Kindly provide me step by step installing and configuring the Redhat cluster and load balancing on Redhat.
Regards,
Balaji V.
@91 9789055068
India
On Thu, Oct 28, 2010 at 7:35 PM, Ben Turner <bturner@xxxxxxxxxx> wrote:
Ok I see you are using fence_ilo but I don't see a messages snip. The messages snip will tell us exactly what is going on, there isn't much I can do without it. You may want to try running:
>From node 2:
# fence_node rhel-cluster-node1.mgmt.local
>From node 1:
# fence_node rhel-cluster-node2.mgmt.local
This should cause your nodes to get rebooted, if it doesn't then there is a problem with your fencing config. A snip of your messages file from one of these events would help out here.
-Ben
----- "Wahyu Darmawan" <wahyu@xxxxxxxxxxxxxx> wrote:
> Hi Ben,
> Here is my cluster.conf. Need your help please.
>
>
> <?xml version="1.0"?>
> <cluster alias="PORTAL_WORLD" config_version="32" name="PORTAL_WORLD">
> <fence_daemon clean_start="0" post_fail_delay="0"
> post_join_delay="3"/>
> <clusternodes>
> <clusternode name="rhel-cluster-node1.mgmt.local" nodeid="1"
> votes="1">
> <fence>
> <method name="1">
> <device name="NODE1-ILO"/>
> </method>
> </fence>
> </clusternode>
> <clusternode name="rhel-cluster-node2.mgmt.local" nodeid="2"
> votes="1">
> <fence>
> <method name="1">
> <device name="NODE2-ILO"/>
> </method>
> </fence>
> </clusternode>
> </clusternodes>
> <quorumd device="/dev/sdf1" interval="3" label="quorum_disk1"
> tko="23" votes="2">
> <heuristic interval="2" program="ping 10.4.0.1 -c1 -t1" score="1"/>
> </quorumd>
> <cman expected_votes="1" two_node="1"/>
> <fencedevices>
> <fencedevice agent="fence_ilo" hostname="ilo-node2"
> login="Administrator" name="NODE2-ILO" passwd="password"/>
> <fencedevice agent="fence_ilo" hostname="ilo-node1"
> login="Administrator" name="NODE1-ILO" passwd="password"/>
> </fencedevices>
> <rm>
> <failoverdomains>
> <failoverdomain name="Failover" nofailback="1" ordered="0"
> restricted="0">
> <failoverdomainnode name="rhel-cluster-node2.mgmt.local"
> priority="1"/>
> <failoverdomainnode name="rhel-cluster-node1.mgmt.local"
> priority="1"/>
> </failoverdomain>
> </failoverdomains>
> <resources>
> <ip address="10.4.1.103" monitor_link="1"/>
> </resources>
> <service autostart="1" domain="Failover" exclusive="0"
> name="IP_Virtual" recovery="relocate">
> <ip ref="10.4.1.103"/>
> </service>
> </rm>
> </cluster>
>
> Many thanks,
> Wahyu
>
> -----Original Message-----
> From: linux-cluster-bounces@xxxxxxxxxx
> [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Ben Turner
> Sent: Thursday, October 28, 2010 12:18 AM
> To: linux clustering
> Subject: Re: Fence Issue on BL 460C G6
>
> My guess is there is a problem with fencing. Are you running
> fence_ilo with an HP blade? Iirc the iLOs on the blades have a
> different CLI, I don't think fence_ilo will work with them. What do
> you see in the messages files during these events? If you see failed
> fence messages you may want to look into using fence_ipmilan:
>
> http://sources.redhat.com/cluster/wiki/IPMI_FencingConfig
>
> If you post a snip of your messages file from this event and your
> cluster.conf I will have a better idea of what is going on.
>
> -b
>
>
>
> ----- "Wahyu Darmawan" <wahyu@xxxxxxxxxxxxxx> wrote:
>
> > Hi all,
> >
> >
> >
> > For fencing, I’m using HP iLO and server is BL460c G6. Problem is
> > resource is start moving to the passive when the failed node is
> power
> > on. It is really strange for me. For example, I shutdown the node1
> and
> > physically remove the node1 machine from the blade chassis and
> monitor
> > the clustat output, clustat was still showing that the resource is
> on
> > node 1, even node 1 is power down and removed from c7000 blade
> > chassis. But when I plugged again the failed node1 on the c7000
> blade
> > chassis and it power-on, then clustat is showing that the resource
> is
> > start moving to the passive node from the failed node.
> > I’m powering down the blade server with power button in front of it,
> > then we remove it from the chassis, If we face the hardware problem
> in
> > our active node and the active node goes down then how the resource
> > move to the passive node. In addition, When I rebooted or shutdown
> the
> > machine from the CLI, then the resource moves successfully from the
> > passive node. Furthurmore, When I shutdown the active node with
> > "shutdown -hy 0" command, after shuting down the active node
> > automatically restart.
> >
> > Please help me.
> >
> >
> >
> > Many Thanks,
> > --
> > Linux-cluster mailing list
> > Linux-cluster@xxxxxxxxxx
> > https://www.redhat.com/mailman/listinfo/linux-cluster
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Regards,
Balaji.V
@+91 9789055068
India
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
