   25 +-
> > > > arch/powerpc/include/asm/pnv-pci.h             |    7 +
> > > > arch/powerpc/include/asm/ppc-pci.h             |    8 +-
> > > > arch/powerpc/kernel/eeh_dev.c                  |   19 +-
> > > > arch/powerpc/kernel/eeh_driver.c               |   12 +-
> > > > arch/powerpc/kernel/pci-common.c               |   16 +-
> > > > arch/powerpc/kernel/pci-hotplug.c              |   47 +-
> > > > arch/powerpc/kernel/pci_dn.c                   |   85 +-
> > > > arch/powerpc/platforms/maple/pci.c             |   34 +-
> > > > arch/powerpc/platforms/pasemi/pci.c            |    3 -
> > > > arch/powerpc/platforms/powermac/pci.c          |   38 +-
> > > > arch/powerpc/platforms/powernv/Kconfig         |    1 +
> > > > arch/powerpc/platforms/powernv/eeh-powernv.c   |  173 ++--
> > > > arch/powerpc/platforms/powernv/opal-wrappers.S |    4 +
> > > > arch/powerpc/platforms/powernv/pci-ioda.c      | 1251
> > > > +++++++++++++++---------
> > > > arch/powerpc/platforms/powernv/pci.c           |   92 +-
> > > > arch/powerpc/platforms/powernv/pci.h           |   62 +-
> > > > arch/powerpc/platforms/pseries/msi.c           |    4 +-
> > > > arch/powerpc/platforms/pseries/pci_dlpar.c     |   32 -
> > > > arch/powerpc/platforms/pseries/setup.c         |    8 +-
> > > > drivers/of/dynamic.c                           |   65 +-
> > > > drivers/of/fdt.c                               |  378 ++++---
> > > > drivers/of/of_private.h                        |    2 +
> > > > drivers/of/overlay.c                           |    8 +-
> > > > drivers/of/unittest.c                          |    6 +-
> > > > drivers/pci/hotplug/Kconfig                    |   12 +
> > > > drivers/pci/hotplug/Makefile                   |    3 +
> > > > drivers/pci/hotplug/pnv_php.c                  |  866
> > > > ++++++++++++++++
> > > > drivers/pci/hotplug/rpadlpar_core.c            |    8 +-
> > > > drivers/pci/hotplug/rpaphp_core.c              |    4 +-
> > > > drivers/pci/hotplug/rpaphp_pci.c               |    4 +-
> > > > drivers/pci/setup-bus.c                        |    5 +
> > > > include/linux/of_fdt.h                         |    5 +-
> > > > include/linux/pci.h                            |    1 +
> > > > 38 files changed, 2389 insertions(+), 932 deletions(-)
> > > > create mode 100644 drivers/pci/hotplug/pnv_php.c
> > > > 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux