On Thu, Sep 12, 2013 at 03:03:16PM +0100, David Woodhouse wrote: > On Thu, 2013-09-12 at 14:43 +0100, Mark Brown wrote: > > > > So to go back to your question: the commands that it "knows" we are > going to send are indeed specific to (one particular type of) SPI NOR > flash. But there's nothing on the MTD side which justifies that > assumption. Even if you use a different type of SPI NOR flash which uses > different opcodes for its commands, this broken scheme will fall over. Beside the quad-read/ddr-quad-read commands, all the commands needed by this driver is common. If we do not enable the quad-read, this driver can works with the fast-read mode. If we use a different NOR which uses different opcodes (different quad-read opcodes ?), i should add a small patch to fix it. I think i should follow Mark's advice to split out the quad-read code. thanks Huang Shijie -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
