On Tue, Oct 27, 2015 at 5:09 PM, <atull@xxxxxxxxxxxxxxxxxxxxx> wrote: > From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx> > > Add bindings documentation for Altera SOCFPGA bridges: > * fpga2sdram > * fpga2hps > * hps2fpga > * lwhps2fpga > > Signed-off-by: Alan Tull <dinguyen@xxxxxxxxxxxxxxxxxxxxx> Oops... > Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Matthew Gerlach <mgerlach@xxxxxxxxxx> These should be roughly in order of who did modifications. I'd expect you to be last. > --- > v2: separate into 2 documents for the 2 drivers > v12: bump version to line up with simple-fpga-bus version > remove Linux specific notes such as references to sysfs > move non-DT specific documentation elsewhere > remove bindings that would have been used to pass configuration > clean up formatting > --- > .../bindings/fpga/altera-fpga2sdram-bridge.txt | 18 ++++++++++ > .../bindings/fpga/altera-hps2fpga-bridge.txt | 36 ++++++++++++++++++++ > 2 files changed, 54 insertions(+) > create mode 100644 Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt > create mode 100644 Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt > > diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt > new file mode 100644 > index 0000000..11eb5b7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt > @@ -0,0 +1,18 @@ > +Altera FPGA To SDRAM Bridge Driver > + > +Required properties: > +- compatible : Should contain "altr,socfpga-fpga2sdram-bridge" > + > +Optional properties: > +- label : User-readable name for this bridge. > + Default is br<device#> Why does the user need label? We generally use label to match physical labels like "Rear USB port" or "disk LED" or something. > +- init-val : 0 if driver should disable bridge at startup > + 1 if driver should enable bridge at startup Perhaps "bridge-enable" would be a more descriptive name. And to comment on other replies, I have no problem with this type of property in the DT. But yes, configuration type properties will get more scrutiny. > + Default is to leave bridge in current state. > + > +Example: > + fpga2sdram_br: fpgabridge@3 { > + compatible = "altr,socfpga-fpga2sdram-bridge"; > + label = "fpga2sdram"; > + init-val = <0>; > + }; > diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt > new file mode 100644 > index 0000000..eb52f3b > --- /dev/null > +++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt > @@ -0,0 +1,36 @@ > +Altera FPGA/HPS Bridge Driver > + > +Required properties: > +- compatible : Should contain one of: > + "altr,socfpga-hps2fpga-bridge", > + "altr,socfpga-lwhps2fpga-bridge", or > + "altr,socfpga-fpga2hps-bridge" > +- clocks : Clocks used by this module. > + > +Optional properties: > +- label : User-readable name for this bridge. > + Default is br<device#> > +- init-val : 0 if driver should disable bridge at startup. > + 1 if driver should enable bridge at startup. > + Default is to leave bridge in its current state. > + > +Example: > + hps_fpgabridge0: fpgabridge@0 { > + compatible = "altr,socfpga-hps2fpga-bridge"; > + label = "hps2fpga"; > + clocks = <&l4_main_clk>; > + init-val = <1>; > + }; > + > + hps_fpgabridge1: fpgabridge@1 { > + compatible = "altr,socfpga-lwhps2fpga-bridge"; > + label = "lwhps2fpga"; > + clocks = <&l4_main_clk>; > + init-val = <0>; > + }; > + > + hps_fpgabridge2: fpgabridge@2 { > + compatible = "altr,socfpga-fpga2hps-bridge"; > + label = "fpga2hps"; > + clocks = <&l4_main_clk>; > + }; > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html