This modifies and documents R-Car SATA device tree (DT) bindings. The "sata-<SoC>" format is now used for the "compatible" property. Also, a platform device id table is introduced for non-DT support. The device id naming is consistent with the "compatible" DT property format. R-Car Gen2 SATA PHY support is added. PHY initialization method is chosen, based on the device id. Changes from the previous version: * Kept old DT bindings for compatibility * Amended DT bindings documentation Valentine Barshak (2): sata_rcar: Adjust and document device tree bindings sata_rcar: Add R-Car Gen2 SATA support .../devicetree/bindings/ata/sata_rcar.txt | 19 ++++ arch/arm/boot/dts/r8a7779.dtsi | 2 +- arch/arm/mach-shmobile/clock-r8a7779.c | 2 +- arch/arm/mach-shmobile/setup-r8a7779.c | 2 +- drivers/ata/sata_rcar.c | 112 ++++++++++++++++++--- 5 files changed, 118 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/sata_rcar.txt -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
