Hi,
On Friday 25 October 2013 07:45 PM, Kamil Debski wrote:
> Add support for Exynos 5250. This is work-in-progress commit. Not
> for merging.
>
> Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> drivers/phy/Kconfig | 7 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-exynos-usb.c | 10 +
> drivers/phy/phy-exynos-usb.h | 1 +
> drivers/phy/phy-exynos5250-usb.c | 411 ++++++++++++++++++++++++++++++++++++++
> 5 files changed, 430 insertions(+)
> create mode 100644 drivers/phy/phy-exynos5250-usb.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 2f7ac0a..0f598d0 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -36,4 +36,11 @@ config PHY_EXYNOS4212_USB
> help
> Enable USB PHY support for Exynos 4212
>
> +config PHY_EXYNOS5250_USB
> + bool "Support for Exynos 5250"
> + depends on PHY_EXYNOS_USB
This should be a separate driver. Not necessary to use PHY_EXYNOS_USB.
> + depends on SOC_EXYNOS5250
> + help
> + Enable USB PHY support for Exynos 5250
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index ca3dc82..0dff0dd 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_PHY_EXYNOS_USB) += phy-exynos-usb.o
> obj-$(CONFIG_PHY_EXYNOS4210_USB) += phy-exynos4210-usb.o
> obj-$(CONFIG_PHY_EXYNOS4212_USB) += phy-exynos4212-usb.o
> +obj-$(CONFIG_PHY_EXYNOS5250_USB) += phy-exynos5250-usb.o
> diff --git a/drivers/phy/phy-exynos-usb.c b/drivers/phy/phy-exynos-usb.c
> index d4a26df..172b774 100644
> --- a/drivers/phy/phy-exynos-usb.c
> +++ b/drivers/phy/phy-exynos-usb.c
> @@ -212,6 +212,10 @@ extern const struct uphy_config exynos4210_uphy_config;
> extern const struct uphy_config exynos4212_uphy_config;
> #endif
>
> +#ifdef CONFIG_PHY_EXYNOS5250_USB
> +extern const struct uphy_config exynos5250_uphy_config;
> +#endif
> +
> static const struct of_device_id exynos_uphy_of_match[] = {
> #ifdef CONFIG_PHY_EXYNOS4210_USB
> {
> @@ -225,6 +229,12 @@ static const struct of_device_id exynos_uphy_of_match[] = {
> .data = &exynos4212_uphy_config,
> },
> #endif
> +#ifdef CONFIG_PHY_EXYNOS5250_USB
> + {
> + .compatible = "samsung,exynos5250-usbphy",
> + .data = &exynos5250_uphy_config,
> + },
> +#endif
> { },
> };
>
> diff --git a/drivers/phy/phy-exynos-usb.h b/drivers/phy/phy-exynos-usb.h
> index f45cb3c..a9febfa 100644
> --- a/drivers/phy/phy-exynos-usb.h
> +++ b/drivers/phy/phy-exynos-usb.h
> @@ -42,6 +42,7 @@ enum samsung_cpu_type {
> TYPE_S3C64XX,
> TYPE_EXYNOS4210,
> TYPE_EXYNOS4212,
> + TYPE_EXYNOS5250,
No cpu types here.
> };
>
> enum uphy_state {
> diff --git a/drivers/phy/phy-exynos5250-usb.c b/drivers/phy/phy-exynos5250-usb.c
> new file mode 100644
> index 0000000..156093b
> --- /dev/null
> +++ b/drivers/phy/phy-exynos5250-usb.c
> @@ -0,0 +1,411 @@
> +/*
> + * Samsung S5P/EXYNOS SoC series USB PHY driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Kamil Debski <k.debski@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include "phy-exynos-usb.h"
> +
> +/* Exynos USB PHY registers */
> +#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0
> +#define EXYNOS_5250_REFCLKSEL_XO 0x1
> +#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2
> +
> +#define EXYNOS_5250_FSEL_9MHZ6 0x0
> +#define EXYNOS_5250_FSEL_10MHZ 0x1
> +#define EXYNOS_5250_FSEL_12MHZ 0x2
> +#define EXYNOS_5250_FSEL_19MHZ2 0x3
> +#define EXYNOS_5250_FSEL_20MHZ 0x4
> +#define EXYNOS_5250_FSEL_24MHZ 0x5
> +#define EXYNOS_5250_FSEL_50MHZ 0x7
> +
> +/* Normal host */
> +#define EXYNOS_5250_HOSTPHYCTRL0 0x0
> +
> +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL (0x1 << 31)
> +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19
> +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \
> + (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT)
> +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16
> +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \
> + (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT)
> +#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN (0x1 << 11)
> +#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE (0x1 << 10)
> +#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N (0x1 << 9)
> +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7)
> +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7)
> +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7)
> +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7)
> +#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ (0x1 << 6)
> +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP (0x1 << 5)
> +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND (0x1 << 4)
> +#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE (0x1 << 3)
> +#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST (0x1 << 2)
> +#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST (0x1 << 1)
> +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST (0x1 << 0)
> +
> +/* HSIC0 & HSCI1 */
> +#define EXYNOS_5250_HOSTPHYCTRL1 0x10
> +#define EXYNOS_5250_HOSTPHYCTRL2 0x20
> +
> +#define EXYNOS_5250_HOSTPHYCTRLX_REFCLKSEL_MASK (0x3 << 23)
> +#define EXYNOS_5250_HOSTPHYCTRLX_REFCLKDIV_MASK (0x7f << 16)
> +#define EXYNOS_5250_HOSTPHYCTRLX_SIDDQ (0x1 << 6)
> +#define EXYNOS_5250_HOSTPHYCTRLX_FORCESLEEP (0x1 << 5)
> +#define EXYNOS_5250_HOSTPHYCTRLX_FORCESUSPEND (0x1 << 4)
> +#define EXYNOS_5250_HOSTPHYCTRLX_WORDINTERFACE (0x1 << 3)
> +#define EXYNOS_5250_HOSTPHYCTRLX_UTMISWRST (0x1 << 2)
> +#define EXYNOS_5250_HOSTPHYCTRLX_PHYSWRST (0x1 << 0)
> +
> +/* EHCI control */
> +#define EXYNOS_5250_HOSTEHCICTRL 0x30
> +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN (0x1 << 29)
> +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 (0x1 << 28)
> +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 (0x1 << 27)
> +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 (0x1 << 26)
> +#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN (0x1 << 25)
> +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19
> +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
> + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
> +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13
> +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \
> + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT)
> +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7
> +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
> + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
> +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1
> +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \
> + (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT)
> +#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE (0x1 << 0)
> +
> +/* OHCI control */
> +#define EXYNOS_5250_HOSTOHCICTRL 0x34
> +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1
> +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \
> + (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT)
> +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN (0x1 << 0)
> +
> +/* USBOTG */
> +#define EXYNOS_5250_USBOTGSYS 0x38
> +#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET (0x1 << 14)
> +#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG (0x1 << 13)
> +#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST (0x1 << 12)
> +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9
> +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \
> + (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT)
> +#define EXYNOS_5250_USBOTGSYS_ID_PULLUP (0x1 << 8)
> +#define EXYNOS_5250_USBOTGSYS_COMMON_ON (0x1 << 7)
> +#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4
> +#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \
> + (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT)
> +#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP (0x1 << 3)
> +#define EXYNOS_5250_USBOTGSYS_OTGDISABLE (0x1 << 2)
> +#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG (0x1 << 1)
> +#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND (0x1 << 0)
> +
> +/* Isolation, configured in the power management unit */
> +#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x0
> +#define EXYNOS_5250_USB_ISOL_OTG (1 << 0)
> +#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x4
> +#define EXYNOS_5250_USB_ISOL_HOST (1 << 0)
> +
> +enum exynos4x12_phy_id {
> + EXYNOS5250_DEVICE,
> + EXYNOS5250_HOST,
> + EXYNOS5250_HSIC0,
> + EXYNOS5250_HSIC1,
> + EXYNOS5250_NUM_PHYS,
> +};
> +
> +/* exynos5250_rate_to_clk() converts the supplied clock rate to the value that
> + * can be written to the phy register. */
Follow coding guidelines ;-)
> +static u32 exynos5250_rate_to_clk(unsigned long rate)
> +{
> + unsigned int clksel;
> +
> + /* EXYNOS_5250_FSEL_MASK */
> +
> + switch (rate) {
> + case 9600 * KHZ:
> + clksel = EXYNOS_5250_FSEL_9MHZ6;
> + break;
> + case 10 * MHZ:
> + clksel = EXYNOS_5250_FSEL_10MHZ;
> + break;
> + case 12 * MHZ:
> + clksel = EXYNOS_5250_FSEL_12MHZ;
> + break;
> + case 19200 * KHZ:
> + clksel = EXYNOS_5250_FSEL_19MHZ2;
> + break;
> + case 20 * MHZ:
> + clksel = EXYNOS_5250_FSEL_20MHZ;
> + break;
> + case 24 * MHZ:
> + clksel = EXYNOS_5250_FSEL_24MHZ;
> + break;
> + case 50 * MHZ:
> + clksel = EXYNOS_5250_FSEL_50MHZ;
> + break;
> + default:
> + clksel = CLKSEL_ERROR;
> + }
> +
> + return clksel;
> +}
> +
> +static void exynos5250_isol(struct uphy_instance *inst, bool on)
> +{
> + struct uphy_driver *drv = inst->drv;
> + u32 offset;
> + u32 mask;
> + u32 tmp;
> +
> + if (!drv->reg_isol)
> + return;
> +
> + switch (inst->cfg->id) {
> + case EXYNOS5250_DEVICE:
> + offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET;
> + mask = EXYNOS_5250_USB_ISOL_OTG;
> + break;
> + case EXYNOS5250_HOST:
> + offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET;
> + mask = EXYNOS_5250_USB_ISOL_HOST;
> + break;
> + default:
> + return;
> + };
> +
> + tmp = readl(drv->reg_isol + offset);
> + if (on)
> + tmp &= ~mask;
> + else
> + tmp |= mask;
> + writel(tmp, drv->reg_isol + offset);
> +}
> +
> +static void exynos5250_phy_pwr(struct uphy_instance *inst, bool on)
> +{
> + struct uphy_driver *drv = inst->drv;
> + u32 ctrl0;
> + u32 otg;
> + u32 ehci;
> + u32 ohci;
> +
> + switch (inst->cfg->id) {
> + case EXYNOS5250_DEVICE:
> + writel(0, drv->reg_mode);
> +
> + /* OTG configuration */
> + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
> + /* The clock */
> + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
> + otg |= inst->clk << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
> + /* Reset */
> + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
> + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
> + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
> + /* TODO: Clear 4 bits as the old driver does. */
> + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
> + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
> + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
> + EXYNOS_5250_USBOTGSYS_OTGDISABLE;
> + /* Ref clock */
> + otg &= EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
> + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
> + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
> + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
> + udelay(10);
> + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
> + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
> + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
> +
> +
> + break;
> + case EXYNOS5250_HOST:
> + /* Host registers configuration */
> + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
> + /* The clock */
> + ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK;
> + ctrl0 |= inst->clk << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT;
> +
> + /* Reset */
> + ctrl0 &= ~( EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
> + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL |
> + EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
> + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
> + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP);
> + ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
> + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST |
> + EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N;
> + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
> + udelay(10);
> + ctrl0 &= ~( EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
> + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST);
> + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
> +
> + /* OTG configuration */
> + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
> + /* The clock */
> + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
> + otg |= inst->clk << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
> + /* Reset */
> + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
> + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
> + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
> + /* TODO: Clear 4 bits as the old driver does. */
> + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
> + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
> + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
> + EXYNOS_5250_USBOTGSYS_OTGDISABLE;
> + /* Ref clock */
> + otg &= EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
> + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
> + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
> + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
> + udelay(10);
> + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
> + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
> + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
> +
> + /* Enable EHCI DMA burst */
> + ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
> + ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN |
> + EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 |
> + EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 |
> + EXYNOS_5250_HOSTEHCICTRL_ENAINCR16;
> + writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
> +
> + /* OHCI settings */
> + ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
> + /* Let's do some undocumented magic (based on the old driver) */
> + ohci |= 0x1 << 3;
> + writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
> +
> + break;
> + }
> +}
> +
> +static int exynos5250_power_on(struct uphy_instance *inst)
> +{
> + struct uphy_driver *drv = inst->drv;
> +
> + if (inst->state == STATE_ON) {
> + dev_err(drv->dev, "usb phy \"%s\" already on",
> + inst->cfg->label);
> + return -ENODEV;
> + }
> +
> + inst->state = STATE_ON;
> + inst->ref_cnt++;
> + if (inst->ref_cnt > 1)
> + return 0;
> +
> + exynos5250_phy_pwr(inst, 1);
> + exynos5250_isol(inst, 0);
> +
> + /* Power on the device, as it is necessary for HSIC to work */
> + if (inst->cfg->id == EXYNOS5250_HSIC0) {
> + struct uphy_instance *device =
> + &drv->uphy_instances[EXYNOS5250_DEVICE];
> + device->ref_cnt++;
> + if (device->ref_cnt > 1)
> + return 0;
> + exynos5250_phy_pwr(device, 1);
> + exynos5250_isol(device, 0);
> + }
> +
> + return 0;
> +}
> +
> +static int exynos5250_power_off(struct uphy_instance *inst)
> +{
> + struct uphy_driver *drv = inst->drv;
> +
> + if (inst->state == STATE_OFF) {
> + dev_err(drv->dev, "usb phy \"%s\" already off",
> + inst->cfg->label);
> + return -EINVAL;
> + }
> +
> + inst->state = STATE_OFF;
> + inst->ref_cnt--;
> +
> + if (inst->ref_cnt > 0)
> + return 0;
> +
> + exynos5250_isol(inst, 1);
> + exynos5250_phy_pwr(inst, 0);
> +
> + if (inst->cfg->id == EXYNOS5250_HSIC0) {
> + struct uphy_instance *device =
> + &drv->uphy_instances[EXYNOS5250_DEVICE];
> + device->ref_cnt--;
> + if (device->ref_cnt > 0)
> + return 0;
> + exynos5250_isol(device, 1);
> + exynos5250_phy_pwr(device, 0);
> + }
> +
> + return 0;
> +}
> +
> +
> +static const struct common_phy exynos5250_phys[] = {
> + {
> + .label = "device",
> + .type = PHY_DEVICE,
> + .id = EXYNOS5250_DEVICE,
> + .rate_to_clk = exynos5250_rate_to_clk,
> + .power_on = exynos5250_power_on,
> + .power_off = exynos5250_power_off,
> + },
> + {
> + .label = "host",
> + .type = PHY_HOST,
> + .id = EXYNOS5250_HOST,
> + .rate_to_clk = exynos5250_rate_to_clk,
> + .power_on = exynos5250_power_on,
> + .power_off = exynos5250_power_off,
> + },
> + {
> + .label = "hsic0",
> + .type = PHY_HOST,
> + .id = EXYNOS5250_HSIC0,
> + .rate_to_clk = exynos5250_rate_to_clk,
> + .power_on = exynos5250_power_on,
> + .power_off = exynos5250_power_off,
> + },
> + {
> + .label = "hsic1",
> + .type = PHY_HOST,
> + .id = EXYNOS5250_HSIC1,
> + .rate_to_clk = exynos5250_rate_to_clk,
> + .power_on = exynos5250_power_on,
> + .power_off = exynos5250_power_off,
> + },
> + {},
> +};
All this can be removed if you don't use exynos common PHY.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
