On 09/17/2013 10:51 AM, Pawel Moll wrote: > Uh, sorry, missed one... > > On Tue, 2013-09-17 at 17:36 +0100, Pawel Moll wrote: >> On Mon, 2013-09-16 at 20:52 +0100, Stephen Warren wrote: >>>> +- arm,pl11x,panel-data-pads: array of 24 cells, each of them describing >>>> + a function of one of the CLD pads, >>>> + starting from 0 up to 23; each pad can >>>> + be described by one of the following values: >>>> + - 0: reserved (not connected) >>>> + - 0x100-0x107: color upper STN panel data 0 to 7 >>> ... >>> >>> I assume those are the raw values that go into the HW? > > No, they can be considered "labels", defining the way pads are used > (wired). Then, basing on this information, the driver is configuring the > cell, eg. selecting STN or TFT mode (thus switching the output between > panel formatter and raw RGB data source). Oh, why not just use the raw values from the HW registers for this? -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html