Phy mode can be configured via the cpsw-phy-sel driver, this patch enabled the cpsw driver to utilise the api provided by the cpsw-phy-sel driver to configure the phy mode. Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx> Tested-by: Daniel Mack <zonque@xxxxxxxxx> --- drivers/net/ethernet/ti/cpsw.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 01c42e1..5efb37b 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1021,6 +1021,10 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) dev_info(priv->dev, "phy found : id is : 0x%x\n", slave->phy->phy_id); phy_start(slave->phy); + + /* Configure GMII_SEL register */ + cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, + slave->slave_num); } } -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
