Hello.
Could please anybody take a look on these patches? Should I change
anything? From my point of view, these patches are finished and ready
for merge since November.
I did a rebase and I am attaching a fresh copy of my patches.
Thank you.
Lumír
On 12/11/18 9:35 AM, Lumir Balhar wrote:
On 12/3/18 8:33 AM, David Gibson wrote:
On Mon, Nov 26, 2018 at 02:56:04PM +0100, Lumir Balhar wrote:
On 11/25/18 11:27 AM, David Gibson wrote:
On Tue, Nov 20, 2018 at 01:13:48PM +0100, Lumir Balhar wrote:
Hello.
Could we please finish this?
Yes, sorry. I did some preliminary changes aiming towards
simultaneous testing of Python2 and Python3, but then got side tracked
before completing it.
No worries.
I did a rebase of all my patches to the top of current master
branch. My py3
branch is available here: https://github.com/frenzymadness/dtc/
and all
patches are attached.
Thanks.
When I test it with Python 2 or Python 3, everything works. Python
version
has to be specified by environment variable PYTHON in order to
change the
default (python2).
$ make check
DEP tests/dumptrees.c
DEP tests/trees.S
DEP tests/testutils.c
DEP tests/value-labels.c
…
Basic sanity check for the FdtRo class ... ok
testCreate (__main__.PyLibfdtSwTests) ... ok
----------------------------------------------------------------------
Ran 35 tests in 0.004s
OK
********** TEST SUMMARY
* Total testcases: 1826
* PASS: 1826
* FAIL: 0
* Bad configuration: 0
* Strange test result: 0
**********
$ PYTHON=python3 make check
DEP tests/dumptrees.c
DEP tests/trees.S
DEP tests/testutils.c
DEP tests/value-labels.c
…
********** TEST SUMMARY
* Total testcases: 1790
* PASS: 1790
* FAIL: 0
* Bad configuration: 0
* Strange test result: 0
**********
So, the reason many less tests are run in this case is that the
Python3 setup.py uses a different name for the extension moule .so.
That means that the test scripts think there isn't Python support and
doesn't run those tests. We need to at least fix that before this is
ready to go.
That's a great point! In my latest version I am able to run all
tests under
both Python 2 and 3. However, Python 3 module has to be renamed
after build.
With Python 2:
$ make check
…
********** TEST SUMMARY
* Total testcases: 1880
* PASS: 1880
* FAIL: 0
* Bad configuration: 0
* Strange test result: 0
**********
WIth Python 3:
$ PYTHON=python3 make
$ mv pylibfdt/_libfdt{.cpython-37m-x86_64-linux-gnu,}.so
$ PYTHON=python3 make check
…
********** TEST SUMMARY
* Total testcases: 1880
* PASS: 1880
* FAIL: 0
* Bad configuration: 0
* Strange test result: 0
**********
Right. The trick is we need to work out how to either not make the
tests depend on the extension module being in that exact file, or
automatically move it as part of the build, and we need to do so in a
way that's robust across Python revisions.
The question is whether we need to support dual stack with both
Pythons in
the same time or not.
I'd certainly prefer it, but one at a time is better than nothing.
If yes, we have to find a way how to store both built modules and
pick the
right one for tests.
Exactly. In fact I think if we don't override the destination
setuptools will already put the modules in different locations. The
trick is working out how to make our tests link against the right one
at runtime.
I rebased all changes to the top of current master and attaching all
patches again.
I did one more small change in run_tests.sh file where Python module
is now recognized for both Python versions.
So now, you can run all tests without any manual work.
$ git clean -fdx
$ make check
…
OK
********** TEST SUMMARY
* Total testcases: 1880
* PASS: 1880
* FAIL: 0
* Bad configuration: 0
* Strange test result: 0
**********
$ git clean -fdx
$ PYTHON=python3 make check
…
OK
********** TEST SUMMARY
* Total testcases: 1880
* PASS: 1880
* FAIL: 0
* Bad configuration: 0
* Strange test result: 0
**********
You can also have dual stack support but it needs Python 3 version to
be built first. Otherwise, when you build Python 2 extension first,
build of Python 3 extension is skipped because _libfdt.so file is
detected so make skips the build. The other way around, it works
because Python 3 produces .so file with a platform suffix in its name
and therefore it's not detected by make.
Is this sufficient?
Have a nice day. Lumír
If no, we can just rename it automatically after every build to the
standard
name _libfdt.so
Right, but while that's easy to do by hand, working out how to
reliably do it automatically isn't quite so obvious.
What is the preferred way?
I've merged some bits and pieces from your series, and I've made a few
other changes to get this closer. I hope this time I can actually get
to the rest soon.
Great, thanks. I did some more small changes, rebased and I am
attaching all
patches again (except the one already merged, of course).
>From 064a470664f8ac78162033602e7621b0d207618e Mon Sep 17 00:00:00 2001
From: Lumir Balhar <lbalhar@xxxxxxxxxx>
Date: Tue, 10 Jul 2018 09:08:07 +0200
Subject: [PATCH 4/4] pylibfdt: Change how passing tests are recognized
When some warning appears in test result, "ok" is still
at the end of the line but without three dots.
Signed-off-by: Lumir Balhar <lbalhar@xxxxxxxxxx>
---
tests/run_tests.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
index ca3fc86..1fa14ff 100755
--- a/tests/run_tests.sh
+++ b/tests/run_tests.sh
@@ -940,7 +940,7 @@ pylibfdt_tests () {
# and the summary line for total tests (e.g. 'Ran 17 tests in
0.002s').
# We could add pass + fail to get total tests, but this
provides a useful
# sanity check.
- pass_count=$(grep "\.\.\. ok$" $TMP | wc -l)
+ pass_count=$(grep "ok$" $TMP | wc -l)
fail_count=$(grep "^ERROR: " $TMP | wc -l)
total_tests=$(sed -n 's/^Ran \([0-9]*\) tests.*$/\1/p' $TMP)
cat $TMP
>From 8a19d132ca0db7e10ec816a39ae660f728df9e9d Mon Sep 17 00:00:00 2001
From: Petr Viktorin <pviktori@xxxxxxxxxx>
Date: Mon, 9 Jul 2018 14:59:30 +0200
Subject: [PATCH 3/4] pylibfdt: Test fdt.setprop take bytes on Python
3, add
error handling
Signed-off-by: Petr Viktorin <pviktori@xxxxxxxxxx>
---
pylibfdt/libfdt.i | 4 ++++
tests/pylibfdt_tests.py | 12 +++++++-----
2 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/pylibfdt/libfdt.i b/pylibfdt/libfdt.i
index 084bc5b..4f14403 100644
--- a/pylibfdt/libfdt.i
+++ b/pylibfdt/libfdt.i
@@ -1084,6 +1084,10 @@ typedef uint32_t fdt32_t;
/* typemap used for fdt_setprop() */
%typemap(in) (const void *val) {
%#if PY_VERSION_HEX >= 0x03000000
+ if (!PyBytes_Check($input)) {
+ SWIG_exception_fail(SWIG_TypeError, "bytes expected in
method '" "$symname"
+ "', argument " "$argnum"" of type '" "$type""'");
+ }
$1 = PyBytes_AsString($input);
%#else
$1 = PyString_AsString($input); /* char *str */
diff --git a/tests/pylibfdt_tests.py b/tests/pylibfdt_tests.py
index 4761c52..e6c13ff 100644
--- a/tests/pylibfdt_tests.py
+++ b/tests/pylibfdt_tests.py
@@ -82,6 +82,8 @@ TEST_VALUE64_1 = (TEST_VALUE64_1H << 32) |
TEST_VALUE64_1L
PHANDLE_1 = 0x2000
PHANDLE_2 = 0x2001
+TEST_BYTES_1 = b'hello world'
+
TEST_STRING_1 = 'hello world'
TEST_STRING_2 = 'hi world'
TEST_STRING_3 = u'unicode \u01d3'
@@ -443,21 +445,21 @@ class PyLibfdtBasicTests(unittest.TestCase):
def testSetProp(self):
"""Test that we can update and create properties"""
node = self.fdt.path_offset('/subnode@1')
- self.fdt.setprop(node, 'compatible', TEST_STRING_1)
- self.assertEquals(TEST_STRING_1, self.fdt.getprop(node,
'compatible'))
+ self.fdt.setprop(node, 'compatible', TEST_BYTES_1)
+ self.assertEquals(TEST_BYTES_1, self.fdt.getprop(node,
'compatible'))
# Check that this property is missing, and that we don't
have space to
# add it
self.assertEquals(-libfdt.NOTFOUND,
self.fdt.getprop(node, 'missing',
QUIET_NOTFOUND))
self.assertEquals(-libfdt.NOSPACE,
- self.fdt.setprop(node, 'missing',
TEST_STRING_1,
+ self.fdt.setprop(node, 'missing',
TEST_BYTES_1,
quiet=(libfdt.NOSPACE,)))
# Expand the device tree so we now have room
self.fdt.resize(self.fdt.totalsize() + 50)
- self.fdt.setprop(node, 'missing', TEST_STRING_1)
- self.assertEquals(TEST_STRING_1, self.fdt.getprop(node,
'missing'))
+ self.fdt.setprop(node, 'missing', TEST_BYTES_1)
+ self.assertEquals(TEST_BYTES_1, self.fdt.getprop(node,
'missing'))
def testSetPropU32(self):
"""Test that we can update and create integer properties"""
>From c96c95413f0432fe1bf36796d5c8027b36ac5b93 Mon Sep 17 00:00:00 2001
From: Lumir Balhar <lbalhar@xxxxxxxxxx>
Date: Mon, 9 Jul 2018 12:41:13 +0200
Subject: [PATCH 2/4] pylibfdt: check_err accepts only integer as a
first
argument.
A list passed as an argument to check_err() means that
there is no error code to check and therefore it should
be returned back.
Signed-off-by: Lumir Balhar <lbalhar@xxxxxxxxxx>
---
pylibfdt/libfdt.i | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/pylibfdt/libfdt.i b/pylibfdt/libfdt.i
index 6f1f1dc..084bc5b 100644
--- a/pylibfdt/libfdt.i
+++ b/pylibfdt/libfdt.i
@@ -137,7 +137,7 @@ def check_err(val, quiet=()):
Raises
FdtException if val < 0
"""
- if val < 0:
+ if isinstance(val, int) and val < 0:
if -val not in quiet:
raise FdtException(val)
return val
>From 751a34fee080c9aaca6033aad9501a849a1ab8a7 Mon Sep 17 00:00:00 2001
From: Lumir Balhar <lbalhar@xxxxxxxxxx>
Date: Mon, 9 Jul 2018 12:40:09 +0200
Subject: [PATCH 1/4] pylibfdt: Proper handling of bytes/unicode
strings and
octal literals
Signed-off-by: Lumir Balhar <lbalhar@xxxxxxxxxx>
---
pylibfdt/libfdt.i | 14 +++++++++++---
tests/pylibfdt_tests.py | 20 ++++++++++----------
2 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/pylibfdt/libfdt.i b/pylibfdt/libfdt.i
index 462b5b0..6f1f1dc 100644
--- a/pylibfdt/libfdt.i
+++ b/pylibfdt/libfdt.i
@@ -669,7 +669,7 @@ class Fdt(FdtRo):
Raises:
FdtException if no parent found or other error occurs
"""
- val = val.encode('utf-8') + '\0'
+ val = val.encode('utf-8') + b'\0'
return check_err(fdt_setprop(self._fdt, nodeoffset,
prop_name,
val, len(val)), quiet)
@@ -1074,12 +1074,20 @@ typedef uint32_t fdt32_t;
if (!$1)
$result = Py_None;
else
- $result = Py_BuildValue("s#", $1, *arg4);
+ %#if PY_VERSION_HEX >= 0x03000000
+ $result = Py_BuildValue("y#", $1, *arg4);
+ %#else
+ $result = Py_BuildValue("s#", $1, *arg4);
+ %#endif
}
/* typemap used for fdt_setprop() */
%typemap(in) (const void *val) {
- $1 = PyString_AsString($input); /* char *str */
+ %#if PY_VERSION_HEX >= 0x03000000
+ $1 = PyBytes_AsString($input);
+ %#else
+ $1 = PyString_AsString($input); /* char *str */
+ %#endif
}
/* typemaps used for fdt_next_node() */
diff --git a/tests/pylibfdt_tests.py b/tests/pylibfdt_tests.py
index 34c680d..4761c52 100644
--- a/tests/pylibfdt_tests.py
+++ b/tests/pylibfdt_tests.py
@@ -84,7 +84,7 @@ PHANDLE_2 = 0x2001
TEST_STRING_1 = 'hello world'
TEST_STRING_2 = 'hi world'
-TEST_STRING_3 = u'unicode ' + unichr(467)
+TEST_STRING_3 = u'unicode \u01d3'
def get_err(err_code):
@@ -107,7 +107,7 @@ def _ReadFdt(fname):
Returns:
Fdt bytearray suitable for passing to libfdt functions
"""
- return libfdt.Fdt(open(fname).read())
+ return libfdt.Fdt(open(fname, mode='rb').read())
class PyLibfdtBasicTests(unittest.TestCase):
"""Test class for basic pylibfdt access functions
@@ -164,7 +164,7 @@ class PyLibfdtBasicTests(unittest.TestCase):
def testBadFdt(self):
"""Check that a filename provided accidentally is not
accepted"""
with self.assertRaises(FdtException) as e:
- fdt = libfdt.Fdt('a string')
+ fdt = libfdt.Fdt(b'a string')
self.assertEquals(e.exception.err, -libfdt.BADMAGIC)
def testSubnodeOffset(self):
@@ -239,7 +239,7 @@ class PyLibfdtBasicTests(unittest.TestCase):
poffset = self.fdt.first_property_offset(root)
prop = self.fdt.get_property_by_offset(poffset)
self.assertEquals(prop.name, 'compatible')
- self.assertEquals(prop, 'test_tree1\0')
+ self.assertEquals(prop, b'test_tree1\0')
with self.assertRaises(FdtException) as e:
self.fdt.get_property_by_offset(-2)
@@ -252,7 +252,7 @@ class PyLibfdtBasicTests(unittest.TestCase):
"""Check that we can read the contents of a property by
name"""
root = self.fdt.path_offset('/')
value = self.fdt.getprop(root, "compatible")
- self.assertEquals(value, 'test_tree1\0')
+ self.assertEquals(value, b'test_tree1\0')
self.assertEquals(-libfdt.NOTFOUND, self.fdt.getprop(root,
'missing',
QUIET_NOTFOUND))
@@ -262,7 +262,7 @@ class PyLibfdtBasicTests(unittest.TestCase):
node = self.fdt.path_offset('/subnode@1/subsubnode')
value = self.fdt.getprop(node, "compatible")
- self.assertEquals(value, 'subsubnode1\0subsubnode\0')
+ self.assertEquals(value, b'subsubnode1\0subsubnode\0')
def testStrError(self):
"""Check that we can get an error string"""
@@ -591,7 +591,7 @@ class PyLibfdtSwTests(unittest.TestCase):
# Make sure we can read from the tree too
node = sw.path_offset('/subnode@1')
- self.assertEqual('subnode1' + chr(0), sw.getprop(node,
'compatible'))
+ self.assertEqual(b'subnode1\0', sw.getprop(node,
'compatible'))
# Make sure we did at least two resizes
self.assertTrue(len(fdt.as_bytearray()) > FdtSw.INC_SIZE * 2)
@@ -609,15 +609,15 @@ class PyLibfdtRoTests(unittest.TestCase):
def setUp(self):
"""Read in the device tree we use for testing"""
- self.fdt = libfdt.FdtRo(open('test_tree1.dtb').read())
+ self.fdt = libfdt.FdtRo(open('test_tree1.dtb',
mode='rb').read())
def testAccess(self):
"""Basic sanity check for the FdtRo class"""
node = self.fdt.path_offset('/subnode@1')
- self.assertEqual('subnode1' + chr(0),
+ self.assertEqual(b'subnode1\0',
self.fdt.getprop(node, 'compatible'))
node = self.fdt.first_subnode(node)
- self.assertEqual('this is a placeholder string\0string2\0',
+ self.assertEqual(b'this is a placeholder string\0string2\0',
self.fdt.getprop(node, 'placeholder'))
>From 7cd51089b206063a23d0bb0d24cb2f8c6d5d695b Mon Sep 17 00:00:00 2001
From: Lumir Balhar <lbalhar@xxxxxxxxxx>
Date: Mon, 9 Jul 2018 12:40:09 +0200
Subject: [PATCH 1/5] pylibfdt: Proper handling of bytes/unicode strings and
octal literals
Signed-off-by: Lumir Balhar <lbalhar@xxxxxxxxxx>
---
pylibfdt/libfdt.i | 14 +++++++++++---
tests/pylibfdt_tests.py | 20 ++++++++++----------
2 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/pylibfdt/libfdt.i b/pylibfdt/libfdt.i
index 462b5b0..6f1f1dc 100644
--- a/pylibfdt/libfdt.i
+++ b/pylibfdt/libfdt.i
@@ -669,7 +669,7 @@ class Fdt(FdtRo):
Raises:
FdtException if no parent found or other error occurs
"""
- val = val.encode('utf-8') + '\0'
+ val = val.encode('utf-8') + b'\0'
return check_err(fdt_setprop(self._fdt, nodeoffset, prop_name,
val, len(val)), quiet)
@@ -1074,12 +1074,20 @@ typedef uint32_t fdt32_t;
if (!$1)
$result = Py_None;
else
- $result = Py_BuildValue("s#", $1, *arg4);
+ %#if PY_VERSION_HEX >= 0x03000000
+ $result = Py_BuildValue("y#", $1, *arg4);
+ %#else
+ $result = Py_BuildValue("s#", $1, *arg4);
+ %#endif
}
/* typemap used for fdt_setprop() */
%typemap(in) (const void *val) {
- $1 = PyString_AsString($input); /* char *str */
+ %#if PY_VERSION_HEX >= 0x03000000
+ $1 = PyBytes_AsString($input);
+ %#else
+ $1 = PyString_AsString($input); /* char *str */
+ %#endif
}
/* typemaps used for fdt_next_node() */
diff --git a/tests/pylibfdt_tests.py b/tests/pylibfdt_tests.py
index 34c680d..4761c52 100644
--- a/tests/pylibfdt_tests.py
+++ b/tests/pylibfdt_tests.py
@@ -84,7 +84,7 @@ PHANDLE_2 = 0x2001
TEST_STRING_1 = 'hello world'
TEST_STRING_2 = 'hi world'
-TEST_STRING_3 = u'unicode ' + unichr(467)
+TEST_STRING_3 = u'unicode \u01d3'
def get_err(err_code):
@@ -107,7 +107,7 @@ def _ReadFdt(fname):
Returns:
Fdt bytearray suitable for passing to libfdt functions
"""
- return libfdt.Fdt(open(fname).read())
+ return libfdt.Fdt(open(fname, mode='rb').read())
class PyLibfdtBasicTests(unittest.TestCase):
"""Test class for basic pylibfdt access functions
@@ -164,7 +164,7 @@ class PyLibfdtBasicTests(unittest.TestCase):
def testBadFdt(self):
"""Check that a filename provided accidentally is not accepted"""
with self.assertRaises(FdtException) as e:
- fdt = libfdt.Fdt('a string')
+ fdt = libfdt.Fdt(b'a string')
self.assertEquals(e.exception.err, -libfdt.BADMAGIC)
def testSubnodeOffset(self):
@@ -239,7 +239,7 @@ class PyLibfdtBasicTests(unittest.TestCase):
poffset = self.fdt.first_property_offset(root)
prop = self.fdt.get_property_by_offset(poffset)
self.assertEquals(prop.name, 'compatible')
- self.assertEquals(prop, 'test_tree1\0')
+ self.assertEquals(prop, b'test_tree1\0')
with self.assertRaises(FdtException) as e:
self.fdt.get_property_by_offset(-2)
@@ -252,7 +252,7 @@ class PyLibfdtBasicTests(unittest.TestCase):
"""Check that we can read the contents of a property by name"""
root = self.fdt.path_offset('/')
value = self.fdt.getprop(root, "compatible")
- self.assertEquals(value, 'test_tree1\0')
+ self.assertEquals(value, b'test_tree1\0')
self.assertEquals(-libfdt.NOTFOUND, self.fdt.getprop(root, 'missing',
QUIET_NOTFOUND))
@@ -262,7 +262,7 @@ class PyLibfdtBasicTests(unittest.TestCase):
node = self.fdt.path_offset('/subnode@1/subsubnode')
value = self.fdt.getprop(node, "compatible")
- self.assertEquals(value, 'subsubnode1\0subsubnode\0')
+ self.assertEquals(value, b'subsubnode1\0subsubnode\0')
def testStrError(self):
"""Check that we can get an error string"""
@@ -591,7 +591,7 @@ class PyLibfdtSwTests(unittest.TestCase):
# Make sure we can read from the tree too
node = sw.path_offset('/subnode@1')
- self.assertEqual('subnode1' + chr(0), sw.getprop(node, 'compatible'))
+ self.assertEqual(b'subnode1\0', sw.getprop(node, 'compatible'))
# Make sure we did at least two resizes
self.assertTrue(len(fdt.as_bytearray()) > FdtSw.INC_SIZE * 2)
@@ -609,15 +609,15 @@ class PyLibfdtRoTests(unittest.TestCase):
def setUp(self):
"""Read in the device tree we use for testing"""
- self.fdt = libfdt.FdtRo(open('test_tree1.dtb').read())
+ self.fdt = libfdt.FdtRo(open('test_tree1.dtb', mode='rb').read())
def testAccess(self):
"""Basic sanity check for the FdtRo class"""
node = self.fdt.path_offset('/subnode@1')
- self.assertEqual('subnode1' + chr(0),
+ self.assertEqual(b'subnode1\0',
self.fdt.getprop(node, 'compatible'))
node = self.fdt.first_subnode(node)
- self.assertEqual('this is a placeholder string\0string2\0',
+ self.assertEqual(b'this is a placeholder string\0string2\0',
self.fdt.getprop(node, 'placeholder'))
--
2.20.1
>From e6bba27fceff460d7dc6a08cfedfcce7077a5f4e Mon Sep 17 00:00:00 2001
From: Lumir Balhar <lbalhar@xxxxxxxxxx>
Date: Mon, 9 Jul 2018 12:41:13 +0200
Subject: [PATCH 2/5] pylibfdt: check_err accepts only integer as a first
argument.
A list passed as an argument to check_err() means that
there is no error code to check and therefore it should
be returned back.
Signed-off-by: Lumir Balhar <lbalhar@xxxxxxxxxx>
---
pylibfdt/libfdt.i | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/pylibfdt/libfdt.i b/pylibfdt/libfdt.i
index 6f1f1dc..084bc5b 100644
--- a/pylibfdt/libfdt.i
+++ b/pylibfdt/libfdt.i
@@ -137,7 +137,7 @@ def check_err(val, quiet=()):
Raises
FdtException if val < 0
"""
- if val < 0:
+ if isinstance(val, int) and val < 0:
if -val not in quiet:
raise FdtException(val)
return val
--
2.20.1
>From 71059464bc37c6f0473fe5b3afef0d7cd2b5c7d2 Mon Sep 17 00:00:00 2001
From: Petr Viktorin <pviktori@xxxxxxxxxx>
Date: Mon, 9 Jul 2018 14:59:30 +0200
Subject: [PATCH 3/5] pylibfdt: Test fdt.setprop take bytes on Python 3, add
error handling
Signed-off-by: Petr Viktorin <pviktori@xxxxxxxxxx>
---
pylibfdt/libfdt.i | 4 ++++
tests/pylibfdt_tests.py | 12 +++++++-----
2 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/pylibfdt/libfdt.i b/pylibfdt/libfdt.i
index 084bc5b..4f14403 100644
--- a/pylibfdt/libfdt.i
+++ b/pylibfdt/libfdt.i
@@ -1084,6 +1084,10 @@ typedef uint32_t fdt32_t;
/* typemap used for fdt_setprop() */
%typemap(in) (const void *val) {
%#if PY_VERSION_HEX >= 0x03000000
+ if (!PyBytes_Check($input)) {
+ SWIG_exception_fail(SWIG_TypeError, "bytes expected in method '" "$symname"
+ "', argument " "$argnum"" of type '" "$type""'");
+ }
$1 = PyBytes_AsString($input);
%#else
$1 = PyString_AsString($input); /* char *str */
diff --git a/tests/pylibfdt_tests.py b/tests/pylibfdt_tests.py
index 4761c52..e6c13ff 100644
--- a/tests/pylibfdt_tests.py
+++ b/tests/pylibfdt_tests.py
@@ -82,6 +82,8 @@ TEST_VALUE64_1 = (TEST_VALUE64_1H << 32) | TEST_VALUE64_1L
PHANDLE_1 = 0x2000
PHANDLE_2 = 0x2001
+TEST_BYTES_1 = b'hello world'
+
TEST_STRING_1 = 'hello world'
TEST_STRING_2 = 'hi world'
TEST_STRING_3 = u'unicode \u01d3'
@@ -443,21 +445,21 @@ class PyLibfdtBasicTests(unittest.TestCase):
def testSetProp(self):
"""Test that we can update and create properties"""
node = self.fdt.path_offset('/subnode@1')
- self.fdt.setprop(node, 'compatible', TEST_STRING_1)
- self.assertEquals(TEST_STRING_1, self.fdt.getprop(node, 'compatible'))
+ self.fdt.setprop(node, 'compatible', TEST_BYTES_1)
+ self.assertEquals(TEST_BYTES_1, self.fdt.getprop(node, 'compatible'))
# Check that this property is missing, and that we don't have space to
# add it
self.assertEquals(-libfdt.NOTFOUND,
self.fdt.getprop(node, 'missing', QUIET_NOTFOUND))
self.assertEquals(-libfdt.NOSPACE,
- self.fdt.setprop(node, 'missing', TEST_STRING_1,
+ self.fdt.setprop(node, 'missing', TEST_BYTES_1,
quiet=(libfdt.NOSPACE,)))
# Expand the device tree so we now have room
self.fdt.resize(self.fdt.totalsize() + 50)
- self.fdt.setprop(node, 'missing', TEST_STRING_1)
- self.assertEquals(TEST_STRING_1, self.fdt.getprop(node, 'missing'))
+ self.fdt.setprop(node, 'missing', TEST_BYTES_1)
+ self.assertEquals(TEST_BYTES_1, self.fdt.getprop(node, 'missing'))
def testSetPropU32(self):
"""Test that we can update and create integer properties"""
--
2.20.1
>From 2af27bb94aa85158fb88517989688e321d480d43 Mon Sep 17 00:00:00 2001
From: Lumir Balhar <lbalhar@xxxxxxxxxx>
Date: Tue, 10 Jul 2018 09:08:07 +0200
Subject: [PATCH 4/5] pylibfdt: Change how passing tests are recognized
When some warning appears in test result, "ok" is still
at the end of the line but without three dots.
Signed-off-by: Lumir Balhar <lbalhar@xxxxxxxxxx>
---
tests/run_tests.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
index ca3fc86..1fa14ff 100755
--- a/tests/run_tests.sh
+++ b/tests/run_tests.sh
@@ -940,7 +940,7 @@ pylibfdt_tests () {
# and the summary line for total tests (e.g. 'Ran 17 tests in 0.002s').
# We could add pass + fail to get total tests, but this provides a useful
# sanity check.
- pass_count=$(grep "\.\.\. ok$" $TMP | wc -l)
+ pass_count=$(grep "ok$" $TMP | wc -l)
fail_count=$(grep "^ERROR: " $TMP | wc -l)
total_tests=$(sed -n 's/^Ran \([0-9]*\) tests.*$/\1/p' $TMP)
cat $TMP
--
2.20.1
>From 5d4895268e1b51f7950430f94050801b2f7fd62b Mon Sep 17 00:00:00 2001
From: Lumir Balhar <lbalhar@xxxxxxxxxx>
Date: Tue, 11 Dec 2018 09:16:02 +0100
Subject: [PATCH 5/5] pylibfdt:tests: Extend the way how to find a Python
module
Python 3 C extensions have suffix containing platform, Python version
and another details in the name so the condition has to be extended.
Signed-off-by: Lumir Balhar <lbalhar@xxxxxxxxxx>
---
tests/run_tests.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
index 1fa14ff..04fc1e8 100755
--- a/tests/run_tests.sh
+++ b/tests/run_tests.sh
@@ -973,7 +973,7 @@ if [ -z "$TESTSETS" ]; then
TESTSETS="libfdt utilfdt dtc dtbs_equal fdtget fdtput fdtdump fdtoverlay"
# Test pylibfdt if the libfdt Python module is available.
- if [ -f ../pylibfdt/_libfdt.so ]; then
+ if [ -f ../pylibfdt/_libfdt.so ] || [ -f ../pylibfdt/_libfdt.cpython-3*.so ]; then
TESTSETS="$TESTSETS pylibfdt"
fi
fi
--
2.20.1
