On 13-12-2013 12:38, Lukasz Majewski wrote:
> This patch provides auto disable/enable operation for boost. It uses already
> present thermal infrastructure to provide boost hysteresis.
> The TMU data has been modified to work properly with or without boost.
>
> Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> Signed-off-by: Myungjoo Ham <myungjoo.ham@xxxxxxxxxxx>
Acked-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
Looks better to me now. You might consider refactoring this driver to be
frequency independent, if possible. But that is a different subject
other than this patch.
>
> ---
> Changes for v11:
> - Use only one thermal data set
> - Adjust Exynos4412 thermal data to work with or without BOOST
>
> Changes for v10:
> - Remove boost related code from thermal_core.c
> - Use already present thermal infrastructure to provide thermal hysteresis
> - Introduce special set of TMU data for BOOST
>
> Changes for v9:
> - None
>
> Changes for v8:
> - Move cpufreq_boost_* stub functions definition (needed when cpufreq
> is not compiled in) to cpufreq.h at cpufreq core support commit
>
> Changes for v7:
> - None
>
> Changes for v6:
> - Disable boost only when supported and enabled
> - Protect boost related thermal_zone_device struct fields with mutex
> - Evaluate temperature trend during boost enable decision
> - Create separate methods to handle boost enable/disable
> (thermal_boost_{enable|disable}) operations
> - Boost is disabled at any trip point passage (not only the non critical one)
> - Add stub definitions for cpufreq boost functions used when
> CONFIG_CPU_FREQ is NOT defined.
>
> Changes for v5:
> - Move boost disable code from cpu_cooling.c to thermal_core.c
> (to handle_non_critical_trips)
> - Extent struct thermal_zone_device by adding overheated bool flag
> - Implement auto enable of boost after device cools down
> - Introduce boost_polling flag, which indicates if thermal uses it's predefined
> pool delay or has woken up thermal workqueue only to wait until device
> cools down.
>
> Changes for v4:
> - New patch
>
> drivers/thermal/samsung/exynos_tmu_data.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index 073c292..476b768 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -131,8 +131,8 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>
> #define EXYNOS4412_TMU_DATA \
> .threshold_falling = 10, \
> - .trigger_levels[0] = 85, \
> - .trigger_levels[1] = 103, \
> + .trigger_levels[0] = 70, \
> + .trigger_levels[1] = 95, \
> .trigger_levels[2] = 110, \
> .trigger_levels[3] = 120, \
> .trigger_enable[0] = true, \
> @@ -155,12 +155,12 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
> .second_point_trim = 85, \
> .default_temp_offset = 50, \
> .freq_tab[0] = { \
> - .freq_clip_max = 800 * 1000, \
> - .temp_level = 85, \
> + .freq_clip_max = 1400 * 1000, \
> + .temp_level = 70, \
> }, \
> .freq_tab[1] = { \
> - .freq_clip_max = 200 * 1000, \
> - .temp_level = 103, \
> + .freq_clip_max = 400 * 1000, \
> + .temp_level = 95, \
> }, \
> .freq_tab_count = 2, \
> .registers = &exynos4412_tmu_registers, \
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
Attachment:
signature.asc
Description: OpenPGP digital signature
