The cpsw currently lacks code to properly set up the hardware interface mode on AM33xx. Other platforms might be equally affected. Usually, the bootloader will configure the control module register, so probably that's why such support wasn't needed in the past. In suspend mode though, this register is modified, and so it needs reprogramming after resume. This patch adds a new driver in which hardware interface can configure correct register bits when the slave is opened. The AM33xx also has a bit for each slave to configure the RMII reference clock direction. Setting it is now supported by a per-slave DT property. This code path introducted by this patch is currently exclusive for am33xx and same can be extened to various platforms via the DT compatibility property. Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx> Tested-by: Daniel Mack <zonque@xxxxxxxxx> --- .../devicetree/bindings/net/cpsw-phy-sel.txt | 28 ++++ drivers/net/ethernet/ti/Kconfig | 8 + drivers/net/ethernet/ti/Makefile | 1 + drivers/net/ethernet/ti/cpsw-phy-sel.c | 161 +++++++++++++++++++++ drivers/net/ethernet/ti/cpsw.h | 2 + 5 files changed, 200 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/cpsw-phy-sel.txt create mode 100644 drivers/net/ethernet/ti/cpsw-phy-sel.c diff --git a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt new file mode 100644 index 0000000..7ff57a1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt @@ -0,0 +1,28 @@ +TI CPSW Phy mode Selection Device Tree Bindings +----------------------------------------------- + +Required properties: +- compatible : Should be "ti,am3352-cpsw-phy-sel" +- reg : physical base address and size of the cpsw + registers map +- reg-names : names of the register map given in "reg" node + +Optional properties: +-rmii-clock-ext : If present, the driver will configure the RMII + interface to external clock usage + +Examples: + + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + }; + +(or) + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + rmii-clock-ext; + }; diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index de71b1e..53150c2 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -49,11 +49,19 @@ config TI_DAVINCI_CPDMA To compile this driver as a module, choose M here: the module will be called davinci_cpdma. This is recommended. +config TI_CPSW_PHY_SEL + boolean "TI CPSW Switch Phy sel Support" + depends on TI_CPSW + ---help--- + This driver supports configuring of the phy mode connected to + the CPSW. + config TI_CPSW tristate "TI CPSW Switch Support" depends on ARM && (ARCH_DAVINCI || SOC_AM33XX) select TI_DAVINCI_CPDMA select TI_DAVINCI_MDIO + select TI_CPSW_PHY_SEL ---help--- This driver supports TI's CPSW Ethernet Switch. diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile index c65148e..9cfaab8 100644 --- a/drivers/net/ethernet/ti/Makefile +++ b/drivers/net/ethernet/ti/Makefile @@ -7,5 +7,6 @@ obj-$(CONFIG_CPMAC) += cpmac.o obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o +obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o obj-$(CONFIG_TI_CPSW) += ti_cpsw.o ti_cpsw-y := cpsw_ale.o cpsw.o cpts.o diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c new file mode 100644 index 0000000..e092ede --- /dev/null +++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c @@ -0,0 +1,161 @@ +/* Texas Instruments Ethernet Switch Driver + * + * Copyright (C) 2013 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include "cpsw.h" + +/* AM33xx SoC specific definitions for the CONTROL port */ +#define AM33XX_GMII_SEL_MODE_MII 0 +#define AM33XX_GMII_SEL_MODE_RMII 1 +#define AM33XX_GMII_SEL_MODE_RGMII 2 + +#define AM33XX_GMII_SEL_RMII2_IO_CLK_EN BIT(7) +#define AM33XX_GMII_SEL_RMII1_IO_CLK_EN BIT(6) + +struct cpsw_phy_sel_priv { + struct device *dev; + u32 __iomem *gmii_sel; + bool rmii_clock_external; + void (*cpsw_phy_sel)(struct cpsw_phy_sel_priv *priv, + phy_interface_t phy_mode, int slave); +}; + + +static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv, + phy_interface_t phy_mode, int slave) +{ + u32 reg; + u32 mask; + u32 mode = 0; + + reg = readl(priv->gmii_sel); + + switch (phy_mode) { + case PHY_INTERFACE_MODE_RMII: + mode = AM33XX_GMII_SEL_MODE_RMII; + break; + + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + mode = AM33XX_GMII_SEL_MODE_RGMII; + break; + + case PHY_INTERFACE_MODE_MII: + default: + mode = AM33XX_GMII_SEL_MODE_MII; + break; + }; + + mask = 0x3 << (slave * 2) | BIT(slave + 6); + mode <<= slave * 2; + + if (priv->rmii_clock_external) { + if (slave == 0) + mode |= AM33XX_GMII_SEL_RMII1_IO_CLK_EN; + else + mode |= AM33XX_GMII_SEL_RMII2_IO_CLK_EN; + } + + reg &= ~mask; + reg |= mode; + + writel(reg, priv->gmii_sel); +} + +static struct platform_driver cpsw_phy_sel_driver; +static int match(struct device *dev, void *data) +{ + struct device_node *node = (struct device_node *)data; + return dev->of_node == node && + dev->driver == &cpsw_phy_sel_driver.driver; +} + +void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave) +{ + struct device_node *node; + struct cpsw_phy_sel_priv *priv; + + node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel"); + if (!node) { + dev_err(dev, "Phy mode driver DT not found\n"); + return; + } + + dev = bus_find_device(&platform_bus_type, NULL, node, match); + priv = dev_get_drvdata(dev); + + priv->cpsw_phy_sel(priv, phy_mode, slave); +} +EXPORT_SYMBOL_GPL(cpsw_phy_sel); + +static const struct of_device_id cpsw_phy_sel_id_table[] = { + { + .compatible = "ti,am3352-cpsw-phy-sel", + .data = &cpsw_gmii_sel_am3352, + }, + {} +}; +MODULE_DEVICE_TABLE(of, cpsw_phy_sel_id_table); + +static int cpsw_phy_sel_probe(struct platform_device *pdev) +{ + struct resource *res; + const struct of_device_id *of_id; + struct cpsw_phy_sel_priv *priv; + + of_id = of_match_node(cpsw_phy_sel_id_table, pdev->dev.of_node); + if (!of_id) + return -EINVAL; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "unable to alloc memory for cpsw phy sel\n"); + return -ENOMEM; + } + + priv->cpsw_phy_sel = of_id->data; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gmii-sel"); + priv->gmii_sel = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->gmii_sel)) + return PTR_ERR(priv->gmii_sel); + + if (of_find_property(pdev->dev.of_node, "rmii-clock-ext", NULL)) + priv->rmii_clock_external = true; + + dev_set_drvdata(&pdev->dev, priv); + + return 0; +} + +static struct platform_driver cpsw_phy_sel_driver = { + .probe = cpsw_phy_sel_probe, + .driver = { + .name = "cpsw-phy-sel", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(cpsw_phy_sel_id_table), + }, +}; + +module_platform_driver(cpsw_phy_sel_driver); +MODULE_AUTHOR("Mugunthan V N <mugunthanvnm@xxxxxx>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h index eb3e101..574f49d 100644 --- a/drivers/net/ethernet/ti/cpsw.h +++ b/drivers/net/ethernet/ti/cpsw.h @@ -39,4 +39,6 @@ struct cpsw_platform_data { bool dual_emac; /* Enable Dual EMAC mode */ }; +void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave); + #endif /* __CPSW_H__ */ -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html