On Fri, Sep 27, 2013 at 05:32:16PM +0100, Lukasz Czerwinski wrote: > This patch adds the document for STMicroeletronics Angular Velocity Sensors > driver under Documentation/devicetree/bindings/iio/. > > Signed-off-by: Lukasz Czerwinski <l.czerwinski@xxxxxxxxxxx> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > --- > .../bindings/iio/gyroscope/st_gyroscope.txt | 38 ++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt > > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt b/Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt > new file mode 100644 > index 0000000..8a6a9be > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt > @@ -0,0 +1,38 @@ > +STMicroelectronics Angular Velocity Sensors > + > +Required properties: > + > + - compatible : value should be one of the following: > + (a) "st,l3g4200d" for gyroscope in L3G4200D > + (b) "st,lsm330d-gyro" for gyroscope in LSM330D > + (c) "st,lsm330dl-gyro" for gyroscope in LSM330DL > + (d) "st,lsm330dlc-gyro" for gyroscope in LSM330DLC > + (e) "st,l3gd20" for gyroscope in L3GD20 > + (f) "st,l3gd20h" for gyroscope in L3GD20H > + (g) "st,l3g4is-ui" for gyroscope in L3G4IS > + (h) "st,lsm330-gyro" for gyroscope in LSM330 > + > + - reg : the I2C address of the gyroscope > + > +Optional properties: > + > + - st,drdy-int-pin : redirect DRDY on pin INT1 (1) or pin INT2 (2) (u8) > + > + - interrupts : Interrupt numbers for the ST gyroscopes, as an array > + in case the gyroscope have more interrupt lines: > + <DataReady irq>, > + <Event irq>; > + > + - interrupt-names : Array of strings associated with the interrupt numbers All my comments from patch 11 apply here too. Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html