On Wed, 28 Oct 2015, Rob Herring wrote:
> On Tue, Oct 27, 2015 at 5:09 PM, <atull@xxxxxxxxxxxxxxxxxxxxx> wrote:
> > From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> >
> > Add bindings documentation for Altera SOCFPGA bridges:
> > * fpga2sdram
> > * fpga2hps
> > * hps2fpga
> > * lwhps2fpga
> >
> > Signed-off-by: Alan Tull <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
>
> Oops...
Wow. Ugh.
>
> > Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Matthew Gerlach <mgerlach@xxxxxxxxxx>
>
> These should be roughly in order of who did modifications. I'd expect
> you to be last.
I wrote the driver, Matthew, Dinh, and I all made mods.
>
> > ---
> > v2: separate into 2 documents for the 2 drivers
> > v12: bump version to line up with simple-fpga-bus version
> > remove Linux specific notes such as references to sysfs
> > move non-DT specific documentation elsewhere
> > remove bindings that would have been used to pass configuration
> > clean up formatting
> > ---
> > .../bindings/fpga/altera-fpga2sdram-bridge.txt | 18 ++++++++++
> > .../bindings/fpga/altera-hps2fpga-bridge.txt | 36 ++++++++++++++++++++
> > 2 files changed, 54 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
> > create mode 100644 Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> >
> > diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
> > new file mode 100644
> > index 0000000..11eb5b7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
> > @@ -0,0 +1,18 @@
> > +Altera FPGA To SDRAM Bridge Driver
> > +
> > +Required properties:
> > +- compatible : Should contain "altr,socfpga-fpga2sdram-bridge"
> > +
> > +Optional properties:
> > +- label : User-readable name for this bridge.
> > + Default is br<device#>
>
> Why does the user need label? We generally use label to match physical
> labels like "Rear USB port" or "disk LED" or something.
>
I'll remove it.
> > +- init-val : 0 if driver should disable bridge at startup
> > + 1 if driver should enable bridge at startup
>
> Perhaps "bridge-enable" would be a more descriptive name.
>
I could change it to bridge-enable. Alternatively I could have two
booleans that are bridge-enable and bridge-disable as:
bridge-enable : boolean property should be defined if driver should
enable bridge at startup
bridge-disable : boolean property should be defined if driver should
disable bridge at startup
Default if neither bridge-enable or bridge-disable are specified is
driver will leave bridge in its current state.
> And to comment on other replies, I have no problem with this type of
> property in the DT. But yes, configuration type properties will get
> more scrutiny.
>
> > + Default is to leave bridge in current state.
> > +
> > +Example:
> > + fpga2sdram_br: fpgabridge@3 {
> > + compatible = "altr,socfpga-fpga2sdram-bridge";
> > + label = "fpga2sdram";
> > + init-val = <0>;
> > + };
> > diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> > new file mode 100644
> > index 0000000..eb52f3b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> > @@ -0,0 +1,36 @@
> > +Altera FPGA/HPS Bridge Driver
> > +
> > +Required properties:
> > +- compatible : Should contain one of:
> > + "altr,socfpga-hps2fpga-bridge",
> > + "altr,socfpga-lwhps2fpga-bridge", or
> > + "altr,socfpga-fpga2hps-bridge"
> > +- clocks : Clocks used by this module.
> > +
> > +Optional properties:
> > +- label : User-readable name for this bridge.
> > + Default is br<device#>
> > +- init-val : 0 if driver should disable bridge at startup.
> > + 1 if driver should enable bridge at startup.
> > + Default is to leave bridge in its current state.
> > +
> > +Example:
> > + hps_fpgabridge0: fpgabridge@0 {
> > + compatible = "altr,socfpga-hps2fpga-bridge";
> > + label = "hps2fpga";
> > + clocks = <&l4_main_clk>;
> > + init-val = <1>;
> > + };
> > +
> > + hps_fpgabridge1: fpgabridge@1 {
> > + compatible = "altr,socfpga-lwhps2fpga-bridge";
> > + label = "lwhps2fpga";
> > + clocks = <&l4_main_clk>;
> > + init-val = <0>;
> > + };
> > +
> > + hps_fpgabridge2: fpgabridge@2 {
> > + compatible = "altr,socfpga-fpga2hps-bridge";
> > + label = "fpga2hps";
> > + clocks = <&l4_main_clk>;
> > + };
> > --
> > 1.7.9.5
> >
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
