Re: [PATCH v3 1/1] ARM: dts: AM33XX: Add LCDC info into am335x-evm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Benoit,

On 03/09/2013 16:55, Benoit Parrot wrote:
Hi,

I have not received any feedback on this patch.
It has been pending since the end of June (first post).
Can I get an estimate when it will be included/accepted?

It looks good to me beside a minor comment below.

Could you just rebase it on my lastest git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts branch because it conflicts with the cleanup done by Javier.


On Fri, Aug 23, 2013 at 11:13:56AM -0500, Benoit Parrot wrote:
Add LCDC device node in DT for am33xx
Add LCDC and Panel info in DT for am335x-evm

Changes in v3:
- rebase to 3.11-rc6

Changes in v2:
- remove redundant/unnecessary SoC specific setting in the board dts

Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
---
  arch/arm/boot/dts/am335x-evm.dts |   72 ++++++++++++++++++++++++++++++++++++++
  arch/arm/boot/dts/am33xx.dtsi    |    9 +++++
  2 files changed, 81 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 3aee1a4..b0703f1 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -149,6 +149,40 @@
  				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
  			>;
  		};
+
+		lcd_pins_s0: lcd_pins_s0 {
+			pinctrl-single,pins = <
+				0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+				0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+				0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+				0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+				0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+				0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+				0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+				0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+				0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+				0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+				0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+				0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+				0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+				0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+				0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+				0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+				0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+				0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+				0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+				0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+				0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+				0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+				0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+				0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+				0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+				0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+				0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+				0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+			>;
+		};
+
  	};

  	ocp {
@@ -311,6 +345,10 @@
  				};
  			};
  		};
+
+		lcdc: lcdc@4830e000 {
+			status = "okay";
+		};
  	};

  	vbat: fixedregulator@0 {
@@ -374,6 +412,40 @@
  		brightness-levels = <0 51 53 56 62 75 101 152 255>;
  		default-brightness-level = <8>;
  	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";

Nit: There are a lots of TI here :-)
Could you just name it: ti,lcdc,panel ?

Thanks,
Benoit

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux