Re: [PATCH 1/2] sata_rcar: Adjust and document device tree bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Oct 15, 2013 at 02:20:06PM +0400, Valentine Barshak wrote:
> This deprecates the "rcar-sata" compatibility string
> and adds the "sata-r8a7779" which complies to the
> preferred <unit>-<soc> format for SH-Mobile devices.
> The DT bindings are documented.
> 
> Signed-off-by: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/ata/sata_rcar.txt | 15 +++++++++++++++
>  arch/arm/boot/dts/r8a7779.dtsi                      |  2 +-
>  drivers/ata/sata_rcar.c                             |  3 ++-
>  3 files changed, 18 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/sata_rcar.txt
> 
> diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> new file mode 100644
> index 0000000..0719115
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> @@ -0,0 +1,15 @@
> +* Renesas R-Car SATA
> +
> +Required properties:
> +- compatible		: should contain "renesas,sata-r8a7779";
> +- reg			: offset and length of the SATA registers;
> +- interrupts		: must consist of one interrupt specifier.
> +
> +Example:
> +
> +sata: sata@fc600000 {
> +	compatible = "renesas,sata-r8a7779";
> +	reg = <0xfc600000 0x2000>;
> +	interrupt-parent = <&gic>;
> +	interrupts = <0 100 0x4>;
> +};
> diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> index da61d27..b1747f5 100644
> --- a/arch/arm/boot/dts/r8a7779.dtsi
> +++ b/arch/arm/boot/dts/r8a7779.dtsi
> @@ -201,7 +201,7 @@
>  	};
>  
>  	sata: sata@fc600000 {
> -		compatible = "renesas,rcar-sata";
> +		compatible = "renesas,sata-r8a7779";
>  		reg = <0xfc600000 0x2000>;
>  		interrupt-parent = <&gic>;
>  		interrupts = <0 100 0x4>;

I think that I would prefer it if the above hunk was submitted
as a patch after the rest of the series has been merged.
After all, renesas,rcar-sata will remain usable exactly for
the purpose of backwards-compatibility. So there is no need
for an atomic change across different subsystems.

> diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
> index c2d95e9..a625cc5 100644
> --- a/drivers/ata/sata_rcar.c
> +++ b/drivers/ata/sata_rcar.c
> @@ -893,7 +893,8 @@ static const struct dev_pm_ops sata_rcar_pm_ops = {
>  #endif
>  
>  static struct of_device_id sata_rcar_match[] = {
> -	{ .compatible = "renesas,rcar-sata", },
> +	{ .compatible = "renesas,rcar-sata", },	/* Deprecated */
> +	{ .compatible = "renesas,sata-r8a7779", },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, sata_rcar_match);
> -- 
> 1.8.3.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux