Add support for Exynos 5250. This is work-in-progress commit. Not
for merging.
Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-exynos-usb.c | 10 +
drivers/phy/phy-exynos-usb.h | 1 +
drivers/phy/phy-exynos5250-usb.c | 411 ++++++++++++++++++++++++++++++++++++++
5 files changed, 430 insertions(+)
create mode 100644 drivers/phy/phy-exynos5250-usb.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2f7ac0a..0f598d0 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -36,4 +36,11 @@ config PHY_EXYNOS4212_USB
help
Enable USB PHY support for Exynos 4212
+config PHY_EXYNOS5250_USB
+ bool "Support for Exynos 5250"
+ depends on PHY_EXYNOS_USB
+ depends on SOC_EXYNOS5250
+ help
+ Enable USB PHY support for Exynos 5250
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index ca3dc82..0dff0dd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_EXYNOS_USB) += phy-exynos-usb.o
obj-$(CONFIG_PHY_EXYNOS4210_USB) += phy-exynos4210-usb.o
obj-$(CONFIG_PHY_EXYNOS4212_USB) += phy-exynos4212-usb.o
+obj-$(CONFIG_PHY_EXYNOS5250_USB) += phy-exynos5250-usb.o
diff --git a/drivers/phy/phy-exynos-usb.c b/drivers/phy/phy-exynos-usb.c
index d4a26df..172b774 100644
--- a/drivers/phy/phy-exynos-usb.c
+++ b/drivers/phy/phy-exynos-usb.c
@@ -212,6 +212,10 @@ extern const struct uphy_config exynos4210_uphy_config;
extern const struct uphy_config exynos4212_uphy_config;
#endif
+#ifdef CONFIG_PHY_EXYNOS5250_USB
+extern const struct uphy_config exynos5250_uphy_config;
+#endif
+
static const struct of_device_id exynos_uphy_of_match[] = {
#ifdef CONFIG_PHY_EXYNOS4210_USB
{
@@ -225,6 +229,12 @@ static const struct of_device_id exynos_uphy_of_match[] = {
.data = &exynos4212_uphy_config,
},
#endif
+#ifdef CONFIG_PHY_EXYNOS5250_USB
+ {
+ .compatible = "samsung,exynos5250-usbphy",
+ .data = &exynos5250_uphy_config,
+ },
+#endif
{ },
};
diff --git a/drivers/phy/phy-exynos-usb.h b/drivers/phy/phy-exynos-usb.h
index f45cb3c..a9febfa 100644
--- a/drivers/phy/phy-exynos-usb.h
+++ b/drivers/phy/phy-exynos-usb.h
@@ -42,6 +42,7 @@ enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
TYPE_EXYNOS4212,
+ TYPE_EXYNOS5250,
};
enum uphy_state {
diff --git a/drivers/phy/phy-exynos5250-usb.c b/drivers/phy/phy-exynos5250-usb.c
new file mode 100644
index 0000000..156093b
--- /dev/null
+++ b/drivers/phy/phy-exynos5250-usb.c
@@ -0,0 +1,411 @@
+/*
+ * Samsung S5P/EXYNOS SoC series USB PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Kamil Debski <k.debski@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include "phy-exynos-usb.h"
+
+/* Exynos USB PHY registers */
+#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0
+#define EXYNOS_5250_REFCLKSEL_XO 0x1
+#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2
+
+#define EXYNOS_5250_FSEL_9MHZ6 0x0
+#define EXYNOS_5250_FSEL_10MHZ 0x1
+#define EXYNOS_5250_FSEL_12MHZ 0x2
+#define EXYNOS_5250_FSEL_19MHZ2 0x3
+#define EXYNOS_5250_FSEL_20MHZ 0x4
+#define EXYNOS_5250_FSEL_24MHZ 0x5
+#define EXYNOS_5250_FSEL_50MHZ 0x7
+
+/* Normal host */
+#define EXYNOS_5250_HOSTPHYCTRL0 0x0
+
+#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL (0x1 << 31)
+#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19
+#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \
+ (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT)
+#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16
+#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \
+ (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT)
+#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN (0x1 << 11)
+#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE (0x1 << 10)
+#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N (0x1 << 9)
+#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7)
+#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7)
+#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7)
+#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7)
+#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ (0x1 << 6)
+#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP (0x1 << 5)
+#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND (0x1 << 4)
+#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE (0x1 << 3)
+#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST (0x1 << 2)
+#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST (0x1 << 1)
+#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST (0x1 << 0)
+
+/* HSIC0 & HSCI1 */
+#define EXYNOS_5250_HOSTPHYCTRL1 0x10
+#define EXYNOS_5250_HOSTPHYCTRL2 0x20
+
+#define EXYNOS_5250_HOSTPHYCTRLX_REFCLKSEL_MASK (0x3 << 23)
+#define EXYNOS_5250_HOSTPHYCTRLX_REFCLKDIV_MASK (0x7f << 16)
+#define EXYNOS_5250_HOSTPHYCTRLX_SIDDQ (0x1 << 6)
+#define EXYNOS_5250_HOSTPHYCTRLX_FORCESLEEP (0x1 << 5)
+#define EXYNOS_5250_HOSTPHYCTRLX_FORCESUSPEND (0x1 << 4)
+#define EXYNOS_5250_HOSTPHYCTRLX_WORDINTERFACE (0x1 << 3)
+#define EXYNOS_5250_HOSTPHYCTRLX_UTMISWRST (0x1 << 2)
+#define EXYNOS_5250_HOSTPHYCTRLX_PHYSWRST (0x1 << 0)
+
+/* EHCI control */
+#define EXYNOS_5250_HOSTEHCICTRL 0x30
+#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN (0x1 << 29)
+#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 (0x1 << 28)
+#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 (0x1 << 27)
+#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 (0x1 << 26)
+#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN (0x1 << 25)
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
+ (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \
+ (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT)
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
+ (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \
+ (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT)
+#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE (0x1 << 0)
+
+/* OHCI control */
+#define EXYNOS_5250_HOSTOHCICTRL 0x34
+#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1
+#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \
+ (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT)
+#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN (0x1 << 0)
+
+/* USBOTG */
+#define EXYNOS_5250_USBOTGSYS 0x38
+#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET (0x1 << 14)
+#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG (0x1 << 13)
+#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST (0x1 << 12)
+#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9
+#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \
+ (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT)
+#define EXYNOS_5250_USBOTGSYS_ID_PULLUP (0x1 << 8)
+#define EXYNOS_5250_USBOTGSYS_COMMON_ON (0x1 << 7)
+#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4
+#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \
+ (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT)
+#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP (0x1 << 3)
+#define EXYNOS_5250_USBOTGSYS_OTGDISABLE (0x1 << 2)
+#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG (0x1 << 1)
+#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND (0x1 << 0)
+
+/* Isolation, configured in the power management unit */
+#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x0
+#define EXYNOS_5250_USB_ISOL_OTG (1 << 0)
+#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x4
+#define EXYNOS_5250_USB_ISOL_HOST (1 << 0)
+
+enum exynos4x12_phy_id {
+ EXYNOS5250_DEVICE,
+ EXYNOS5250_HOST,
+ EXYNOS5250_HSIC0,
+ EXYNOS5250_HSIC1,
+ EXYNOS5250_NUM_PHYS,
+};
+
+/* exynos5250_rate_to_clk() converts the supplied clock rate to the value that
+ * can be written to the phy register. */
+static u32 exynos5250_rate_to_clk(unsigned long rate)
+{
+ unsigned int clksel;
+
+ /* EXYNOS_5250_FSEL_MASK */
+
+ switch (rate) {
+ case 9600 * KHZ:
+ clksel = EXYNOS_5250_FSEL_9MHZ6;
+ break;
+ case 10 * MHZ:
+ clksel = EXYNOS_5250_FSEL_10MHZ;
+ break;
+ case 12 * MHZ:
+ clksel = EXYNOS_5250_FSEL_12MHZ;
+ break;
+ case 19200 * KHZ:
+ clksel = EXYNOS_5250_FSEL_19MHZ2;
+ break;
+ case 20 * MHZ:
+ clksel = EXYNOS_5250_FSEL_20MHZ;
+ break;
+ case 24 * MHZ:
+ clksel = EXYNOS_5250_FSEL_24MHZ;
+ break;
+ case 50 * MHZ:
+ clksel = EXYNOS_5250_FSEL_50MHZ;
+ break;
+ default:
+ clksel = CLKSEL_ERROR;
+ }
+
+ return clksel;
+}
+
+static void exynos5250_isol(struct uphy_instance *inst, bool on)
+{
+ struct uphy_driver *drv = inst->drv;
+ u32 offset;
+ u32 mask;
+ u32 tmp;
+
+ if (!drv->reg_isol)
+ return;
+
+ switch (inst->cfg->id) {
+ case EXYNOS5250_DEVICE:
+ offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET;
+ mask = EXYNOS_5250_USB_ISOL_OTG;
+ break;
+ case EXYNOS5250_HOST:
+ offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET;
+ mask = EXYNOS_5250_USB_ISOL_HOST;
+ break;
+ default:
+ return;
+ };
+
+ tmp = readl(drv->reg_isol + offset);
+ if (on)
+ tmp &= ~mask;
+ else
+ tmp |= mask;
+ writel(tmp, drv->reg_isol + offset);
+}
+
+static void exynos5250_phy_pwr(struct uphy_instance *inst, bool on)
+{
+ struct uphy_driver *drv = inst->drv;
+ u32 ctrl0;
+ u32 otg;
+ u32 ehci;
+ u32 ohci;
+
+ switch (inst->cfg->id) {
+ case EXYNOS5250_DEVICE:
+ writel(0, drv->reg_mode);
+
+ /* OTG configuration */
+ otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ /* The clock */
+ otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
+ otg |= inst->clk << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
+ /* Reset */
+ otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
+ EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
+ EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
+ /* TODO: Clear 4 bits as the old driver does. */
+ otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
+ EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
+ EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
+ EXYNOS_5250_USBOTGSYS_OTGDISABLE;
+ /* Ref clock */
+ otg &= EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
+ otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
+ EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
+ writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ udelay(10);
+ otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
+ EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
+ EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
+
+
+ break;
+ case EXYNOS5250_HOST:
+ /* Host registers configuration */
+ ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
+ /* The clock */
+ ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK;
+ ctrl0 |= inst->clk << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT;
+
+ /* Reset */
+ ctrl0 &= ~( EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL |
+ EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
+ EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
+ EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP);
+ ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N;
+ writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
+ udelay(10);
+ ctrl0 &= ~( EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST);
+ writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
+
+ /* OTG configuration */
+ otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ /* The clock */
+ otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
+ otg |= inst->clk << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
+ /* Reset */
+ otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
+ EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
+ EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
+ /* TODO: Clear 4 bits as the old driver does. */
+ otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
+ EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
+ EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
+ EXYNOS_5250_USBOTGSYS_OTGDISABLE;
+ /* Ref clock */
+ otg &= EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
+ otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
+ EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
+ writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ udelay(10);
+ otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
+ EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
+ EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
+
+ /* Enable EHCI DMA burst */
+ ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
+ ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN |
+ EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 |
+ EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 |
+ EXYNOS_5250_HOSTEHCICTRL_ENAINCR16;
+ writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
+
+ /* OHCI settings */
+ ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
+ /* Let's do some undocumented magic (based on the old driver) */
+ ohci |= 0x1 << 3;
+ writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
+
+ break;
+ }
+}
+
+static int exynos5250_power_on(struct uphy_instance *inst)
+{
+ struct uphy_driver *drv = inst->drv;
+
+ if (inst->state == STATE_ON) {
+ dev_err(drv->dev, "usb phy \"%s\" already on",
+ inst->cfg->label);
+ return -ENODEV;
+ }
+
+ inst->state = STATE_ON;
+ inst->ref_cnt++;
+ if (inst->ref_cnt > 1)
+ return 0;
+
+ exynos5250_phy_pwr(inst, 1);
+ exynos5250_isol(inst, 0);
+
+ /* Power on the device, as it is necessary for HSIC to work */
+ if (inst->cfg->id == EXYNOS5250_HSIC0) {
+ struct uphy_instance *device =
+ &drv->uphy_instances[EXYNOS5250_DEVICE];
+ device->ref_cnt++;
+ if (device->ref_cnt > 1)
+ return 0;
+ exynos5250_phy_pwr(device, 1);
+ exynos5250_isol(device, 0);
+ }
+
+ return 0;
+}
+
+static int exynos5250_power_off(struct uphy_instance *inst)
+{
+ struct uphy_driver *drv = inst->drv;
+
+ if (inst->state == STATE_OFF) {
+ dev_err(drv->dev, "usb phy \"%s\" already off",
+ inst->cfg->label);
+ return -EINVAL;
+ }
+
+ inst->state = STATE_OFF;
+ inst->ref_cnt--;
+
+ if (inst->ref_cnt > 0)
+ return 0;
+
+ exynos5250_isol(inst, 1);
+ exynos5250_phy_pwr(inst, 0);
+
+ if (inst->cfg->id == EXYNOS5250_HSIC0) {
+ struct uphy_instance *device =
+ &drv->uphy_instances[EXYNOS5250_DEVICE];
+ device->ref_cnt--;
+ if (device->ref_cnt > 0)
+ return 0;
+ exynos5250_isol(device, 1);
+ exynos5250_phy_pwr(device, 0);
+ }
+
+ return 0;
+}
+
+
+static const struct common_phy exynos5250_phys[] = {
+ {
+ .label = "device",
+ .type = PHY_DEVICE,
+ .id = EXYNOS5250_DEVICE,
+ .rate_to_clk = exynos5250_rate_to_clk,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+ {
+ .label = "host",
+ .type = PHY_HOST,
+ .id = EXYNOS5250_HOST,
+ .rate_to_clk = exynos5250_rate_to_clk,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+ {
+ .label = "hsic0",
+ .type = PHY_HOST,
+ .id = EXYNOS5250_HSIC0,
+ .rate_to_clk = exynos5250_rate_to_clk,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+ {
+ .label = "hsic1",
+ .type = PHY_HOST,
+ .id = EXYNOS5250_HSIC1,
+ .rate_to_clk = exynos5250_rate_to_clk,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+ {},
+};
+
+const struct uphy_config exynos5250_uphy_config = {
+ .cpu = TYPE_EXYNOS5250,
+ .num_phys = EXYNOS5250_NUM_PHYS,
+ .phys = exynos5250_phys,
+};
+
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
