Re: [PATCH v2 1/7] ARM: dts: Move display-timimg information inside FIMD DT node for exynos5250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi All,

On Thu, Aug 1, 2013 at 8:19 PM, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> Hi Vikas,
>
> On Tuesday 30 of July 2013 16:49:32 Vikas Sajjan wrote:
>> As the display-timing information is parsed by FIMD driver, it makes
>> sense to move the display-timimg DT node inside FIMD DT node for
>> exynos5250
>>
>> Signed-off-by: Vikas Sajjan <vikas.sajjan@xxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/exynos5250-smdk5250.dts |   29
>> ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13
>> deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 49f18c2..d176dbb
>> 100644
>> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> @@ -262,19 +262,22 @@
>>               pinctrl-0 = <&dp_hpd>;
>>       };
>>
>> -     display-timings {
>> -             native-mode = <&timing0>;
>> -             timing0: timing@0 {
>> -                     /* 1280x800 */
>> -                     clock-frequency = <50000>;
>> -                     hactive = <1280>;
>> -                     vactive = <800>;
>> -                     hfront-porch = <4>;
>> -                     hback-porch = <4>;
>> -                     hsync-len = <4>;
>> -                     vback-porch = <4>;
>> -                     vfront-porch = <4>;
>> -                     vsync-len = <4>;
>> +     fimd@14400000 {
>> +             status = "okay";
>> +             display-timings {
>> +                     native-mode = <&timing0>;
>> +                     timing0: timing@0 {
>> +                             /* 1280x800 */
>> +                             clock-frequency = <50000>;
>> +                             hactive = <1280>;
>> +                             vactive = <800>;
>> +                             hfront-porch = <4>;
>> +                             hback-porch = <4>;
>> +                             hsync-len = <4>;
>> +                             vback-porch = <4>;
>> +                             vfront-porch = <4>;
>> +                             vsync-len = <4>;
>> +                     };
>>               };
>>       };
>
> Looks good to me, but I would like some other people from the device tree
> mailing list to comment on node naming: Do we want to conform to the
> recommendation of ePAPR about node naming, which states that node names
> should be generic, not platform specific or we are free to ignore it?
>

Any more comments on this series.

> Best regards,
> Tomasz
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux