Dear Stephen Warren, > On 09/13/2013 10:54 AM, Mike Dunn wrote: > > This patch adds device tree support to the PXA's PWM driver. Only an OF > > match table is added; nothing needs to be extracted from the device tree > > node. The existing ID table is reused for the match table data. > > > > Tested on a Palm Treo 680 (both platform data and DT cases). > > > > diff --git a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt > > b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt > > > > +- compatible: should be one of: > > + - "marvell,pxa250-pwm" > > + - "marvell,pxa270-pwm" > > + - "marvell,pxa168-pwm" > > + - "marvell,pxa910-pwm" > > Not just one of, but possible more than one... > > > diff --git a/arch/arm/boot/dts/pxa27x.dtsi > > b/arch/arm/boot/dts/pxa27x.dtsi > > > > + pwm0: pwm@40b00000 { > > + compatible = "marvell,pxa270-pwm"; > > I thought the assertion was that pax270 and pxa250 were both compatible? > If so, that should be: > > compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; I see what you mean with the compatible strings ... but if we have this "fallback" compatiblity string, do we also need the table of all chips sporting the IP block in the driver itself? Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html