This patch adds the Kconfig and Makefile glue to compile the GPIO driver for bcm281xx when CONFIG_GPIO_BCM=y. Signed-off-by: Markus Mayer <markus.mayer@xxxxxxxxxx> Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx> Reviewed-by: Matt Porter <matt.porter@xxxxxxxxxx> --- arch/arm/mach-bcm/Kconfig | 1 - drivers/gpio/Kconfig | 7 +++++++ drivers/gpio/Makefile | 1 + 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index f112895..2dfbf06 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -9,7 +9,6 @@ config ARCH_BCM select CLKSRC_OF select GENERIC_CLOCKEVENTS select GENERIC_TIME - select GPIO_BCM select SPARSE_IRQ select TICK_ONESHOT help diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b2450ba..869e234 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -714,6 +714,13 @@ config GPIO_MSIC Enable support for GPIO on intel MSIC controllers found in intel MID devices +config GPIO_BCM_KONA + bool "Broadcom Kona GPIO" + depends on ARCH_BCM + default y + help + Turn on GPIO support for Broadcom "Kona" chips. + comment "USB GPIO expanders:" config GPIO_VIPERBOARD diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index ef3e983..fcd0751 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o +obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html