W dniu 07.11.2015 o 07:33, Rob Herring pisze: > On Fri, Oct 30, 2015 at 11:55:31AM +0530, Alim Akhtar wrote: >> From: Thomas Abraham <thomas.ab@xxxxxxxxxxx> >> >> Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device >> is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators. >> This also supports RTC and three 32.768KHz clock outputs. >> >> Cc: devicetree@xxxxxxxxxxxxxxx >> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx> >> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> >> --- >> Documentation/devicetree/bindings/mfd/s2mps11.txt | 21 ++++++++++++++------- >> 1 file changed, 14 insertions(+), 7 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt >> index 890f0b0e1643..4c0543ceec25 100644 >> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt >> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt >> @@ -1,5 +1,5 @@ >> >> -* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator >> +* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator >> >> The Samsung S2MPS11 is a multi-function device which includes voltage and >> current regulators, RTC, charger controller and other sub-blocks. It is >> @@ -7,8 +7,12 @@ interfaced to the host controller using an I2C interface. Each sub-block is >> addressed by the host system using different I2C slave addresses. >> >> Required properties: >> -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" >> - or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". >> +- compatible: Should be one of the following >> + - "samsung,s2mps11-pmic" >> + - "samsung,s2mps13-pmic" >> + - "samsung,s2mps14-pmic" >> + - "samsung,s2mps15-pmic" >> + - "samsung,s2mpu02-pmic". >> - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. >> >> Optional properties: >> @@ -24,7 +28,7 @@ Optional properties: >> unwanted buck warm reset (setting buck voltages to default values). >> >> Optional nodes: >> -- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 >> +- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768 > > s5m8767 doesn't seem to be documented. Can you please fix or remove. What exactly do you have in mind? The s5m8767-clk is already documented as part of clk-s2mps11.c driver: Documentation/devicetree/bindings/mfd/s2mps11.txt The main s5m8767 MFD driver is documented as part of regulator driver: Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt Yes, this may be confusing... They S2M and S5M family devices share: - main mfd driver, - rtc driver, - clk driver. but regulator drivers are separate. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
