Hi, This is the second version the patchset that adds device tree and event subsystem support for generic st_common library. I tested my patches with Exynos4x12 board with device tree. I tested sensor LSM330DLC (accelerometer and gyroscope). Triggered buffer and events were tested separately for each sensor. Generally it works fine. I couldn't implement event patch for lsm330dlc gyroscope because I don't have connected gyroscope INT1 pin to SoC. My implementation allows to use event system or triggered buffer by proper declaration of irqs in device tree/platform data. This is a follow-up of the previous patch and it includes following improvements (Jonathan thanks for the review): - new dt bindings, modified according to the suggestions from the thread http://www.spinics.net/lists/linux-iio/msg09646.html - add missing EXPORT_SYMBOL - remove write to const channel specs in st_accel - add global flag which enables event interface to the st_sensors struct - corrected various minor bits and bobs Comments are welcome. [1] - http://www.spinics.net/lists/linux-iio/msg08883.html Thanks Lukasz Lukasz Czerwinski (14): iio: st_common: New interrupt interface iio: st_accel: Add dt bindings iio: st_gyro: Add dt bindings iio: st_mang: Add dt bindings iio: st_pressure: Add dt bindings iio: st_common: Add threshold events support iio: st_accel: Add event subsystem to st_accel driver iio: iio_magn: Add event ops iio: st_gyro: Add event ops iio: iio_press: Add event ops Documentation: Add st_magn binding documentation Documentation: Add st_gyro binding documentation Documentation: Add st_pressure binding documentation Documentation: Add st_accel binding documentation .../iio/accelerometer/st_accelerometer.txt | 40 ++++ .../bindings/iio/barometer/st_barometer.txt | 38 +++ .../bindings/iio/gyroscope/st_gyroscope.txt | 38 +++ .../bindings/iio/magnetometer/st_magnometer.txt | 33 +++ drivers/iio/accel/st_accel.h | 19 +- drivers/iio/accel/st_accel_core.c | 106 ++++++++- drivers/iio/accel/st_accel_i2c.c | 19 +- drivers/iio/accel/st_accel_spi.c | 19 +- drivers/iio/common/st_sensors/st_sensors_core.c | 245 +++++++++++++++++--- drivers/iio/common/st_sensors/st_sensors_i2c.c | 75 +++++- drivers/iio/common/st_sensors/st_sensors_spi.c | 77 +++++- drivers/iio/gyro/st_gyro.h | 15 +- drivers/iio/gyro/st_gyro_core.c | 12 +- drivers/iio/gyro/st_gyro_i2c.c | 18 +- drivers/iio/gyro/st_gyro_spi.c | 18 +- drivers/iio/magnetometer/st_magn.h | 3 +- drivers/iio/magnetometer/st_magn_core.c | 9 +- drivers/iio/magnetometer/st_magn_i2c.c | 12 +- drivers/iio/magnetometer/st_magn_spi.c | 12 +- drivers/iio/pressure/st_pressure.h | 3 +- drivers/iio/pressure/st_pressure_core.c | 14 +- drivers/iio/pressure/st_pressure_i2c.c | 11 +- drivers/iio/pressure/st_pressure_spi.c | 11 +- include/linux/iio/common/st_sensors.h | 87 ++++++- include/linux/platform_data/st_sensors_pdata.h | 2 + 25 files changed, 836 insertions(+), 100 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/accelerometer/st_accelerometer.txt create mode 100644 Documentation/devicetree/bindings/iio/barometer/st_barometer.txt create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/st_magnometer.txt -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
