On Mon, Jun 23, 2014 at 7:38 AM, amit daniel kachhap
<amit.daniel@xxxxxxxxxxx> wrote:
>
> On Tue, Jun 17, 2014 at 8:55 PM, Thomas Abraham <thomas.ab@xxxxxxxxxxx> wrote:
> > From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> >
> > The CPU clock provider supplies the clock to the CPU clock domain. The
> > composition and organization of the CPU clock provider could vary among
> > Exynos SoCs. A CPU clock provider can be composed of clock mux, dividers
> > and gates. This patch defines a new clock type for CPU clock provider and
> > adds infrastructure to register the CPU clock providers for Samsung
> > platforms.
> Thomas,
>
> The overall code structuring looks very neat. Few minor and some
> optimization points are suggested below,
> After updating them you can add and sorry for late review.
> Reviewed-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
>
>
> >
> > Cc: Tomasz Figa <t.figa@xxxxxxxxxxx>
> > Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> > ---
> > drivers/clk/samsung/Makefile | 2 +-
> > drivers/clk/samsung/clk-cpu.c | 577 +++++++++++++++++++++++++++++++++++++++++
> > drivers/clk/samsung/clk.h | 5 +
> > 3 files changed, 583 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/clk/samsung/clk-cpu.c
> >
> > diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> > index 69e8177..f4edd31 100644
> > --- a/drivers/clk/samsung/Makefile
> > +++ b/drivers/clk/samsung/Makefile
> > @@ -2,7 +2,7 @@
> > # Samsung Clock specific Makefile
> > #
> >
> > -obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
> > +obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o clk-cpu.o
> > obj-$(CONFIG_SOC_EXYNOS3250) += clk-exynos3250.o
> > obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
> > obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
> > diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
> > new file mode 100644
> > index 0000000..c40f7b5
> > --- /dev/null
> > +++ b/drivers/clk/samsung/clk-cpu.c
> > @@ -0,0 +1,577 @@
> > +/*
> > + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> > + * Author: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This file contains the utility functions to register the CPU clocks
> > + * for Samsung platforms.
> > +*/
> > +
> > +#include <linux/errno.h>
> > +#include "clk.h"
> > +
> > +#define E4210_SRC_CPU 0x0
> > +#define E4210_STAT_CPU 0x200
> > +#define E4210_DIV_CPU0 0x300
> > +#define E4210_DIV_CPU1 0x304
> > +#define E4210_DIV_STAT_CPU0 0x400
> > +#define E4210_DIV_STAT_CPU1 0x404
> > +
> > +#define MAX_DIV 8
> > +#define DIV_MASK 7
> > +#define DIV_MASK_ALL 0xffffffff
> > +#define MUX_MASK 7
> > +
> > +#define E4210_DIV0_RATIO0_MASK 0x7
> > +#define E4210_DIV1_HPM_MASK ((0x7 << 4) | (0x7 << 0))
> > +#define E4210_MUX_HPM_MASK (1 << 20)
> > +#define E4210_DIV0_ATB_SHIFT 16
> > +#define E4210_DIV0_ATB_MASK (DIV_MASK << E4210_DIV0_ATB_SHIFT)
> > +
> > +#define E4210_CPU_DIV0(apll, pclk_dbg, atb, periph, corem1, corem0) \
> > + (((apll) << 24) | ((pclk_dbg) << 20) | ((atb) << 16) | \
> > + ((periph) << 12) | ((corem1) << 8) | ((corem0) << 4))
> > +#define E4210_CPU_DIV1(hpm, copy) \
> > + (((hpm) << 4) | ((copy) << 0))
> > +
> > +#define E5250_CPU_DIV0(apll, pclk_dbg, atb, periph, acp, cpud) \
> > + (((apll << 24) | (pclk_dbg << 20) | (atb << 16) | \
> > + (periph << 12) | (acp << 8) | (cpud << 4)))
> > +#define E5250_CPU_DIV1(hpm, copy) \
> > + (((hpm) << 4) | (copy))
> > +
> > +#define E5420_EGL_DIV0(apll, pclk_dbg, atb, cpud) \
> > + (((apll << 24) | (pclk_dbg << 20) | (atb << 16) | \
> > + (cpud << 4)))
> > +#define E5420_KFC_DIV(kpll, pclk, aclk) \
> > + (((kpll << 24) | (pclk << 20) | (aclk << 4)))
> > +
> > +enum cpuclk_type {
> > + EXYNOS4210,
> > + EXYNOS5250,
> > + EXYNOS5420,
> > +};
> > +
> > +/**
> > + * struct exynos4210_cpuclk_data: config data to setup cpu clocks.
> > + * @prate: frequency of the primary parent clock (in KHz).
> > + * @div0: value to be programmed in the div_cpu0 register.
> > + * @div1: value to be programmed in the div_cpu1 register.
> > + *
> > + * This structure holds the divider configuration data for dividers in the CPU
> > + * clock domain. The parent frequency at which these divider values are valid is
> > + * specified in @prate. The @prate is the frequency of the primary parent clock.
> > + * For CPU clock domains that do not have a DIV1 register, the @div1 member
> > + * is optional.
> > + */
> > +struct exynos4210_cpuclk_data {
> > + unsigned long prate;
> > + unsigned int div0;
> > + unsigned int div1;
> > +};
> This structure is used for infact all exynos SOCs, if possible see if
> this can be renamed to exynos_cpuclk_data.
> > +
> > +/**
> > + * struct exynos_cpuclk: information about clock supplied to a CPU core.
> > + * @hw: handle between CCF and CPU clock.
> > + * @alt_parent: alternate parent clock to use when switching the speed
> > + * of the primary parent clock.
> > + * @ctrl_base: base address of the clock controller.
> > + * @offset: offset from the ctrl_base address where the CPU clock div/mux
> > + * registers can be accessed.
> > + * @lock: cpu clock domain register access lock.
> > + * @type: type of the CPU clock.
> > + * @data: optional data which the actual instantiation of this clock
> > + * can use.
> > + * @clk_nb: clock notifier registered for changes in clock speed of the
> > + * primary parent clock.
> > + * @pre_rate_cb: callback function to handle PRE_RATE_CHANGE notification
> > + * of the primary parent clock.
> > + * @post_rate_cb: callback function to handle POST_RATE_CHANGE notification
> > + * of the primary parent clock.
> > + *
> > + * This structure holds information required for programming the cpu clock for
> > + * various clock speeds.
> > + */
> > +struct exynos_cpuclk {
> > + struct clk_hw hw;
> > + struct clk *alt_parent;
> > + void __iomem *ctrl_base;
> > + unsigned long offset;
> > + spinlock_t *lock;
> > + enum cpuclk_type type;
> > + const void *data;
> > + struct notifier_block clk_nb;
> > + int (*pre_rate_cb)(struct clk_notifier_data *,
> > + struct exynos_cpuclk *,
> > + void __iomem *base);
> > + int (*post_rate_cb)(struct clk_notifier_data *,
> > + struct exynos_cpuclk *,
> > + void __iomem *base);
> > +};
> > +
> > +#define to_exynos_cpuclk_hw(hw) container_of(hw, struct exynos_cpuclk, hw)
> > +#define to_exynos_cpuclk_nb(nb) container_of(nb, struct exynos_cpuclk, clk_nb)
> > +
> > +/**
> > + * struct exynos_cpuclk_soc_data: soc specific data for cpu clocks.
> > + * @ops: clock operations to be used for this clock.
> > + * @offset: optional offset from base of clock controller register base, to
> > + * be used when accessing clock controller registers related to the
> > + * CPU clock.
> > + * @data: SoC specific data for cpuclk configuration (optional).
> > + * @data_size: size of the data contained in @data member.
> > + * @type: type of the CPU clock.
> > + * @pre_rate_cb: callback function to handle PRE_RATE_CHANGE notification
> > + * of the primary parent clock.
> > + * @post_rate_cb: callback function to handle POST_RATE_CHANGE notification
> > + * of the primary parent clock.
> > + *
> > + * This structure provides SoC specific data for CPU clocks. Based on
> > + * the compatible value of the clock controller node, the value of the
> > + * fields in this structure can be populated.
> > + */
> > +struct exynos_cpuclk_soc_data {
> > + const struct clk_ops *ops;
> > + unsigned int offset;
> > + const void *data;
> > + const unsigned int data_size;
> > + enum cpuclk_type type;
> > + int (*pre_rate_cb)(struct clk_notifier_data *,
> > + struct exynos_cpuclk *,
> > + void __iomem *base);
> > + int (*post_rate_cb)(struct clk_notifier_data *,
> > + struct exynos_cpuclk *,
> > + void __iomem *base);
> > +};
> > +
> > +/*
> > + * Helper function to wait until divider(s) have stabilized after the divider
> > + * value has changed.
> > + */
> > +static void wait_until_divider_stable(void __iomem *div_reg, unsigned long mask)
> > +{
> > + unsigned long timeout = jiffies + msecs_to_jiffies(10);
> > +
> > + while (time_before(jiffies, timeout))
> > + if (!(readl(div_reg) & mask))
> > + break;
> I think do while is more appropriate here. I think usually the divider
> status will be be mostly clear and then time_before is never called.
> > +
> > + if (readl(div_reg) & mask)
> > + pr_err("%s: timeout in divider stablization\n", __func__);
> If succes then return earlier. This readl call can be avoided.
> readl_relaxed is faster than readl. I don't have the numbers but check
> if all readl/writel can be replaced with the relaxed version. Since
> with cpufreq driver these clock calls will be very frequent so this
> optimization makes sense.
> > +}
> > +
> > +/*
> > + * Helper function to wait until mux has stabilized after the mux selection
> > + * value was changed.
> > + */
> > +static void wait_until_mux_stable(void __iomem *mux_reg, u32 mux_pos,
> > + unsigned long mux_value)
> > +{
> > + unsigned long timeout = jiffies + msecs_to_jiffies(10);
> > +
> > + while (time_before(jiffies, timeout))
> > + if (((readl(mux_reg) >> mux_pos) & MUX_MASK) == mux_value)
> > + break;
> > +
> > + if (((readl(mux_reg) >> mux_pos) & MUX_MASK) != mux_value)
> > + pr_err("%s: re-parenting mux timed-out\n", __func__);
> Same as above.
> > +}
> > +
> > +/* common round rate callback useable for all types of CPU clocks */
> > +static long exynos_cpuclk_round_rate(struct clk_hw *hw,
> > + unsigned long drate, unsigned long *prate)
> > +{
> > + struct clk *parent = __clk_get_parent(hw->clk);
> > + *prate = __clk_round_rate(parent, drate);
> > + return *prate;
> > +}
> > +
> > +/* common recalc rate callback useable for all types of CPU clocks */
> > +static unsigned long exynos_cpuclk_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + return parent_rate;
> > +}
> > +
> > +static const struct clk_ops exynos_cpuclk_clk_ops = {
> > + .recalc_rate = exynos_cpuclk_recalc_rate,
> > + .round_rate = exynos_cpuclk_round_rate,
> > +};
> > +
> > +/*
> > + * Calculates the divider value to be set for deriving drate from prate.
> > + * Divider value is actual divider value - 1.
> > + */
> > +static unsigned long _calc_div(unsigned long prate, unsigned long drate)
> > +{
> > + unsigned long div = DIV_ROUND_UP(prate, drate) - 1;
> > +
> > + WARN_ON(div >= MAX_DIV);
> > + return div;
> > +}
> > +
> > +/*
> > + * This notifier function is called for the pre-rate and post-rate change
> > + * notifications of the parent clock of cpuclk.
> > + */
> > +static int exynos_cpuclk_notifier_cb(struct notifier_block *nb,
> > + unsigned long event, void *data)
> > +{
> > + struct clk_notifier_data *ndata = data;
> > + struct exynos_cpuclk *cpuclk = to_exynos_cpuclk_nb(nb);
> > + void __iomem *base = cpuclk->ctrl_base + cpuclk->offset;
> > + int err = 0;
> > +
> > + if (event == PRE_RATE_CHANGE)
> > + err = cpuclk->pre_rate_cb(ndata, cpuclk, base);
> > + else if (event == POST_RATE_CHANGE)
> > + err = cpuclk->post_rate_cb(ndata, cpuclk, base);
> > +
> > + return notifier_from_errno(err);
> > +}
> > +
> > +/* helper function to register a cpu clock */
> > +static int __init exynos_cpuclk_register(struct samsung_clk_provider *ctx,
> > + unsigned int lookup_id, const char *name, const char *parent,
> > + const char *alt_parent, struct device_node *np,
> > + const struct exynos_cpuclk_soc_data *soc_data)
> > +{
> > + struct exynos_cpuclk *cpuclk;
> > + struct clk_init_data init;
> > + struct clk *clk;
> > + void *data;
> > + int ret = 0;
> > +
> > + cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
> > + if (!cpuclk)
> > + return -ENOMEM;
> > +
> > + data = kmalloc(soc_data->data_size, GFP_KERNEL);
> > + if (!data) {
> > + ret = -ENOMEM;
> > + goto free_cpuclk;
> > + }
> > +
> > + init.name = name;
> > + init.flags = CLK_SET_RATE_PARENT;
> > + init.parent_names = &parent;
> > + init.num_parents = 1;
> ?? number of parents are 2 with parent and alt-parent. Ignore this
> comment if trivial.
> > + init.ops = soc_data->ops;
> > +
> > + cpuclk->hw.init = &init;
> > + cpuclk->ctrl_base = ctx->reg_base;
> > + cpuclk->lock = &ctx->lock;
> > + cpuclk->offset = soc_data->offset;
> > + cpuclk->type = soc_data->type;
> > + cpuclk->pre_rate_cb = soc_data->pre_rate_cb;
> > + cpuclk->post_rate_cb = soc_data->post_rate_cb;
> > + memcpy(data, soc_data->data, soc_data->data_size);
> > + cpuclk->data = data;
> > +
> > + cpuclk->clk_nb.notifier_call = exynos_cpuclk_notifier_cb;
> > + ret = clk_notifier_register(__clk_lookup(parent), &cpuclk->clk_nb);
> > + if (ret) {
> > + pr_err("%s: failed to register clock notifier for %s\n",
> > + __func__, name);
> > + goto free_cpuclk_data;
> > + }
> > +
> > + cpuclk->alt_parent = __clk_lookup(alt_parent);
> > + if (!cpuclk->alt_parent) {
> > + pr_err("%s: could not lookup alternate parent %s\n",
> > + __func__, alt_parent);
> > + ret = -EINVAL;
> > + goto unregister_clk_nb;
> > + }
> > +
> > + clk = clk_register(NULL, &cpuclk->hw);
> > + if (IS_ERR(clk)) {
> > + pr_err("%s: could not register cpuclk %s\n", __func__, name);
> > + ret = PTR_ERR(clk);
> > + goto unregister_clk_nb;
> > + }
> > +
> > + samsung_clk_add_lookup(ctx, clk, lookup_id);
> This function is just updating the look up id in one line. Can this
> function call be totally removed or made inline?
> > + return 0;
> > +
> > +unregister_clk_nb:
> > + clk_notifier_unregister(__clk_lookup(parent), &cpuclk->clk_nb);
> > +free_cpuclk_data:
> > + kfree(cpuclk->data);
> > +free_cpuclk:
> > + kfree(cpuclk);
> > + return ret;
> > +}
> > +
> > +/*
> > + * Helper function to set the 'safe' dividers for the CPU clock. The parameters
> > + * div and mask contain the divider value and the register bit mask of the
> > + * dividers to be programmed.
> > + */
> > +static void exynos4210_set_safe_div(void __iomem *base, unsigned long div,
> > + unsigned long mask)
> > +{
> Same comment as above. If renaming this to exynos_set_safe_div makes any sense.
> > + unsigned long div0;
> > +
> > + div0 = readl(base + E4210_DIV_CPU0);
> > + div0 = (div0 & ~mask) | div;
> > + writel(div0, base + E4210_DIV_CPU0);
> > + wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, mask);
> > +}
> > +
> > +/* handler for pre-rate change notification from parent clock */
> > +static int exynos4210_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
> > + struct exynos_cpuclk *cpuclk, void __iomem *base)
> > +{
> > + const struct exynos4210_cpuclk_data *cpuclk_data = cpuclk->data;
> > + unsigned long alt_prate = clk_get_rate(cpuclk->alt_parent);
> Will this alt_prate ever change and hence can be cached?
> > + unsigned long alt_div = 0, alt_div_mask = DIV_MASK;
> > + unsigned long div0, div1 = 0, mux_reg;
> > + unsigned long flags;
> > +
> > + /* find out the divider values to use for clock data */
> > + while ((cpuclk_data->prate * 1000) != ndata->new_rate) {
> > + if (cpuclk_data->prate == 0)
> > + return -EINVAL;
> > + cpuclk_data++;
> Just thinking if these linear searches can be converted to binary search.
> > + }
> > +
> > + /* For the selected PLL clock frequency, get the pre-defined divider
> > + * values. If the clock for sclk_hpm is not sourced from apll, then
> > + * the values for DIV_COPY and DIV_HPM dividers need not be set.
> > + */
> > + div0 = cpuclk_data->div0;
> > + if (cpuclk->type != EXYNOS5420) {
> > + div1 = cpuclk_data->div1;
> > + if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK) {
> > + div1 = readl(base + E4210_DIV_CPU1) &
> > + E4210_DIV1_HPM_MASK;
> > + div1 |= ((cpuclk_data->div1) & ~E4210_DIV1_HPM_MASK);
> > + }
> > + }
> > +
> > + spin_lock_irqsave(cpuclk->lock, flags);
> I think this spin_lock_irqsave can be moved slightly up as some
> registers are accessed.
> > +
> > + /*
> > + * If the new and old parent clock speed is less than the clock speed
> > + * of the alternate parent, then it should be ensured that at no point
> > + * the armclk speed is more than the old_prate until the dividers are
> > + * set.
> > + */
> > + if (alt_prate > ndata->old_rate) {
> > + alt_div = _calc_div(alt_prate, ndata->old_rate);
> > + if (cpuclk->type == EXYNOS4210) {
> > + /*
> > + * In Exynos4210, ATB clock parent is also mout_core. So
> > + * ATB clock also needs to be mantained at safe speed.
> > + */
> > + alt_div |= E4210_DIV0_ATB_MASK;
> > + alt_div_mask |= E4210_DIV0_ATB_MASK;
> > + }
> > + exynos4210_set_safe_div(base, alt_div, alt_div_mask);
> > + div0 |= alt_div;
> > + }
> > +
> > + /* select sclk_mpll as the alternate parent */
> > + mux_reg = readl(base + E4210_SRC_CPU);
> > + writel(mux_reg | (1 << 16), base + E4210_SRC_CPU);
> > + wait_until_mux_stable(base + E4210_STAT_CPU, 16, 2);
> > +
> > + /* alternate parent is active now. set the dividers */
> > + writel(div0, base + E4210_DIV_CPU0);
> > + wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL);
> > +
> > + if (cpuclk->type != EXYNOS5420) {
> > + writel(div1, base + E4210_DIV_CPU1);
> > + wait_until_divider_stable(base + E4210_DIV_STAT_CPU1,
> > + DIV_MASK_ALL);
> > + }
> > +
> > + spin_unlock_irqrestore(cpuclk->lock, flags);
> > + return 0;
> > +}
> > +
> > +/* handler for post-rate change notification from parent clock */
> > +static int exynos4210_cpuclk_post_rate_change(struct clk_notifier_data *ndata,
> > + struct exynos_cpuclk *cpuclk, void __iomem *base)
> > +{
> > + const struct exynos4210_cpuclk_data *cpuclk_data = cpuclk->data;
> > + unsigned long div = 0, div_mask = DIV_MASK;
> > + unsigned long mux_reg, flags;
> > +
> > + spin_lock_irqsave(cpuclk->lock, flags);
> > +
> > + /* select mout_apll as the alternate parent */
> > + mux_reg = readl(base + E4210_SRC_CPU);
> > + writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU);
> > + wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1);
> > +
> > + if (cpuclk->type == EXYNOS4210) {
> > + /* find out the divider values to use for clock data */
> > + while ((cpuclk_data->prate * 1000) != ndata->new_rate) {
> > + if (cpuclk_data->prate == 0)
> > + return -EINVAL;
> spin_unlock_irqrestore not called here.
> > + cpuclk_data++;
> Also can this cpuclk_data be cached in pre rate call.
> > + }
> > +
> > + div |= (cpuclk_data->div0 & E4210_DIV0_ATB_MASK);
> > + div_mask |= E4210_DIV0_ATB_MASK;
> > + }
> > +
> > + exynos4210_set_safe_div(base, div, div_mask);
> > + spin_unlock_irqrestore(cpuclk->lock, flags);
> > + return 0;
> > +}
> > +
> > +static const struct exynos4210_cpuclk_data e4210_armclk_d[] __initconst = {
> > + { 1200000, E4210_CPU_DIV0(7, 1, 4, 3, 7, 3), E4210_CPU_DIV1(0, 5), },
> > + { 1000000, E4210_CPU_DIV0(7, 1, 4, 3, 7, 3), E4210_CPU_DIV1(0, 4), },
> > + { 800000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
> > + { 500000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
> > + { 400000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
> > + { 200000, E4210_CPU_DIV0(0, 1, 1, 1, 3, 1), E4210_CPU_DIV1(0, 3), },
> > + { 0 },
> > +};
> > +
> > +static const struct exynos4210_cpuclk_data e5250_armclk_d[] __initconst = {
> > + { 1700000, E5250_CPU_DIV0(5, 3, 7, 7, 7, 3), E5250_CPU_DIV1(2, 0), },
> > + { 1600000, E5250_CPU_DIV0(4, 1, 7, 7, 7, 3), E5250_CPU_DIV1(2, 0), },
> > + { 1500000, E5250_CPU_DIV0(4, 1, 7, 7, 7, 2), E5250_CPU_DIV1(2, 0), },
> > + { 1400000, E5250_CPU_DIV0(4, 1, 6, 7, 7, 2), E5250_CPU_DIV1(2, 0), },
> > + { 1300000, E5250_CPU_DIV0(3, 1, 6, 7, 7, 2), E5250_CPU_DIV1(2, 0), },
> > + { 1200000, E5250_CPU_DIV0(3, 1, 5, 7, 7, 2), E5250_CPU_DIV1(2, 0), },
> > + { 1100000, E5250_CPU_DIV0(3, 1, 5, 7, 7, 3), E5250_CPU_DIV1(2, 0), },
> > + { 1000000, E5250_CPU_DIV0(2, 1, 4, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 900000, E5250_CPU_DIV0(2, 1, 4, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 800000, E5250_CPU_DIV0(2, 1, 4, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 700000, E5250_CPU_DIV0(1, 1, 3, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 600000, E5250_CPU_DIV0(1, 1, 3, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 500000, E5250_CPU_DIV0(1, 1, 2, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 400000, E5250_CPU_DIV0(1, 1, 2, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 300000, E5250_CPU_DIV0(1, 1, 1, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 200000, E5250_CPU_DIV0(1, 1, 1, 7, 7, 1), E5250_CPU_DIV1(2, 0), },
> > + { 0 },
> > +};
> > +
> > +static const struct exynos4210_cpuclk_data e5420_eglclk_d[] __initconst = {
> > + { 1800000, E5420_EGL_DIV0(3, 7, 7, 4), },
> > + { 1700000, E5420_EGL_DIV0(3, 7, 7, 3), },
> > + { 1600000, E5420_EGL_DIV0(3, 7, 7, 3), },
> > + { 1500000, E5420_EGL_DIV0(3, 7, 7, 3), },
> > + { 1400000, E5420_EGL_DIV0(3, 7, 7, 3), },
> > + { 1300000, E5420_EGL_DIV0(3, 7, 7, 2), },
> > + { 1200000, E5420_EGL_DIV0(3, 7, 7, 2), },
> > + { 1100000, E5420_EGL_DIV0(3, 7, 7, 2), },
> > + { 1000000, E5420_EGL_DIV0(3, 6, 6, 2), },
> > + { 900000, E5420_EGL_DIV0(3, 6, 6, 2), },
> > + { 800000, E5420_EGL_DIV0(3, 5, 5, 2), },
> > + { 700000, E5420_EGL_DIV0(3, 5, 5, 2), },
> > + { 600000, E5420_EGL_DIV0(3, 4, 4, 2), },
> > + { 500000, E5420_EGL_DIV0(3, 3, 3, 2), },
> > + { 400000, E5420_EGL_DIV0(3, 3, 3, 2), },
> > + { 300000, E5420_EGL_DIV0(3, 3, 3, 2), },
> > + { 200000, E5420_EGL_DIV0(3, 3, 3, 2), },
> > + { 0 },
> > +};
> > +
> > +static const struct exynos4210_cpuclk_data e5420_kfcclk_d[] __initconst = {
> > + { 1300000, E5420_KFC_DIV(3, 5, 2), },
> > + { 1200000, E5420_KFC_DIV(3, 5, 2), },
> > + { 1100000, E5420_KFC_DIV(3, 5, 2), },
> > + { 1000000, E5420_KFC_DIV(3, 5, 2), },
> > + { 900000, E5420_KFC_DIV(3, 5, 2), },
> > + { 800000, E5420_KFC_DIV(3, 5, 2), },
> > + { 700000, E5420_KFC_DIV(3, 4, 2), },
> > + { 600000, E5420_KFC_DIV(3, 4, 2), },
> > + { 500000, E5420_KFC_DIV(3, 4, 2), },
> > + { 400000, E5420_KFC_DIV(3, 3, 2), },
> > + { 300000, E5420_KFC_DIV(3, 3, 2), },
> > + { 200000, E5420_KFC_DIV(3, 3, 2), },
> > + { 0 },
> > +};
> > +
> > +static const struct exynos_cpuclk_soc_data e4210_clk_soc_data __initconst = {
> > + .ops = &exynos_cpuclk_clk_ops,
> > + .offset = 0x14200,
> > + .data = e4210_armclk_d,
> > + .data_size = sizeof(e4210_armclk_d),
> > + .type = EXYNOS4210,
> > + .pre_rate_cb = exynos4210_cpuclk_pre_rate_change,
> > + .post_rate_cb = exynos4210_cpuclk_post_rate_change,
> > +};
> > +
> > +static const struct exynos_cpuclk_soc_data e5250_clk_soc_data __initconst = {
> > + .ops = &exynos_cpuclk_clk_ops,
> > + .offset = 0x200,
> > + .data = e5250_armclk_d,
> > + .data_size = sizeof(e5250_armclk_d),
> > + .type = EXYNOS5250,
> > + .pre_rate_cb = exynos4210_cpuclk_pre_rate_change,
> > + .post_rate_cb = exynos4210_cpuclk_post_rate_change,
> > +};
> > +
> > +static const struct exynos_cpuclk_soc_data e5420_clk_soc_data[] __initconst = {
> > + {
> > + /* Cluster 0 (A15) CPU clock data */
> > + .ops = &exynos_cpuclk_clk_ops,
> > + .offset = 0x200,
> > + .data = e5420_eglclk_d,
> > + .data_size = sizeof(e5420_eglclk_d),
> > + .type = EXYNOS5420,
> > + .pre_rate_cb = exynos4210_cpuclk_pre_rate_change,
> > + .post_rate_cb = exynos4210_cpuclk_post_rate_change,
> > + }, {
> > + /* Cluster 1 (A7) CPU clock data */
> > + .ops = &exynos_cpuclk_clk_ops,
> > + .offset = 0x28200,
> > + .data = e5420_kfcclk_d,
> > + .data_size = sizeof(e5420_kfcclk_d),
> > + .type = EXYNOS5420,
> > + .pre_rate_cb = exynos4210_cpuclk_pre_rate_change,
> > + .post_rate_cb = exynos4210_cpuclk_post_rate_change,
> > + },
> > +};
> > +
> > +static const struct of_device_id exynos_cpuclk_ids[] __initconst = {
> > + { .compatible = "samsung,exynos4210-clock",
> > + .data = &e4210_clk_soc_data, },
> > + { .compatible = "samsung,exynos5250-clock",
> > + .data = &e5250_clk_soc_data, },
> > + { .compatible = "samsung,exynos5420-clock",
> > + .data = &e5420_clk_soc_data, },
> > + { },
> > +};
> > +
> > +/**
> > + * exynos_register_cpu_clock: register cpu clock with ccf.
> > + * @ctx: driver context.
> > + * @cluster_id: cpu cluster number to which this clock is connected.
> > + * @lookup_id: cpuclk clock output id for the clock controller.
> > + * @name: the name of the cpu clock.
> > + * @parent: name of the parent clock for cpuclk.
> > + * @alt_parent: name of the alternate clock parent.
> > + * @np: device tree node pointer of the clock controller.
> > + */
> > +int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
> > + unsigned int cluster_id, unsigned int lookup_id,
> > + const char *name, const char *parent,
> > + const char *alt_parent, struct device_node *np)
> > +{
> > + const struct of_device_id *match;
> > + const struct exynos_cpuclk_soc_data *data = NULL;
> > +
> > + if (!np)
> > + return -EINVAL;
> > +
> > + match = of_match_node(exynos_cpuclk_ids, np);
> > + if (!match)
> > + return -EINVAL;
> > +
> > + data = match->data;
> > + data += cluster_id;
> > + return exynos_cpuclk_register(ctx, lookup_id, name, parent,
> > + alt_parent, np, data);
> > +}
> > diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
> > index 9693b80..bdeca1d 100644
> > --- a/drivers/clk/samsung/clk.h
> > +++ b/drivers/clk/samsung/clk.h
> > @@ -372,4 +372,9 @@ extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
> > const unsigned long *rdump,
> > unsigned long nr_rdump);
> >
> > +extern int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
> > + unsigned int cluster_id, unsigned int lookup_id,
> > + const char *name, const char *parent,
> > + const char *alt_parent, struct device_node *np);
> > +
> > #endif /* __SAMSUNG_CLK_H */
> > --
> > 1.7.9.5
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
I have tested this series on Exynos5420 based peach pit chromebook.
And I can see CPUFREQ working with userspace, ondemand and performance governors
after adding the clock-latency field for all the CPU nodes.
Also, please add support for Exynos 5800 based Peach pi board as well.
After updating the above please add.
Tested-by: Arjun.K.V <arjun.kv@xxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
