hi, answers are in between: Am Mittwoch 09 Dezember 2009 20:37:57 schrieben Sie: > Hi, > > On Wednesday 09 December 2009 06:20:06 pm Rüdiger Kramolisch wrote: > > hi, > > > > i am having issues with the intel q8400s and p8600 cpu. both dont do > > frequency scaling. > > The newer CPUs might be unknown to the BIOS? > Did you upgrade the CPUs? yes to both. q8400s is upgrade, the p8400 is for a new computer... (both self built) > Best try a BIOS update. If it still does not work check whether they > should be fully supported. q8400s: i did the bios update before the cpu update :) according to this page: http://processormatch.intel.com/CompDB/SearchResult.aspx?Boardname=DP35DP the cpu is compatible with my board. there is no newer bios than the one i have. http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+3+Series+Chipset+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+DP35DP http://imagebin.ca/view/oheuESY.html who would have thought it is working under windows :/ but it embezzles the SSE4 instruction set. http://imagebin.ca/view/ylUS9vC7.html p8600: the board i use for that cpu has a somewhat "new" bios. well the date shows 05/27/2009 but since it is a DFI board( CA 230-bf) and DFI not bothering having a proper support page.................... http://imagebin.ca/view/8jKkYR6.html it somewhat recognises the cpu. > You could check whether ACPI cpufreq functions are exposed by > following these instructions: > ftp://ftp.suse.com/pub/people/trenn/How_to_check_for_ACPI_BIOS_syntax_bugs. > txt and then do: > grep _PSS *.dsl > If this doesn't show anything, the CPU is not recognized by the BIOS > and BIOS does not export necessary functions to the OS. > dmesg/syslog after trying to load acpi-cpufreq should also point to a > firmware upgrade now IIRC. > > Thomas "grep _PSS *.dsl" doesnt show anything :( dmesg at the end of the mail. ~60k chars. i hope the limit is still set @100k ;D > > q8400s: > > linux-2.6.31.6 > > cpufreq-info > > cpufrequtils 005: cpufreq-info (C) Dominik Brodowski 2004-2006 > > Report errors and bugs to cpufreq@xxxxxxxxxxxxxxx, please. > > analyzing CPU 0: > > no or unknown cpufreq driver is active on this CPU > > analyzing CPU 1: > > no or unknown cpufreq driver is active on this CPU > > analyzing CPU 2: > > no or unknown cpufreq driver is active on this CPU > > analyzing CPU 3: > > no or unknown cpufreq driver is active on this CPU > > > > > > p8600: > > linux 2.6.32 > > cpufreq-info > > cpufrequtils 006: cpufreq-info (C) Dominik Brodowski 2004-2009 > > Report errors and bugs to cpufreq@xxxxxxxxxxxxxxx, please. > > analyzing CPU 0: > > no or unknown cpufreq driver is active on this CPU > > maximum transition latency: 4294.55 ms. > > analyzing CPU 1: > > no or unknown cpufreq driver is active on this CPU > > maximum transition latency: 4294.55 ms. > > > > the computer i have the q8400s in it, had a few hours ago a q6600.... > > frequency scaling worked with the q6600 without any problems. > > -- > To unsubscribe from this list: send the line "unsubscribe cpufreq" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > q8400s: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : 06/17 stepping : 10 cpu MHz : 2666.405 cache size : 2048 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni tm2 ssse3 lahf_lm bogomips : 5332.53 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: P8600: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping : 6 cpu MHz : 2394.136 cache size : 3072 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority bogomips : 4787.16 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: dmesg - q8400s: Registered protocol family 20 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff has been reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xe0000000-0xe2ffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x1000-0x1fff pci 0000:00:1c.1: MEM window: 0xe3100000-0xe31fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: disabled pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xe3000000-0xe30fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe2ffffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff] pci_bus 0000:03: resource 1 mem: [0xe3100000-0xe31fffff] pci_bus 0000:07: resource 1 mem: [0xe3000000-0xe30fffff] pci_bus 0000:07: resource 3 io: [0x00-0xffff] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 cpu0(4) debug files 149 cpu1(4) debug files 149 cpu2(4) debug files 149 cpu3(4) debug files 149 microcode: CPU0 sig=0x1067a, pf=0x10, revision=0x0 microcode: CPU1 sig=0x1067a, pf=0x10, revision=0x0 microcode: CPU2 sig=0x1067a, pf=0x10, revision=0x0 microcode: CPU3 sig=0x1067a, pf=0x10, revision=0x0 Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba audit: initializing netlink socket (disabled) type=2000 audit(1260395968.436:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) DLM (built Nov 14 2009 00:02:30) installed squashfs: version 4.0 (2009/01/31) Phillip Lougher NTFS driver 2.1.29 [Flags: R/W DEBUG]. fuse init (API version 7.12) OCFS2 1.5.0 ocfs2: Registered cluster interface o2cb ocfs2: Registered cluster interface user OCFS2 Node Manager 1.5.0 OCFS2 DLM 1.5.0 OCFS2 DLMFS 1.5.0 OCFS2 User DLM kernel interface loaded Slow work thread pool: Starting up Slow work thread pool: Ready GFS2 (built Nov 14 2009 00:03:00) installed msgmni has been set to 15840 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered (default) io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.4: setting latency timer to 64 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] Monitor-Mwait will be used to enter C-1 state processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU2] (supports 8 throttling states) processor LNXCPU:02: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) processor LNXCPU:03: registered as cooling_device3 ACPI: Processor [CPU3] (supports 8 throttling states) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Unable to find any System Interface(s) IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded nbd: registered device at major 43 input: Macintosh mouse button emulation as /devices/virtual/input/input2 Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0: no devices on the port ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1: no devices on the port ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ide-cd driver 5.00 Loading iSCSI transport class v2.0-870. SCSI Media Changer driver v0.25 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21 ata2: SATA max UDMA/133 abar m2048@0xe3225000 port 0xe3225180 irq 21 ata3: SATA max UDMA/133 irq_stat 0x00400040 irq 21, connection status changed ata4: SATA max UDMA/133 abar m2048@0xe3225000 port 0xe3225280 irq 21 ata5: SATA max UDMA/133 abar m2048@0xe3225000 port 0xe3225300 irq 21 ata6: SATA max UDMA/133 abar m2048@0xe3225000 port 0xe3225380 irq 21 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 Error: Driver 'pata_platform' is already registered, aborting... Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> HDLC support module revision 1.22 DLCI driver v0.35, 4 Jan 1997, mike.mclagan@xxxxxxxxxx usbcore: registered new interface driver catc catc: v2.8:CATC EL1210A NetMate USB Ethernet driver usbcore: registered new interface driver kaweth pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver usbcore: registered new interface driver rtl8150 hso: drivers/net/usb/hso.c: 1.2 Option Wireless ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al) orinoco_cs 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al) orinoco_plx 0.15 (Pavel Roskin <proski@xxxxxxx>, David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Daniel Barlow <dan@xxxxxxxxxx>) orinoco_pci 0.15 (Pavel Roskin <proski@xxxxxxx>, David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx> & Jean Tourrilhes <jt@xxxxxxxxxx>) orinoco_tmd 0.15 (Joerg Dorchain <joerg@xxxxxxxxxxxx>) orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@xxxxxxxxxxx>) spectrum_cs 0.15 (Pavel Roskin <proski@xxxxxxx>, David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, et al) airo(): Probing for PCI adapters airo(): Finished probing for PCI adapters Loaded prism54 driver, version 1.2 Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26k iwl3945: Copyright(c) 2003-2009 Intel Corporation usbcore: registered new interface driver rt2500usb usbcore: registered new interface driver rt73usb usbcore: registered new interface driver p54usb I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.10 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.10 Fusion MPT FC Host driver 3.04.10 Fusion MPT SAS Host driver 3.04.10 Fusion MPT misc device (ioctl) driver 3.04.10 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) ohci1394 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ... ... usb stuff removed ... PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! coretemp coretemp.2: Using relative temperature scale! coretemp coretemp.3: Using relative temperature scale! it87: Unsupported chip (DEVID=0xf191) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm- devel@xxxxxxxxxx device-mapper: multipath: version 1.1.0 loaded device-mapper: multipath round-robin: version 1.0.0 loaded Bluetooth: Virtual HCI driver ver 1.3 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: HCILL protocol initialized Bluetooth: Broadcom Blutonium firmware driver ver 1.2 usbcore: registered new interface driver bcm203x Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x Bluetooth: BlueFRITZ! USB driver ver 1.2 usbcore: registered new interface driver bfusb cpuidle: using governor ladder cpuidle: using governor menu dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.20. ALSA device list: No soundcards found. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. lec.c: Nov 14 2009 00:03:33 initialized mpc.c: Nov 14 2009 00:03:30 initialized 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx> All bugs added by David S. Miller <davem@xxxxxxxxxx> SCTP: Hash tables configured (established 65536 bind 65536) lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' lib80211_crypt: registered algorithm 'WEP' lib80211_crypt: registered algorithm 'CCMP' lib80211_crypt: registered algorithm 'TKIP' registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata5: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) usb 1-5: new high speed USB device using ehci_hcd and address 5 usb 1-5: New USB device found, idVendor=03f0, idProduct=2524 usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 4 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: STT_FTM28GX25H, 1819, max UDMA/133 ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA STT_FTM28GX25H 1819 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB02, max UDMA/33, ATAPI AN ata3.00: applying bridge limits sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk ata3.00: configured for UDMA/33 scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg1 type 5 EXT3-fs: sda5: couldn't mount because of unsupported optional features (240). EXT2-fs: sda5: couldn't mount because of unsupported optional features (240). EXT4-fs (sda5): barriers enabled kjournald2 starting: pid 1187, dev sda5:8, commit interval 5 seconds EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sda5): internal journal on sda5:8 EXT4-fs (sda5): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 515175 EXT4-fs (sda5): 1 orphan inode deleted EXT4-fs (sda5): recovery complete EXT4-fs (sda5): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) on device 8:5. Freeing unused kernel memory: 504k freed Write protecting the kernel read-only data: 11588k usb 3-2: New USB device found, idVendor=045e, idProduct=0038 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: SideWinder Precision 2 Joystick usb 3-2: Manufacturer: Microsoft usb 3-2: configuration #1 chosen from 1 choice input: Microsoft SideWinder Precision 2 Joystick as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3 generic-usb 0003:045E:0038.0001: input,hidraw0: USB HID v1.10 Joystick [Microsoft SideWinder Precision 2 Joystick] on usb-0000:00:1a.0-2/input0 usb 4-1: new low speed USB device using uhci_hcd and address 2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001e5e46a] udev: starting version 149 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidiafb: Device ID: 10de0193 nvidiafb: unknown NV_ARCH e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts. usb 4-1: New USB device found, idVendor=046d, idProduct=c01b usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: USB-PS/2 Optical Mouse usb 4-1: Manufacturer: Logitech usb 4-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4 generic-usb 0003:046D:C01B.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-1/input0 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:96:8e:f4 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: ffffff-0ff HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 4-2: new low speed USB device using uhci_hcd and address 3 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.42 Tue Oct 20 20:25:42 PDT 2009 input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 usb 4-2: New USB device found, idVendor=046a, idProduct=0001 usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 4-2: configuration #1 chosen from 1 choice input: HID 046a:0001 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input12 generic-usb 0003:046A:0001.0003: input,hidraw2: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:1a.1-2/input0 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 4 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa09eade0 vboxdrv: fAsync=0 offMin=0x490 offMax=0x5578 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.1.0 (interface 0x00100001). EXT4-fs (sda6): barriers enabled kjournald2 starting: pid 1715, dev sda6:8, commit interval 5 seconds EXT4-fs (sda6): internal journal on sda6:8 EXT4-fs (sda6): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda6): mounted filesystem with ordered data mode NTFS volume version 3.1. NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows. ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Adding 2449400k swap on /dev/sda7. Priority:-1 extents:1 across:2449400k SS p8600: dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.322amd64-muh76-acpi-neu (root@linuxkiste) (gcc version 4.3.4 (Debian 4.3.4-6) ) #10 SMP PREEMPT Tue Dec 8 08:07:06 CET 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.322amd64-muh76-acpi- neu root=/dev/sda1 ro acpi_osi=!Linux [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bc90000 (usable) [ 0.000000] BIOS-e820: 000000007bc90000 - 000000007bce3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bce3000 - 000000007bcf0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bcf0000 - 000000007be00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7bc90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 060000000 mask FF0000000 write-back [ 0.000000] 3 base 070000000 mask FF8000000 write-back [ 0.000000] 4 base 078000000 mask FFC000000 write-back [ 0.000000] 5 base 07BE00000 mask FFFE00000 uncachable [ 0.000000] 6 base 07C000000 mask FFC000000 uncachable [ 0.000000] 7 base 07BD00000 mask FFFF00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007bc90000 (usable) [ 0.000000] modified: 000000007bc90000 - 000000007bce3000 (ACPI NVS) [ 0.000000] modified: 000000007bce3000 - 000000007bcf0000 (ACPI data) [ 0.000000] modified: 000000007bcf0000 - 000000007be00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007bc90000 [ 0.000000] 0000000000 - 007bc00000 page 2M [ 0.000000] 007bc00000 - 007bc90000 page 4k [ 0.000000] kernel direct mapping tables up to 7bc90000 @ 10000-14000 [ 0.000000] ACPI: RSDP 00000000000f7d30 00024 (v02 IntelR) [ 0.000000] ACPI: XSDT 000000007bce3080 00044 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007bce9180 000F4 (v03 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007bce31c0 05F84 (v01 INTELR AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007bc90000 00040 [ 0.000000] ACPI: MCFG 000000007bce9340 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007bce9280 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 000000007bcea020 00A23 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007bc90000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001afce04] TEXT DATA BSS ==> [0001000000 - 0001afce04] [ 0.000000] #3 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #4 [0001afd000 - 0001afd0a6] BRK ==> [0001afd000 - 0001afd0a6] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f3940] f3940 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000- ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0007bc90 [ 0.000000] On node 0 totalpages: 506910 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6876 pages used for memmap [ 0.000000] DMA32 zone: 496052 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7be00000 (gap: 7be00000:64200000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001c00000 s89432 r8192 d21160 u524288 [ 0.000000] pcpu-alloc: s89432 r8192 d21160 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 499875 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.322amd64- muh76-acpi-neu root=/dev/sda1 ro acpi_osi=!Linux [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1983372k/2028096k available (5953k kernel code, 456k absent, 43608k reserved, 3573k data, 532k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2394.136 MHz processor. [ 0.002005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.27 BogoMIPS (lpj=2394136) [ 0.002199] Security Framework initialized [ 0.002290] SELinux: Initializing. [ 0.002384] SELinux: Starting in permissive mode [ 0.002391] Mount-cache hash table entries: 256 [ 0.003159] Initializing cgroup subsys ns [ 0.003249] Initializing cgroup subsys cpuacct [ 0.003338] Initializing cgroup subsys freezer [ 0.003443] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003550] CPU: L2 cache: 3072K [ 0.003638] CPU: Physical Processor ID: 0 [ 0.003724] CPU: Processor Core ID: 0 [ 0.003812] mce: CPU supports 6 MCE banks [ 0.003904] CPU0: Thermal monitoring enabled (TM2) [ 0.004004] using mwait in idle threads. [ 0.004091] Performance Events: Core2 events, Intel PMU driver. [ 0.004223] ... version: 2 [ 0.004310] ... bit width: 40 [ 0.004399] ... generic registers: 2 [ 0.004485] ... value mask: 000000ffffffffff [ 0.004574] ... max period: 000000007fffffff [ 0.004663] ... fixed-purpose events: 3 [ 0.004750] ... event mask: 0000000700000003 [ 0.005765] ACPI: Core revision 20090903 [ 0.015061] Setting APIC routing to flat [ 0.015455] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.025653] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06 [ 0.025996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.002999] Initializing CPU#1 [ 0.002999] Calibrating delay using timer specific routine.. 4787.16 BogoMIPS (lpj=2393583) [ 0.002999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.002999] CPU: L2 cache: 3072K [ 0.002999] CPU: Physical Processor ID: 0 [ 0.002999] CPU: Processor Core ID: 1 [ 0.002999] CPU1: Thermal monitoring enabled (TM2) [ 0.096020] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06 [ 0.096822] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.097000] Brought up 2 CPUs [ 0.097988] Total of 2 processors activated (9575.43 BogoMIPS). [ 0.098654] khelper used greatest stack depth: 6240 bytes left [ 0.098991] khelper used greatest stack depth: 6032 bytes left [ 0.099162] Time: 20:53:56 Date: 12/09/09 [ 0.099289] NET: Registered protocol family 16 [ 0.099393] ACPI: bus type pci registered [ 0.100029] PCI: Using configuration type 1 for base access [ 0.106085] bio: create slab <bio-0> at 0 [ 0.109097] ACPI: EC: Look up EC in DSDT [ 0.116546] ACPI: Interpreter enabled [ 0.116636] ACPI: (supports S0 S1 S4 S5) [ 0.116825] ACPI: Using IOAPIC for interrupt routing [ 0.126187] ACPI: No dock devices found. [ 0.126386] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.126508] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.126508] pci 0000:00:01.0: PME# disabled [ 0.126508] pci 0000:00:02.0: reg 10 64bit mmio: [0xfc800000-0xfcbfffff] [ 0.126508] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.126508] pci 0000:00:02.0: reg 20 io port: [0xff00-0xff07] [ 0.126508] pci 0000:00:1a.0: reg 20 io port: [0xfe00-0xfe1f] [ 0.126508] pci 0000:00:1a.1: reg 20 io port: [0xfd00-0xfd1f] [ 0.126508] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f] [ 0.126508] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.126559] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.126651] pci 0000:00:1a.7: PME# disabled [ 0.126774] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.126814] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.126906] pci 0000:00:1b.0: PME# disabled [ 0.127038] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.127130] pci 0000:00:1c.0: PME# disabled [ 0.127275] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.127366] pci 0000:00:1c.1: PME# disabled [ 0.127507] pci 0000:00:1d.0: reg 20 io port: [0xfb00-0xfb1f] [ 0.127573] pci 0000:00:1d.1: reg 20 io port: [0xfa00-0xfa1f] [ 0.127639] pci 0000:00:1d.2: reg 20 io port: [0xf900-0xf91f] [ 0.127710] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.127762] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.127855] pci 0000:00:1d.7: PME# disabled [ 0.128132] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807] [ 0.128138] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703] [ 0.128143] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607] [ 0.128149] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503] [ 0.128154] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf41f] [ 0.128160] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffd000-0xfdffd7ff] [ 0.128190] pci 0000:00:1f.2: PME# supported from D3hot [ 0.128281] pci 0000:00:1f.2: PME# disabled [ 0.128394] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff] [ 0.128407] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.128469] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.128561] pci 0000:01:00.0: PME# disabled [ 0.128695] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.128788] pci 0000:01:00.2: PME# disabled [ 0.128919] pci 0000:00:01.0: bridge io port: [0xc000-0xdfff] [ 0.128922] pci 0000:00:01.0: bridge 32bit mmio: [0xfdb00000-0xfdcfffff] [ 0.128926] pci 0000:00:01.0: bridge 64bit mmio pref: [0xfcc00000-0xfd3fffff] [ 0.128986] pci 0000:02:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcfffff] [ 0.128997] pci 0000:02:0e.0: reg 18 32bit mmio pref: [0xfcc00000-0xfcffffff] [ 0.129017] pci 0000:02:0e.0: reg 30 32bit mmio pref: [0xfdce0000-0xfdceffff] [ 0.129042] pci 0000:02:0e.0: supports D1 [ 0.129071] pci 0000:01:00.0: bridge io port: [0xd000-0xdfff] [ 0.129075] pci 0000:01:00.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.129080] pci 0000:01:00.0: bridge 64bit mmio pref: [0xfcc00000-0xfcffffff] [ 0.129175] pci 0000:04:00.0: reg 10 io port: [0xbe00-0xbeff] [ 0.129194] pci 0000:04:00.0: reg 18 64bit mmio: [0xfd8ff000-0xfd8fffff] [ 0.129207] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xfd7f0000-0xfd7fffff] [ 0.129215] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfd8c0000-0xfd8dffff] [ 0.129254] pci 0000:04:00.0: supports D1 D2 [ 0.129256] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129349] pci 0000:04:00.0: PME# disabled [ 0.129484] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff] [ 0.129488] pci 0000:00:1c.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.129494] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.129548] pci 0000:05:00.0: reg 10 io port: [0xaf00-0xaf07] [ 0.129557] pci 0000:05:00.0: reg 14 io port: [0xae00-0xae03] [ 0.129566] pci 0000:05:00.0: reg 18 io port: [0xad00-0xad07] [ 0.129574] pci 0000:05:00.0: reg 1c io port: [0xac00-0xac03] [ 0.129583] pci 0000:05:00.0: reg 20 io port: [0xab00-0xab0f] [ 0.129599] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xfdef0000-0xfdefffff] [ 0.129681] pci 0000:00:1c.1: bridge io port: [0xa000-0xafff] [ 0.129685] pci 0000:00:1c.1: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.129691] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.129738] pci 0000:00:1e.0: transparent bridge [ 0.129828] pci 0000:00:1e.0: bridge io port: [0x9000-0x9fff] [ 0.129832] pci 0000:00:1e.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.129838] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.129854] pci_bus 0000:00: on NUMA node 0 [ 0.129859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.130028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.130092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.130172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.149077] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.149530] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.149530] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.149551] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.150043] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.153200] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.153647] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.153647] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.154011] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.154147] vgaarb: loaded [ 0.155055] SCSI subsystem initialized [ 0.156993] libata version 3.00 loaded. [ 0.158006] usbcore: registered new interface driver usbfs [ 0.158093] usbcore: registered new interface driver hub [ 0.158093] usbcore: registered new device driver usb [ 0.158093] PCI: Using ACPI for IRQ routing [ 0.159017] cfg80211: Using static regulatory domain info [ 0.159068] cfg80211: Regulatory domain: US [ 0.159155] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.159308] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.159400] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.159490] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.159581] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.159672] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.159762] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.159762] cfg80211: Calling CRDA for country: US [ 0.159982] NetLabel: Initializing [ 0.160066] NetLabel: domain hash size = 128 [ 0.160152] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.160250] NetLabel: unlabeled traffic allowed by default [ 0.160356] Switching to clocksource tsc [ 0.164397] pnp: PnP ACPI init [ 0.164492] ACPI: bus type pnp registered [ 0.167977] pnp: PnP ACPI: found 13 devices [ 0.168065] ACPI: ACPI bus type pnp unregistered [ 0.168161] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.168252] system 00:01: ioport range 0x680-0x6ff has been reserved [ 0.168342] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.168436] system 00:09: ioport range 0x400-0x4bf has been reserved [ 0.168531] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.168624] system 00:0c: iomem range 0xf0000-0xfffff could not be reserved [ 0.168715] system 00:0c: iomem range 0x7bd00000-0x7bdfffff has been reserved [ 0.168806] system 00:0c: iomem range 0x7bc90000-0x7bcfffff could not be reserved [ 0.168958] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.169053] system 00:0c: iomem range 0x100000-0x7bc8ffff could not be reserved [ 0.169205] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.169357] system 00:0c: iomem range 0xfed13000-0xfed1ffff has been reserved [ 0.169448] system 00:0c: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.169539] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.169631] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.169722] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.169814] system 00:0c: iomem range 0xe0000-0xeffff has been reserved [ 0.177539] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.177629] pci 0000:01:00.0: IO window: 0xd000-0xdfff [ 0.177720] pci 0000:01:00.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.177812] pci 0000:01:00.0: PREFETCH window: 0x000000fcc00000-0x000000fcffffff [ 0.177971] pci 0000:01:00.2: PCI bridge, secondary bus 0000:03 [ 0.178061] pci 0000:01:00.2: IO window: disabled [ 0.178151] pci 0000:01:00.2: MEM window: disabled [ 0.178240] pci 0000:01:00.2: PREFETCH window: disabled [ 0.178329] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.178418] pci 0000:00:01.0: IO window: 0xc000-0xdfff [ 0.178509] pci 0000:00:01.0: MEM window: 0xfdb00000-0xfdcfffff [ 0.178599] pci 0000:00:01.0: PREFETCH window: 0x000000fcc00000-0x000000fd3fffff [ 0.178753] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.178843] pci 0000:00:1c.0: IO window: 0xb000-0xbfff [ 0.178933] pci 0000:00:1c.0: MEM window: 0xfd800000-0xfd8fffff [ 0.179028] pci 0000:00:1c.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.179184] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05 [ 0.179275] pci 0000:00:1c.1: IO window: 0xa000-0xafff [ 0.179366] pci 0000:00:1c.1: MEM window: 0xfde00000-0xfdefffff [ 0.179457] pci 0000:00:1c.1: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.179612] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.179702] pci 0000:00:1e.0: IO window: 0x9000-0x9fff [ 0.179793] pci 0000:00:1e.0: MEM window: 0xfda00000-0xfdafffff [ 0.179884] pci 0000:00:1e.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.180049] alloc irq_desc for 16 on node -1 [ 0.180051] alloc kstat_irqs on node -1 [ 0.180056] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.180148] pci 0000:00:01.0: setting latency timer to 64 [ 0.180155] pci 0000:01:00.0: setting latency timer to 64 [ 0.180162] pci 0000:01:00.2: setting latency timer to 64 [ 0.180170] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.180262] pci 0000:00:1c.0: setting latency timer to 64 [ 0.180269] alloc irq_desc for 17 on node -1 [ 0.180271] alloc kstat_irqs on node -1 [ 0.180274] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.180366] pci 0000:00:1c.1: setting latency timer to 64 [ 0.180372] pci 0000:00:1e.0: setting latency timer to 64 [ 0.180376] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.180378] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.180381] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff] [ 0.180383] pci_bus 0000:01: resource 1 mem: [0xfdb00000-0xfdcfffff] [ 0.180385] pci_bus 0000:01: resource 2 pref mem [0xfcc00000-0xfd3fffff] [ 0.180387] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.180389] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.180391] pci_bus 0000:02: resource 2 pref mem [0xfcc00000-0xfcffffff] [ 0.180394] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 0.180396] pci_bus 0000:04: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.180398] pci_bus 0000:04: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.180401] pci_bus 0000:05: resource 0 io: [0xa000-0xafff] [ 0.180403] pci_bus 0000:05: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.180405] pci_bus 0000:05: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.180407] pci_bus 0000:06: resource 0 io: [0x9000-0x9fff] [ 0.180409] pci_bus 0000:06: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.180411] pci_bus 0000:06: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.180413] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.180415] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.180443] NET: Registered protocol family 2 [ 0.180603] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.181129] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.183199] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.183849] TCP: Hash tables configured (established 262144 bind 65536) [ 0.183940] TCP reno registered [ 0.184180] NET: Registered protocol family 1 [ 0.187025] RPC: Registered udp transport module. [ 0.187123] RPC: Registered tcp transport module. [ 0.187212] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.187316] pci 0000:00:02.0: Boot video device [ 0.187322] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 0.187323] pci 0000:00:1a.0: Performing full reset [ 0.187339] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.187340] pci 0000:00:1a.1: Performing full reset [ 0.187355] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.187357] pci 0000:00:1a.2: Performing full reset [ 0.187399] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 0.187401] pci 0000:00:1d.0: Performing full reset [ 0.187416] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.187417] pci 0000:00:1d.1: Performing full reset [ 0.187432] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.187434] pci 0000:00:1d.2: Performing full reset [ 0.187461] pci 0000:01:00.0: rerouting interrupts for [8086:0370] [ 0.187553] pci 0000:01:00.2: rerouting interrupts for [8086:0372] [ 0.188956] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 0.189050] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 0.189179] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.189332] Scanning for low memory corruption every 60 seconds [ 0.189656] audit: initializing netlink socket (disabled) [ 0.189754] type=2000 audit(1260392035.189:1): initialized [ 0.194285] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.199985] VFS: Disk quotas dquot_6.5.2 [ 0.200156] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.201199] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 0.201560] msgmni has been set to 3875 [ 0.201746] SELinux: Registering netfilter hooks [ 0.204224] alg: No test for stdrng (krng) [ 0.204401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.204555] io scheduler noop registered [ 0.204642] io scheduler anticipatory registered [ 0.204730] io scheduler deadline registered [ 0.204827] io scheduler cfq registered (default) [ 0.205047] alloc irq_desc for 24 on node -1 [ 0.205049] alloc kstat_irqs on node -1 [ 0.205057] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.205062] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.205198] alloc irq_desc for 25 on node -1 [ 0.205199] alloc kstat_irqs on node -1 [ 0.205206] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.205213] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.205321] alloc irq_desc for 26 on node -1 [ 0.205323] alloc kstat_irqs on node -1 [ 0.205329] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.205336] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.205515] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.205800] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.205959] ACPI: Power Button [PWRB] [ 0.206136] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.206289] ACPI: Power Button [PWRF] [ 0.206471] fan PNP0C0B:00: registered as cooling_device0 [ 0.206564] ACPI: Fan [FAN] (on) [ 0.207214] processor LNXCPU:00: registered as cooling_device1 [ 0.207450] processor LNXCPU:01: registered as cooling_device2 [ 0.210946] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.211047] ACPI: Thermal Zone [THRM] (40 C) [ 0.211298] Marking TSC unstable due to TSC halts in idle [ 0.211432] Switching to clocksource acpi_pm [ 0.211433] XENFS: not registering filesystem on non-xen platform [ 0.214774] Non-volatile memory driver v1.3 [ 0.214864] Linux agpgart interface v0.103 [ 0.214964] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 0.216080] agpgart-intel 0000:00:00.0: detected 65532K stolen memory [ 0.218879] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.219091] [drm] Initialized drm 1.1.0 20060810 [ 0.219215] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.219308] i915 0000:00:02.0: setting latency timer to 64 [ 0.227070] mtrr: no more MTRRs available [ 0.227172] [drm] MTRR allocation failed. Graphics performance may suffer. [ 0.229161] alloc irq_desc for 27 on node -1 [ 0.229164] alloc kstat_irqs on node -1 [ 0.229174] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 0.229181] [drm] set up 63M of stolen space [ 0.473268] [drm] DAC-6: set mode 1600x1200 21 [ 0.502832] Console: switching to colour frame buffer device 200x75 [ 0.507333] fb0: inteldrmfb frame buffer device [ 0.507354] registered panic notifier [ 0.509042] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.509090] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no) [ 0.509194] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 0.509286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.753125] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.997118] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.997564] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.997770] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.999947] brd: module loaded [ 1.000915] loop: module loaded [ 1.001002] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.001419] ahci 0000:00:1f.2: version 3.0 [ 1.001436] alloc irq_desc for 19 on node -1 [ 1.001438] alloc kstat_irqs on node -1 [ 1.001443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.001500] alloc irq_desc for 28 on node -1 [ 1.001502] alloc kstat_irqs on node -1 [ 1.001510] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.001537] ahci: SSS flag set, parallel bus scan disabled [ 1.001592] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.001630] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 1.001669] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.007227] scsi0 : ahci [ 1.007409] scsi1 : ahci [ 1.007540] scsi2 : ahci [ 1.007666] scsi3 : ahci [ 1.007794] scsi4 : ahci [ 1.007922] scsi5 : ahci [ 1.008206] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 28 [ 1.008243] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 28 [ 1.008279] ata3: DUMMY [ 1.008293] ata4: DUMMY [ 1.008306] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 28 [ 1.008343] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 28 [ 1.008635] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 1.008666] Copyright (c) 1999-2006 Intel Corporation. [ 1.008742] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.008770] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.008853] tun: Universal TUN/TAP device driver, 1.6 [ 1.008877] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 1.008973] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.009016] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.009079] r8169 0000:04:00.0: setting latency timer to 64 [ 1.009119] alloc irq_desc for 29 on node -1 [ 1.009121] alloc kstat_irqs on node -1 [ 1.009149] r8169 0000:04:00.0: irq 29 for MSI/MSI-X [ 1.009406] eth0: RTL8168c/8111c at 0xffffc90000064000, 00:01:29:2b:b1:5c, XID 1c4000c0 IRQ 29 [ 1.012256] console [netcon0] enabled [ 1.012275] netconsole: network logging started [ 1.012469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.012504] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 1.012522] alloc irq_desc for 18 on node -1 ... ... ...usb stuff removed... ... [ 1.203114] drivers/usb/core/inode.c: creating file '001' [ 1.203230] usbcore: registered new interface driver usblp [ 1.204914] Initializing USB Mass Storage driver... [ 1.206609] usbcore: registered new interface driver usb-storage [ 1.208239] USB Mass Storage support registered. [ 1.209959] usbcore: registered new interface driver libusual [ 1.211720] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 1.213458] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 1.216762] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.217861] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.219494] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.221279] mice: PS/2 mouse device common for all mice [ 1.223274] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.225354] w83627ehf: Found W83627EHG chip at 0x6b0 [ 1.227084] ACPI: I/O resource w83627ehf [0x6b5-0x6b6] conflicts with ACPI region SEN1 [0x6b5-0x6b6] [ 1.228775] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.230520] md: raid0 personality registered for level 0 [ 1.232263] md: raid1 personality registered for level 1 [ 1.234195] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 1.236106] cpuidle: using governor ladder [ 1.237816] cpuidle: using governor menu [ 1.239570] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.240793] usbcore: registered new interface driver hiddev [ 1.242624] usbcore: registered new interface driver usbhid [ 1.244379] usbhid: v2.6:USB HID core driver [ 1.246173] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 1.248234] alloc irq_desc for 22 on node -1 [ 1.248236] alloc kstat_irqs on node -1 [ 1.248241] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.249996] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1.259529] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00 [ 1.276025] hub 2-0:1.0: state 7 ports 6 chg 000c evt 0000 [ 1.276033] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.276043] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion [ 1.281025] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 [ 1.281160] hda_codec: ALC262: BIOS auto-probing. [ 1.287576] ALSA device list: [ 1.289271] #0: HDA Intel at 0xfdff8000 irq 22 [ 1.291021] Netfilter messages via NETLINK v0.30. [ 1.292748] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.294730] ctnetlink v0.93: registering with nfnetlink. [ 1.297138] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.298894] TCP cubic registered [ 1.300592] Initializing XFRM netlink socket [ 1.302528] NET: Registered protocol family 10 [ 1.305271] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.307036] IPv6 over IPv4 tunneling driver [ 1.309413] NET: Registered protocol family 17 [ 1.311337] PM: Resume from disk failed. [ 1.311350] registered taskstats version 1 [ 1.313458] Magic number: 5:175:902 [ 1.327148] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 1.327174] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 1.327181] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion [ 1.378025] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 1.378044] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 1.378053] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.378057] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 1.378065] uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00 [ 1.378072] hub 6-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 1.471027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.472954] ata1.00: ATA-7: STT_FTM64GX25H, 1571, max UDMA/133 [ 1.474667] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.476632] ata1.00: configured for UDMA/133 [ 1.482024] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 1.500133] scsi 0:0:0:0: Direct-Access ATA STT_FTM64GX25H 1571 PQ: 0 ANSI: 5 [ 1.502148] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 1.503040] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.505672] sd 0:0:0:0: [sda] Write Protect is off [ 1.507378] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.507401] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.509294] sda: sda1 sda2 [ 1.511556] sd 0:0:0:0: [sda] Attached SCSI disk ... .. . ... .. [ 2.379030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.383871] ata2.00: ATA-6: HDS722525VLSA80, V36OA6MA, max UDMA/100 [ 2.385746] ata2.00: 488397168 sectors, multi 0: LBA48 [ 2.390902] ata2.00: configured for UDMA/100 [ 2.414109] scsi 1:0:0:0: Direct-Access ATA HDS722525VLSA80 V36O PQ: 0 ANSI: 5 [ 2.416164] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.418093] sd 1:0:0:0: [sdb] Write Protect is off [ 2.419948] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.420038] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.421923] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.423941] sdb: sdb1 [ 2.442537] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.608039] drivers/usb/core/file.c: looking for a minor, starting at 96 [ 2.608213] generic-usb 0003:051D:0002.0002: hiddev96,hidraw1: USB HID v1.10 Device [APC Back-UPS ES 700 FW:829.D2.I USB FW:D2] on usb-0000:00:1d.1-1/input0 [ 2.610189] drivers/usb/core/inode.c: creating file '002' [ 3.299026] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.303949] ata5.00: ATA-6: HDS722525VLSA80, V36OA6MA, max UDMA/100 [ 3.305928] ata5.00: 488397168 sectors, multi 0: LBA48 [ 3.311221] ata5.00: configured for UDMA/100 [ 3.324114] scsi 4:0:0:0: Direct-Access ATA HDS722525VLSA80 V36O PQ: 0 ANSI: 5 [ 3.326254] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.327113] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.330170] sd 4:0:0:0: [sdc] Write Protect is off [ 3.332070] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.332092] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.334138] sdc: sdc1 [ 3.350383] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.632025] ata6: SATA link down (SStatus 0 SControl 300) [ 3.644045] md: Waiting for all devices to be available before autodetect [ 3.645988] md: If you don't use raid, use raid=noautodetect [ 3.648107] md: Autodetecting RAID arrays. ... ... [ 3.703665] md: Scanned 2 and added 2 devices. [ 3.705659] md: autorun ... [ 3.707588] md: considering sdc1 ... [ 3.709491] md: adding sdc1 ... [ 3.711380] md: adding sdb1 ... [ 3.713416] md: created md1 [ 3.715298] md: bind<sdb1> [ 3.717201] md: bind<sdc1> [ 3.719068] md: running: <sdc1><sdb1> [ 3.720932] md: kicking non-fresh sdc1 from array! [ 3.722779] md: unbind<sdc1> [ 3.727141] md: export_rdev(sdc1) [ 3.729158] raid1: raid set md1 active with 1 out of 2 mirrors [ 3.731029] md1: detected capacity change from 0 to 250056605696 [ 3.732923] md: ... autorun DONE. [ 3.734978] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). [ 3.741964] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.743882] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 3.745808] Freeing unused kernel memory: 532k freed [ 3.747897] Write protecting the kernel read-only data: 8492k [ 3.793020] stty used greatest stack depth: 5224 bytes left ... ... [ 4.052182] ARECA RAID ADAPTER6: FIRMWARE VERSION V1.47 2009-06-25 [ 4.064743] usb usb8: uevent [ 4.065264] scsi6 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 4.065265] Driver Version 1.20.00.15 2008/02/27 [ 4.070463] usb usb2: uevent [ 4.087798] scsi 6:0:0:0: Direct-Access Areca ARC-1230-VOL#00 R001 PQ: 0 ANSI: 5 [ 4.093152] sd 6:0:0:0: [sdd] 2929686528 512-byte logical blocks: (1.49 TB/1.36 TiB) [ 4.095275] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 4.097294] sd 6:0:0:0: [sdd] Write Protect is off [ 4.099325] sd 6:0:0:0: [sdd] Mode Sense: cb 00 00 08 [ 4.099662] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.108931] scsi 6:0:0:1: Direct-Access Areca ARC-1230-VOL#01 R001 PQ: 0 ANSI: 5 [ 4.109642] usb 7-1: uevent [ 4.111305] sdd: [ 4.111936] usb 6-2: uevent [ 4.114189] sdd1 [ 4.122777] sd 6:0:0:1: [sde] 7812499456 512-byte logical blocks: (3.99 TB/3.63 TiB) [ 4.122851] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 4.127948] sd 6:0:0:1: [sde] Write Protect is off [ 4.134505] scsi 6:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 4.135383] sd 6:0:0:1: [sde] Mode Sense: cb 00 00 08 [ 4.138653] md1: [ 4.138782] sd 6:0:0:1: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.140780] scsi 6:0:16:0: Attached scsi generic sg5 type 3 [ 4.142367] usb 6-2:1.0: uevent [ 4.142478] usb 6-2: uevent [ 4.145287] sd 6:0:0:0: [sdd] Attached SCSI disk [ 4.147791] unknown partition table [ 4.148639] usb 6-2:1.0: uevent [ 4.150248] devkit-disks-pa used greatest stack depth: 4792 bytes left [ 4.162882] sde: sde1 [ 4.195412] sd 6:0:0:1: [sde] Attached SCSI disk [ 4.197544] modprobe used greatest stack depth: 4616 bytes left [ 6.018762] logsave used greatest stack depth: 4464 bytes left [ 6.058037] Adding 1074512k swap on /dev/mapper/sda_swap. Priority:-1 extents:1 across:1074512k [ 6.260411] r8169: eth0: link up [ 6.261412] r8169: eth0: link up [ 27.678993] accton used greatest stack depth: 4328 bytes left [ 27.773062] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 106 us ... ... ... [ 36.706016] tap0: no IPv6 routers present [ 224.290411] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 224.290510] kjournald starting. Commit interval 5 seconds [ 224.316945] EXT3 FS on dm-1, internal journal [ 224.316985] EXT3-fs: mounted filesystem with writeback data mode. [ 224.430594] kjournald starting. Commit interval 5 seconds [ 224.430648] EXT3 FS on sdd1, internal journal [ 224.430675] EXT3-fs: mounted filesystem with writeback data mode. [ 224.451836] kjournald starting. Commit interval 5 seconds [ 224.451874] EXT3 FS on sde1, internal journal [ 224.451903] EXT3-fs: mounted filesystem with writeback data mode. [ 226.214504] svc: failed to register lockdv1 RPC service (errno 97). [ 226.215624] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory greetings -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
