This patch series adds the GPIO driver, and its device tree bindings, for the Broadcom bcm281xx family of chips. Changes since v3: - removed global variables - removed inline functions for register access - removed bcm_kona_gpio_request() & bcm_kona_gpio_free() - removed bcm_kona_gpio_remove() for now - fixed MODULE_DEVICE_TABLE - added chip-specific compatibility value to device tree binding - added missing "#interrupt-cells = <2>;" to device tree binding - device tree binding document comes with code patch (rather than DT patch) - turn on GPIO by defaulting to 'y', not by selecting based on platform - use symbolic values in device tree file - some additional clean-up & error-checking Markus Mayer (3): ARM: bcm281xx: Add GPIO driver ARM: bcm281xx: Enable GPIO driver ARM: bcm281xx: Device Tree bindings for GPIO driver .../devicetree/bindings/gpio/gpio-bcm-kona.txt | 43 ++ arch/arm/boot/dts/bcm11351.dtsi | 16 + arch/arm/mach-bcm/Kconfig | 1 - drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-bcm-kona.c | 658 ++++++++++++++++++++ 6 files changed, 725 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt create mode 100644 drivers/gpio/gpio-bcm-kona.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
