Hi,
I have not received any feedback on this patch.
It has been pending since the end of June (first post).
Can I get an estimate when it will be included/accepted?
Thanks,
Benoit
On Fri, Aug 23, 2013 at 11:13:56AM -0500, Benoit Parrot wrote:
> Add LCDC device node in DT for am33xx
> Add LCDC and Panel info in DT for am335x-evm
>
> Changes in v3:
> - rebase to 3.11-rc6
>
> Changes in v2:
> - remove redundant/unnecessary SoC specific setting in the board dts
>
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> ---
> arch/arm/boot/dts/am335x-evm.dts | 72 ++++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/am33xx.dtsi | 9 +++++
> 2 files changed, 81 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 3aee1a4..b0703f1 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -149,6 +149,40 @@
> 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> >;
> };
> +
> + lcd_pins_s0: lcd_pins_s0 {
> + pinctrl-single,pins = <
> + 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
> + 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
> + 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
> + 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
> + 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
> + 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
> + 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
> + 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
> + 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */
> + 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */
> + 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */
> + 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */
> + 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */
> + 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */
> + 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */
> + 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */
> + 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */
> + 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */
> + 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */
> + 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */
> + 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */
> + 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */
> + 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */
> + 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */
> + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
> + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
> + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
> + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
> + >;
> + };
> +
> };
>
> ocp {
> @@ -311,6 +345,10 @@
> };
> };
> };
> +
> + lcdc: lcdc@4830e000 {
> + status = "okay";
> + };
> };
>
> vbat: fixedregulator@0 {
> @@ -374,6 +412,40 @@
> brightness-levels = <0 51 53 56 62 75 101 152 255>;
> default-brightness-level = <8>;
> };
> +
> + panel {
> + compatible = "ti,tilcdc,panel";
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&lcd_pins_s0>;
> + panel-info {
> + ac-bias = <255>;
> + ac-bias-intrpt = <0>;
> + dma-burst-sz = <16>;
> + bpp = <32>;
> + fdd = <0x80>;
> + sync-edge = <0>;
> + sync-ctrl = <1>;
> + raster-order = <0>;
> + fifo-th = <0>;
> + };
> +
> + display-timings {
> + 800x480p62 {
> + clock-frequency = <30000000>;
> + hactive = <800>;
> + vactive = <480>;
> + hfront-porch = <39>;
> + hback-porch = <39>;
> + hsync-len = <47>;
> + vback-porch = <29>;
> + vfront-porch = <13>;
> + vsync-len = <2>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + };
> + };
> + };
> };
>
> #include "tps65910.dtsi"
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 38b446b..a302fd6 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -530,5 +530,14 @@
> #size-cells = <1>;
> status = "disabled";
> };
> +
> + lcdc: lcdc@4830e000 {
> + compatible = "ti,am33xx-tilcdc";
> + reg = <0x4830e000 0x1000>;
> + interrupt-parent = <&intc>;
> + interrupts = <36>;
> + ti,hwmods = "lcdc";
> + status = "disabled";
> + };
> };
> };
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
