Re: [PATCH v4 0/8] cpufreq: use cpufreq-cpu0 driver for exynos based platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thomas,

In general the design already looks good, but I commented on several
implementation issues I found in particular patches (and some minor
nitpicks while at it).

Please let me know whether you have time to work on addressing them.
Otherwise we can just let me, Lukasz or someone else address remaining
issues.

Best regards,
Tomasz

On 14.05.2014 03:11, Thomas Abraham wrote:
> Changes since v3:
> - Addressed comments from Tomasz Figa <t.figa@xxxxxxxxxxx>
>   [http://www.spinics.net/lists/cpufreq/msg09290.html]
> - Rebased to v3.15-rc4
> 
> Changes since v2:
> - Safe operating voltage is not required while switching APLL frequency
>   since the temporary parent's clock is divided down to keep armclk within
>   permissible limits. Thanks to Heiko Stübner <heiko@xxxxxxxxx> for this
>   suggesting this.
> - Rob had suggested to use max frequency for each of the divider clock
>   outputs instead of divider values. But due to certain SoC specific
>   characteristics, the divider values corresponding to the input clock
>   frequency for the CMU_CPU clock blocks have to be used.
> 
> Changes since v1:
> - Removes Exynos4x12 and Exynos5250 cpufreq driver also.
> - Device tree based clock configuration lookup as suggested by Lukasz
>   Majewski and Tomasz Figa.
> - safe operating point binding reworked as suggested by Shawn Guo.
> 
> The patch series removes the use of Exynos specific cpufreq driver and enables
> the use of cpufreq-cpu0 driver for Exynos4210, Exynos4x12 and Exynos5250 based
> platforms. This is being done for few reasons.
> 
> (a) The Exynos cpufreq driver reads/writes clock controller registers
>     bypassing the Exynos CCF driver which is sort of problematic.
> (b) Removes the need for having clock controller register definitions
>     in the cpufreq driver and also removes the need for statically
>     io-remapping clock controller address space (helps in moving towards
>     multiplatform kernel).
> 
> Thomas Abraham (8):
>   cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies
>   clk: samsung: change scope of samsung clock lock to global
>   clk: samsung: add infrastructure to register cpu clocks
>   Documentation: devicetree: add cpu clock configuration data binding for Exynos4/5
>   clk: exynos: use cpu-clock provider type to represent arm clock
>   ARM: dts: Exynos: add cpu nodes, opp and cpu clock configuration data
>   ARM: Exynos: switch to using generic cpufreq-cpu0 driver
>   cpufreq: exynos: remove all exynos specific cpufreq driver support
> 
> 
>  .../devicetree/bindings/clock/exynos4-clock.txt    |   37 ++
>  .../devicetree/bindings/clock/exynos5250-clock.txt |   36 ++
>  .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt   |    2 +
>  arch/arm/boot/dts/exynos4210-origen.dts            |    6 +
>  arch/arm/boot/dts/exynos4210-trats.dts             |    6 +
>  arch/arm/boot/dts/exynos4210-universal_c210.dts    |    6 +
>  arch/arm/boot/dts/exynos4210.dtsi                  |   35 ++
>  arch/arm/boot/dts/exynos4212.dtsi                  |   18 +
>  arch/arm/boot/dts/exynos4412-odroidx.dts           |    6 +
>  arch/arm/boot/dts/exynos4412-origen.dts            |    6 +
>  arch/arm/boot/dts/exynos4412-trats2.dts            |    6 +
>  arch/arm/boot/dts/exynos4412.dtsi                  |   31 ++
>  arch/arm/boot/dts/exynos4x12.dtsi                  |   36 ++
>  arch/arm/boot/dts/exynos5250-arndale.dts           |    6 +
>  arch/arm/boot/dts/exynos5250-cros-common.dtsi      |    6 +
>  arch/arm/boot/dts/exynos5250-smdk5250.dts          |    6 +
>  arch/arm/boot/dts/exynos5250.dtsi                  |   41 ++
>  arch/arm/mach-exynos/exynos.c                      |    4 +-
>  drivers/clk/samsung/Makefile                       |    2 +-
>  drivers/clk/samsung/clk-cpu.c                      |  458 ++++++++++++++++++++
>  drivers/clk/samsung/clk-exynos4.c                  |   25 +-
>  drivers/clk/samsung/clk-exynos5250.c               |   12 +-
>  drivers/clk/samsung/clk.c                          |   13 +-
>  drivers/clk/samsung/clk.h                          |    7 +
>  drivers/cpufreq/Kconfig                            |   11 +
>  drivers/cpufreq/Kconfig.arm                        |   52 ---
>  drivers/cpufreq/Makefile                           |    4 -
>  drivers/cpufreq/cpufreq-cpu0.c                     |    5 +
>  drivers/cpufreq/exynos-cpufreq.c                   |  209 ---------
>  drivers/cpufreq/exynos-cpufreq.h                   |   91 ----
>  drivers/cpufreq/exynos4210-cpufreq.c               |  157 -------
>  drivers/cpufreq/exynos4x12-cpufreq.c               |  211 ---------
>  drivers/cpufreq/exynos5250-cpufreq.c               |  183 --------
>  include/dt-bindings/clock/exynos5250.h             |    1 +
>  34 files changed, 799 insertions(+), 936 deletions(-)
>  create mode 100644 drivers/clk/samsung/clk-cpu.c
>  delete mode 100644 drivers/cpufreq/exynos-cpufreq.c
>  delete mode 100644 drivers/cpufreq/exynos-cpufreq.h
>  delete mode 100644 drivers/cpufreq/exynos4210-cpufreq.c
>  delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c
>  delete mode 100644 drivers/cpufreq/exynos5250-cpufreq.c
> 
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel Devel]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Forum]     [Linux SCSI]

  Powered by Linux