Re: [rtc-linux] Re: [PATCH v5 1/4] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Krzysztof,

On 11/07/2015 08:39 AM, Krzysztof Kozlowski wrote:
W dniu 07.11.2015 o 07:33, Rob Herring pisze:
On Fri, Oct 30, 2015 at 11:55:31AM +0530, Alim Akhtar wrote:
From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>

Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
This also supports RTC and three 32.768KHz clock outputs.

Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
---
  Documentation/devicetree/bindings/mfd/s2mps11.txt |   21 ++++++++++++++-------
  1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 890f0b0e1643..4c0543ceec25 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@

-* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator

  The Samsung S2MPS11 is a multi-function device which includes voltage and
  current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,8 +7,12 @@ interfaced to the host controller using an I2C interface. Each sub-block is
  addressed by the host system using different I2C slave addresses.

  Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
-	      or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
+- compatible: Should be one of the following
+	- "samsung,s2mps11-pmic"
+	- "samsung,s2mps13-pmic"
+	- "samsung,s2mps14-pmic"
+	- "samsung,s2mps15-pmic"
+	- "samsung,s2mpu02-pmic".
  - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.

  Optional properties:
@@ -24,7 +28,7 @@ Optional properties:
    unwanted buck warm reset (setting buck voltages to default values).

  Optional nodes:
-- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768

s5m8767 doesn't seem to be documented. Can you please fix or remove.

What exactly do you have in mind?

The s5m8767-clk is already documented as part of clk-s2mps11.c driver:
Documentation/devicetree/bindings/mfd/s2mps11.txt

The main s5m8767 MFD driver is documented as part of regulator driver:
Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt

Yes, this may be confusing... They S2M and S5M family devices share:
  - main mfd driver,
  - rtc driver,
  - clk driver.

but regulator drivers are separate.

Indeed things are documented but in very confusing manners, e.g. compatible name "samsung,s5m8767-pmic" belongs to MFD not regulator.
It should have being in */bindings/mfd/s2mps11.txt
Not sure if it make sense to change it though.

Best regards,
Krzysztof


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux