From: Thomas Abraham <thomas.ab@xxxxxxxxxxx> Exynos4210 and Exynos5250 based platforms have switched over to use generic cpufreq drivers for cpufreq functionality. So the Exynos specific cpufreq drivers for these platforms can be removed. Cc: Viresh Kumar <viresh.kumar@xxxxxxxxxx> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx> --- drivers/cpufreq/Kconfig.arm | 22 ---- drivers/cpufreq/Makefile | 2 - drivers/cpufreq/exynos4210-cpufreq.c | 184 ----------------------------- drivers/cpufreq/exynos5250-cpufreq.c | 210 ---------------------------------- 4 files changed, 418 deletions(-) delete mode 100644 drivers/cpufreq/exynos4210-cpufreq.c delete mode 100644 drivers/cpufreq/exynos5250-cpufreq.c diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index ebac671..7a2f289 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -28,17 +28,6 @@ config ARM_VEXPRESS_SPC_CPUFREQ config ARM_EXYNOS_CPUFREQ bool -config ARM_EXYNOS4210_CPUFREQ - bool "SAMSUNG EXYNOS4210" - depends on CPU_EXYNOS4210 - default y - select ARM_EXYNOS_CPUFREQ - help - This adds the CPUFreq driver for Samsung EXYNOS4210 - SoC (S5PV310 or S5PC210). - - If in doubt, say N. - config ARM_EXYNOS4X12_CPUFREQ bool "SAMSUNG EXYNOS4x12" depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 @@ -50,17 +39,6 @@ config ARM_EXYNOS4X12_CPUFREQ If in doubt, say N. -config ARM_EXYNOS5250_CPUFREQ - bool "SAMSUNG EXYNOS5250" - depends on SOC_EXYNOS5250 - default y - select ARM_EXYNOS_CPUFREQ - help - This adds the CPUFreq driver for Samsung EXYNOS5250 - SoC. - - If in doubt, say N. - config ARM_EXYNOS5440_CPUFREQ bool "SAMSUNG EXYNOS5440" depends on SOC_EXYNOS5440 diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 738c8b7..ca5fb2d 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -52,9 +52,7 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c deleted file mode 100644 index 61a5431..0000000 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4210 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; -static struct exynos_dvfs_info *cpufreq; - -static unsigned int exynos4210_volt_table[] = { - 1250000, 1150000, 1050000, 975000, 950000, -}; - -static struct cpufreq_frequency_table exynos4210_freq_table[] = { - {0, L0, 1200 * 1000}, - {0, L1, 1000 * 1000}, - {0, L2, 800 * 1000}, - {0, L3, 500 * 1000}, - {0, L4, 200 * 1000}, - {0, 0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq apll_freq_4210[] = { - /* - * values: - * freq - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1), - APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1), - APLL_FREQ(800, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1), - APLL_FREQ(500, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2), - APLL_FREQ(200, 0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3), -}; - -static void exynos4210_set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_4210[div_index].clk_div_cpu0; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU); - - do { - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU); - } while (tmp & 0x1111111); - - /* Change Divider - CPU1 */ - - tmp = apll_freq_4210[div_index].clk_div_cpu1; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1); - - do { - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1); - } while (tmp & 0x11); -} - -static void exynos4210_set_apll(unsigned int index) -{ - unsigned int tmp, freq = apll_freq_4210[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU) - >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU); - tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); -} - -static void exynos4210_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - exynos4210_set_clkdiv(new_index); - exynos4210_set_apll(new_index); - } else if (old_index < new_index) { - exynos4210_set_apll(new_index); - exynos4210_set_clkdiv(new_index); - } -} - -int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) -{ - struct device_node *np; - unsigned long rate; - - /* - * HACK: This is a temporary workaround to get access to clock - * controller registers directly and remove static mappings and - * dependencies on platform headers. It is necessary to enable - * Exynos multi-platform support and will be removed together with - * this whole driver as soon as Exynos gets migrated to use - * cpufreq-cpu0 driver. - */ - np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock"); - if (!np) { - pr_err("%s: failed to find clock controller DT node\n", - __func__); - return -ENODEV; - } - - info->cmu_regs = of_iomap(np, 0); - if (!info->cmu_regs) { - pr_err("%s: failed to map CMU registers\n", __func__); - return -EFAULT; - } - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "moutcore"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L2; - info->cpu_clk = cpu_clk; - info->volt_table = exynos4210_volt_table; - info->freq_table = exynos4210_freq_table; - info->set_freq = exynos4210_set_frequency; - - cpufreq = info; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_debug("%s: failed initialization\n", __func__); - return -EINVAL; -} diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c deleted file mode 100644 index c91ce69..0000000 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright (c) 2010-20122Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS5250 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; -static struct exynos_dvfs_info *cpufreq; - -static unsigned int exynos5250_volt_table[] = { - 1300000, 1250000, 1225000, 1200000, 1150000, - 1125000, 1100000, 1075000, 1050000, 1025000, - 1012500, 1000000, 975000, 950000, 937500, - 925000 -}; - -static struct cpufreq_frequency_table exynos5250_freq_table[] = { - {0, L0, 1700 * 1000}, - {0, L1, 1600 * 1000}, - {0, L2, 1500 * 1000}, - {0, L3, 1400 * 1000}, - {0, L4, 1300 * 1000}, - {0, L5, 1200 * 1000}, - {0, L6, 1100 * 1000}, - {0, L7, 1000 * 1000}, - {0, L8, 900 * 1000}, - {0, L9, 800 * 1000}, - {0, L10, 700 * 1000}, - {0, L11, 600 * 1000}, - {0, L12, 500 * 1000}, - {0, L13, 400 * 1000}, - {0, L14, 300 * 1000}, - {0, L15, 200 * 1000}, - {0, 0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq apll_freq_5250[] = { - /* - * values: - * freq - * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0), - APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0), - APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0), - APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0), - APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0), - APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0), - APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0), - APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0), - APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0), - APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1), - APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1), - APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1), - APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1), - APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2), - APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2), -}; - -static void set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_5250[div_index].clk_div_cpu0; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0); - - while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0) - & 0x11111111) - cpu_relax(); - - /* Change Divider - CPU1 */ - tmp = apll_freq_5250[div_index].clk_div_cpu1; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1); - - while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11) - cpu_relax(); -} - -static void set_apll(unsigned int index) -{ - unsigned int tmp; - unsigned int freq = apll_freq_5250[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - cpu_relax(); - tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU) - >> 16); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - cpu_relax(); - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU); - tmp &= (0x7 << 16); - } while (tmp != (0x1 << 16)); -} - -static void exynos5250_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - set_clkdiv(new_index); - set_apll(new_index); - } else if (old_index < new_index) { - set_apll(new_index); - set_clkdiv(new_index); - } -} - -int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) -{ - struct device_node *np; - unsigned long rate; - - /* - * HACK: This is a temporary workaround to get access to clock - * controller registers directly and remove static mappings and - * dependencies on platform headers. It is necessary to enable - * Exynos multi-platform support and will be removed together with - * this whole driver as soon as Exynos gets migrated to use - * cpufreq-cpu0 driver. - */ - np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock"); - if (!np) { - pr_err("%s: failed to find clock controller DT node\n", - __func__); - return -ENODEV; - } - - info->cmu_regs = of_iomap(np, 0); - if (!info->cmu_regs) { - pr_err("%s: failed to map CMU registers\n", __func__); - return -EFAULT; - } - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "mout_cpu"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L9; - info->cpu_clk = cpu_clk; - info->volt_table = exynos5250_volt_table; - info->freq_table = exynos5250_freq_table; - info->set_freq = exynos5250_set_frequency; - - cpufreq = info; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_err("%s: failed initialization\n", __func__); - return -EINVAL; -} -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
