Add fec phy gpio reset for imx6sl evk board. imx6sl evk board use GPIO4_21 to do phy reset, so add phy-reset-gpios and phy-reset-duration propery initial for fec device node. Signed-off-by: Fugang Duan <B38611@xxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6sl-evk.dts | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 2886a59..c4d32a5 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -23,6 +23,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; + phy-reset-gpios = <&gpio4 21 0>; /* GPIO4_21 */ + phy-reset-duration = <1>; status = "okay"; }; @@ -38,6 +40,7 @@ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x80000000 >; }; }; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
