On Tue, Oct 15, 2013 at 05:49:24PM +0300, Valentin Raevsky wrote: > Add initial support for cm-fx6 module. > > cm-fx6 is a module based on mx6q SoC with the following features: > - Up to 4GB of DDR3 > - 1 LCD/DVI output port > - 1 HDMI output port > - 2 LVDS LCD ports > - Gigabit Ethernet > - Analog Audio > - CAN > - SATA > - NAND > - PCIE > > This patch allows to boot up the module, configures the serial console, > the Ethernet adapter and the hearbeat led. > > Signed-off-by: Valentin Raevsky <valentin@xxxxxxxxxxxxxx> > Acked-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/cm-fx6.dts | 51 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 arch/arm/boot/dts/cm-fx6.dts Please name the file with 'imx6q-' prefix, and add dtb target into arch/arm/boot/dts/Makefile. > > diff --git a/arch/arm/boot/dts/cm-fx6.dts b/arch/arm/boot/dts/cm-fx6.dts > new file mode 100644 > index 0000000..1080215 > --- /dev/null > +++ b/arch/arm/boot/dts/cm-fx6.dts > @@ -0,0 +1,51 @@ > +/* > + * Copyright 2013 CompuLab Ltd. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6q.dtsi" > + > +/ { > + model = "CompuLab CM-FX6"; > + compatible = "compulab,cm-fx6", "fsl,imx6q"; > + > + memory { > + reg = <0x10000000 0x80000000>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + debug-led { > + label = "Heartbeat"; > + gpios = <&gpio2 31 0>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > +}; > + > +&gpmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpmi_nand_1>; > + status = "okay"; > +}; > + > +&fec { Please sort the nodes alphabetically in label names. Shawn > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet_1>; > + phy-mode = "rgmii"; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4_1>; > + status = "okay"; > +}; > -- > 1.7.9.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
