Re: [PATCH v7 00/50] powerpc/powernv: PCI hotplug support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Sun, Nov 08, 2015 at 08:24:37PM -0800, Pramod Sudheendra wrote:
>> On Nov 8, 2015, at 7:09 PM, Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx> wrote:
>> On Thu, Nov 05, 2015 at 12:12:00AM +1100, Gavin Shan wrote:
>>> This series of patches rebases on powerpc/next branch, plus below additional
>>> patches:
>>> 
>>>  https://patchwork.ozlabs.org/patch/534804/   (PATCH[1/1] Andrew's EEH fix)
>>>  https://patchwork.ozlabs.org/patch/534154/   (PATCH[7/7] Richard's SRIOV Rework)
>>>  commit 3b0e21e Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next
>>> 
>> 
>> As asked by Alexey, here is the repo on github:
>> 
>> https://github.com/gwshan/pnv-pci-hotplug.git
>Don’t see that link working. 

Yeah, I dropped that before it's populated completely as I was told it's disallowed
by my employer. I have to push it into IBM internal git server and it's only visible
to IBM. Sorry for the inconvienence...

>> 
>>> The series of patches intend to support PCI slot for PowerPC PowerNV platform,
>>> which is running on top of skiboot firmware. The patchset requires corresponding
>>> changes from skiboot firmware, which is sent to skiboot@xxxxxxxxxxxxxxxx
>>> for review. The PCI slots are exposed by skiboot with device node properties,
>>> and kernel utilizes those properties to populated PCI slots accordingly.
>>> 
>>> The original PCI infrastructure on PowerNV platform can't support hotplug
>>> because the PE is assigned during PHB fixup time, which is called for once
>>> during system boot time. For this, the PCI infrastructure on PowerNV platform
>>> has been reworked for a lot. After that, the PE and its corresponding resources
>>> (IODT, M32DT, M64 segments, DMA32 and bypass window) are assigned upon updating
>>> PCI bridge's resources, which might decide PE# assigned to the PE (e.g. M64
>>> resources, on P8 strictly speaking). Each PE will maintain a reference count,
>>> which is (number of child PCI devices + 1). That indicates when last child PCI
>>> device leaves the PE, the PE and its included resources will be relased and put
>>> back into free pool again. With this design, the PE will be released when EEH PE
>>> is released. PATCH[1 - 27] are related to this part.
>>> 
>>>> From skiboot perspective, PCI slot is providing (hot/fundamental/complete)
>>> resets to EEH. The kernel gets to know if skiboot supports various reset on one
>>> particular PCI slot through device-tree node. If it does, EEH will utilize the
>>> functionality provided by skiboot. Besides, the device-tree nodes have to change
>>> in order to support PCI hotplug. For example, when one PCI adapter inserted to
>>> one slot, its device-tree node should be added to the system dynamically. Conversely,
>>> the device-tree node should be removed from the system when the PCI adapter is going
>>> to be offline. Since pci_dn and eeh_dev have same life cyle as PCI device nodes,
>>> they should be added/removed accordingly during PCI hotplug. PATCH[28 - 43] are
>>> doing the related work.
>>> 
>>> The OF driver is changed to support unflattening FDT blob for sub-stree, which
>>> is covered by PATCH[44 - 49].
>>> 
>>> The last one, PATCH[50], is the standalone PCI hotplug driver for PowerPC PowerNV
>>> platform. 
>>> 
>>> Changelog
>>> =========
>>> v7:
>>>  * Reworked revision to some extent.
>>>  * Rebased to powerpc/next repository.
>>>  * Reorder/split/merge/drop according - Alexey.
>>>  * Defined macros and use array to track IO/M32/M64/DMA32 segments - Alexey.
>>>  * Merged 3 files to one for the hotplug driver - Alexey.
>>>  * As part of OPAL API, defined macros for PCI slot power state, hotplug
>>>    message type. Defined macros for PCI slot power confirmed state in
>>>    hotplug driver.
>>>  * Misc comments from Alexey.
>>>  * Reworked unflatten_dt_node() to avoid recursive function calls.
>>>  * Use EXPORT_SYMBOL_GPL() and document function's input/output - Rob/Frank.
>>> v6:
>>>  * Patch reorder, split, squash - Alexey.
>>>  * Minor coding style - Alexey.
>>>  * Better function names for pcibios_{add,remove}_pci_devices - Bjorn
>>>  * Replace pr_warn() with dev_warn() in PowerNV hotplug driver - Bjorn
>>>  * Concurrent depth as parameter passed to __unflatten_dt_node() - Grant / Alexey
>>>  * Replace overlay with of_changeset - Grant
>>> v5:
>>>  * Rebased to 4.1.rc6 and some unmerged patches as below:
>>>    Alexey's DDW patchset (v11);
>>>    Gavin's EEH error injection support (in mpe's next branch);
>>>    Richard's EEH cleanup patches (in mpe's next branch);
>>>    Richard's EEH support for VF (v7);
>>>    Gavin's misc EEH fixes for 4.2;
>>>  * The revision bases on skiboot corresponding patches (v7):
>>>    https://patchwork.ozlabs.org/patch/480437/
>>>  * Utilize OF overlay to update device-tree with help of newly introduced
>>>    OPAL API opal_get_overlay_dt().
>>>  * Split patches for easy review according to aik's comments.
>>>  * Fix coding style from checkpatchc.pl as pointed by aik.
>>>  * Code cleanup and misc fixup according to aik's input.
>>> v4:
>>>  * Rebased to 4.1.RC1
>>>  * Added API to unflatten FDT blob to device node sub-tree, which is attached
>>>    the indicated parent device node. The original mechanism based on formatted
>>>    string stream has been dropped.
>>>  * The PATCH[v3 09/21] ("powerpc/eeh: Delay probing EEH device during hotplug")
>>>    was picked up sent to linux-ppc@ separately for review as Richard's "VF EEH
>>>    Support" depends on that.
>>> v3:
>>>  * Rebased to 4.1.RC0
>>>  * PowerNV PCI infrasturcture is total refactored in order to support PCI
>>>    hotplug. The PowerNV hotplug driver is also reworked a lot because of
>>>    the changes in skiboot in order to support PCI hotplug.
>>> 
>>> Gavin Shan (50):
>>> PCI: Add pcibios_setup_bridge()
>>> powerpc/pci: Override pcibios_setup_bridge()
>>> powerpc/pci: Cleanup on struct pci_controller_ops
>>> powerpc/powernv: Cleanup on pnv_pci_ioda_controller_ops
>>> powerpc/powernv: Drop pnv_ioda_setup_dev_PE()
>>> powerpc/powernv: Drop phb->bdfn_to_pe()
>>> powerpc/powernv: Reorder fields in struct pnv_phb
>>> powerpc/powernv: Rename PE# fields in struct pnv_phb
>>> powerpc/powernv: Fix initial IO and M32 segmap
>>> powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()
>>> powerpc/powernv: IO and M32 mapping based on PCI device resources
>>> powerpc/powernv: Track M64 segment consumption
>>> powerpc/powernv: Rename M64 related functions
>>> powerpc/powernv: M64 support on P7IOC
>>> powerpc/powernv: Rename pnv_pci_ioda_setup_dma_pe()
>>> powerpc/powernv: Define PNV_IODA1_DMA32_SEGSIZE
>>> powerpc/powernv: Avoid calculating DMA32 segments on PHB3
>>> powerpc/powernv: Remove DMA32 PE list
>>> powerpc/powernv: Track DMA32 segment consumption
>>> powerpc/powernv: Improve DMA32 segment calculation
>>> powerpc/powernv: Increase PE# capacity
>>> powerpc/powernv: Introduce pnv_ioda_init_pe()
>>> powerpc/powernv: Use PE instead of number during setup and release
>>> powerpc/powernv: Allocate PE# in reverse order
>>> powerpc/powernv: Reserve PE for root bus
>>> powerpc/powernv: Create PEs at PCI hot plugging time
>>> powerpc/powernv: Dynamically release PEs
>>> powerpc/pci: Rename pcibios_{add,remove}_pci_devices()
>>> powerpc/pci: Rename pcibios_find_pci_bus()
>>> powerpc/pci: Move pci_find_bus_by_node() around
>>> powerpc/pci: Export pci_add_device_node_info()
>>> powerpc/pci: Introduce pci_remove_device_node_info()
>>> powerpc/pci: Export pci_traverse_device_nodes()
>>> powerpc/pci: Delay populating pdn
>>> powerpc/pci: Don't scan empty slot
>>> powerpc/pci: Update bridge windows on PCI plug
>>> powerpc/powernv: Simplify pnv_eeh_reset()
>>> powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()
>>> powerpc/powernv: Fundamental reset in pnv_pci_reset_secondary_bus()
>>> powerpc/powernv: Support PCI slot ID
>>> powerpc/powernv: Use firmware PCI slot reset infrastructure
>>> powerpc/powernv: Functions to get/set PCI slot status
>>> powerpc/powernv: Select OF_DYNAMIC
>>> drivers/of: Split unflatten_dt_node()
>>> drivers/of: Avoid recursively calling unflatten_dt_node()
>>> drivers/of: Rename unflatten_dt_node()
>>> drivers/of: Specify parent node in of_fdt_unflatten_tree()
>>> drivers/of: Return allocated memory from of_fdt_unflatten_tree()
>>> drivers/of: Export OF changeset functions
>>> PCI/hotplug: PowerPC PowerNV PCI hotplug driver
>>> 
>>> MAINTAINERS                                    |    6 +
>>> arch/powerpc/include/asm/eeh.h                 |    2 +-
>>> arch/powerpc/include/asm/opal-api.h            |   17 +-
>>> arch/powerpc/include/asm/opal.h                |    8 +-
>>> arch/powerpc/include/asm/pci-bridge.h          |   25 +-
>>> arch/powerpc/include/asm/pnv-pci.h             |    7 +
>>> arch/powerpc/include/asm/ppc-pci.h             |    8 +-
>>> arch/powerpc/kernel/eeh_dev.c                  |   19 +-
>>> arch/powerpc/kernel/eeh_driver.c               |   12 +-
>>> arch/powerpc/kernel/pci-common.c               |   16 +-
>>> arch/powerpc/kernel/pci-hotplug.c              |   47 +-
>>> arch/powerpc/kernel/pci_dn.c                   |   85 +-
>>> arch/powerpc/platforms/maple/pci.c             |   34 +-
>>> arch/powerpc/platforms/pasemi/pci.c            |    3 -
>>> arch/powerpc/platforms/powermac/pci.c          |   38 +-
>>> arch/powerpc/platforms/powernv/Kconfig         |    1 +
>>> arch/powerpc/platforms/powernv/eeh-powernv.c   |  173 ++--
>>> arch/powerpc/platforms/powernv/opal-wrappers.S |    4 +
>>> arch/powerpc/platforms/powernv/pci-ioda.c      | 1251 +++++++++++++++---------
>>> arch/powerpc/platforms/powernv/pci.c           |   92 +-
>>> arch/powerpc/platforms/powernv/pci.h           |   62 +-
>>> arch/powerpc/platforms/pseries/msi.c           |    4 +-
>>> arch/powerpc/platforms/pseries/pci_dlpar.c     |   32 -
>>> arch/powerpc/platforms/pseries/setup.c         |    8 +-
>>> drivers/of/dynamic.c                           |   65 +-
>>> drivers/of/fdt.c                               |  378 ++++---
>>> drivers/of/of_private.h                        |    2 +
>>> drivers/of/overlay.c                           |    8 +-
>>> drivers/of/unittest.c                          |    6 +-
>>> drivers/pci/hotplug/Kconfig                    |   12 +
>>> drivers/pci/hotplug/Makefile                   |    3 +
>>> drivers/pci/hotplug/pnv_php.c                  |  866 ++++++++++++++++
>>> drivers/pci/hotplug/rpadlpar_core.c            |    8 +-
>>> drivers/pci/hotplug/rpaphp_core.c              |    4 +-
>>> drivers/pci/hotplug/rpaphp_pci.c               |    4 +-
>>> drivers/pci/setup-bus.c                        |    5 +
>>> include/linux/of_fdt.h                         |    5 +-
>>> include/linux/pci.h                            |    1 +
>>> 38 files changed, 2389 insertions(+), 932 deletions(-)
>>> create mode 100644 drivers/pci/hotplug/pnv_php.c
>>> 
>>> -- 
>>> 2.1.0
>>> 
>> 
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux