On pią, 2015-01-16 at 12:10 +0100, Mason wrote: > On 16/01/2015 10:08, Krzysztof Kozlowski wrote: > > > On 2015-01-15 at 18:24 +0100, Mason wrote: > > > >> This is a follow-up to my previous thread. > >> "How many frequencies would cpufreq optimally like to manage?" > >> http://thread.gmane.org/gmane.linux.ports.arm.kernel/373669 > >> > >> As I originally wrote, I'm running 3.14 on an ARM Cortex-A9 > >> based SoC (namely Tango4 from Sigma Designs). I'd like to get > >> some feedback on the cpufreq driver I wrote for that platform. > >> > >> I decided to expose only a small subset of frequencies (namely > >> {999,500,333,111} MHz) because, in my tests, the ondemand gov > >> chose mostly min and max, and the intermediate frequencies not > >> so much; so I figured "2 intermediate freqs" is good enough. > >> (I'm ready to hear otherwise.) > > I'll take a closer look at other drivers, but I'd like to hear > opinions on the subject. > > >> I tried to use as much generic framework as possible, but I've > >> read about the clk framework, and it looks to be an even greater > >> generalization. Are new platforms encouraged to use that, rather > >> than provide a cpufreq driver? Does it work when voltage scaling > >> comes in play? (This SoC doesn't have it, but the next will.) > > > > The clock framework generalizes clocks, not cpufreq. Ideally you should > > use clock framework in cpufreq driver. So instead manually setting > > divider just do something like: > > > > ret = clk_set_rate(cpu_clk, freq_exact); > > if (ret) { > > dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); > > return ret; > > } > > I will give clk a closer look. > > > For voltage scaling you should use regulator framework. > > OK. I'm also interested in frequency-throttling when temperatures > rise beyond specific thresholds. What subsystem ties sensors and > cpufreq together? I believe thermal. > > > Actually I think existing cpufreq-dt could serve your purpose. Why don't > > you try it? Or look at it and use as an example. > > Will do. I've heard of device tree, but know nothing about it. Indeed it is driver meant to be used with Device Tree but beside DT code it nicely shows how to scale the frequency CPU. If you don't use DT then you can use only the set_target() as starting point. On 3.14 the "cpufreq-dt" could be called "cpufreq-cpu0". > > >> I'm also wondering how cpufreq and cpuidle interact? Is one a > >> subset of the other? Are they orthogonal? > > > > cpuidle and cpufreq are different subsystems. They don't interact, yet. > > There are efforts to combine scheduler, cpufreq and cpuidle but this is > > future. If your SoC has some deeper low power states than developing > > cpuidle driver makes sense. If not - WFI will be used. > > AFAIU, there are no deeper power states on the Cortex-A9. > > I didn't find where WFI is called :-( > > In kernel/cpu/idle.c (file seems to have been removed in 3.15) > cpu_idle_loop() calls arch_cpu_idle() > http://lxr.free-electrons.com/source/kernel/cpu/idle.c?v=3.14#L98 > > In arch/kernel/process.c > http://lxr.free-electrons.com/source/arch/arm/kernel/process.c?v=3.14#L173 > /* > * Called from the core idle loop. > */ > void arch_cpu_idle(void) > { > if (cpuidle_idle_call()) > default_idle(); > } > > default_idle calls cpu_do_idle (by default), a macro for cpu_v7_do_idle > which executes dsb+wfi, BUT... > > ifndef CONFIG_CPU_IDLE then > static inline int cpuidle_idle_call(void) { return -ENODEV; } > > Does that mean I MUST define CONFIG_CPU_IDLE if I want the idle > loop to call wfi (to save power), even if I don't have a cpuidle > driver? On current kernels you don't have to. But on 3.14... seems yes. Best regards, Krzysztof > > Regards. -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
