Hi
Here are the firewall settings
#more /etc/sysconfig/iptables
# Generated by iptables-save v1.3.5 on Wed Jul 14 10:13:12 2010
*filter
:INPUT ACCEPT [2:186]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [4:486]
-A INPUT -i eth5 -p udp -m udp --dport 5405 -j ACCEPT
-A INPUT -i eth5 -p udp -m udp --sport 5405 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 14567 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 14567 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 16851 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 16851 -j ACCEPT
-A INPUT -i eth5 -p udp -m udp --dport 50007 -j ACCEPT
-A INPUT -i eth5 -p udp -m udp --sport 50007 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 11111 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 11111 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 21064 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 21064 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 50009 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 50009 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 50008 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 50008 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 50006 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 50006 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 41969 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 41969 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 41968 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 41968 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 41967 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 41967 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --dport 41966 -j ACCEPT
-A INPUT -i eth5 -p tcp -m tcp --sport 41966 -j ACCEPT
-A OUTPUT -o eth5 -p udp -m udp --sport 5405 -j ACCEPT
-A OUTPUT -o eth5 -p udp -m udp --dport 5405 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 14567 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 14567 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 16851 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 16851 -j ACCEPT
-A OUTPUT -o eth5 -p udp -m udp --sport 50007 -j ACCEPT
-A OUTPUT -o eth5 -p udp -m udp --dport 50007 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 11111 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 11111 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 21064 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 21064 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 50009 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 50009 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 50008 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 50008 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 50006 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 50006 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 41969 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 41969 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 41968 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 41968 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 41967 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 41967 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --sport 41966 -j ACCEPT
-A OUTPUT -o eth5 -p tcp -m tcp --dport 41966 -j ACCEPT
COMMIT
Here are the IP in the system,I am using eth5 (Which is in private network with other two nodes, connected to switch)
[root@usrylxap235 ~]# ip addr list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:1c:c4:f0:bd:d8 brd ff:ff:ff:ff:ff:ff
inet 54.3.254.235/24 brd 54.3.254.255 scope global eth0
inet6 fe80::21c:c4ff:fef0:bdd8/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:1c:c4:f0:bd:da brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:1c:c4:5e:f8:d8 brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:1c:c4:5e:f8:da brd ff:ff:ff:ff:ff:ff
6: eth4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:1e:0b:71:ac:6c brd ff:ff:ff:ff:ff:ff
7: eth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:1e:0b:71:ac:6e brd ff:ff:ff:ff:ff:ff
inet 192.168.0.7/24 brd 192.168.0.255 scope global eth5
inet6 fe80::21e:bff:fe71:ac6e/64 scope link
valid_lft forever preferred_lft forever
8: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
Thanks
Anoop
>Date: Thu, 15 Jul 2010 11:21:12 +0800
>From: Bernard Chew <bernardchew@xxxxxxxxx>
>To: linux clustering <linux-cluster@xxxxxxxxxx>
>Subject: Re: Adding third node to existing cluster
problem
Message-ID:
<AANLkTintfM8Sea-B1xbakxPm8iheuDY1hFmxpi-c2S-r@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1
> On Thu, Jul 15, 2010 at 4:47 AM, Rajkumar, Anoop <anoop_rajkumar@xxxxxxxxx> wrote:
> Hi
>
> Yes I have done this way. When I try to start on third node cman start fails
> and cman_tool shows that it is not recognizing other two nodes which are
> working properly..
>
> [root@usrylxap235 ~]# service cman start
> Starting cluster:
> ?? Loading modules... done
> ?? Mounting configfs... done
> ?? Starting ccsd... done
> ?? Starting cman... done
> ?? Starting daemons... done
> ?? Starting fencing...
>
>
> failed
>
> ?????????????????????????????????????????????????????????? [FAILED]
>
> [root@usrylxap235 ~]# cman_tool status
> Version: 6.1.0
> Config Version: 44
> Cluster Name: cluster1
> Cluster Id: 26777
> Cluster Member: Yes
> Cluster Generation: 84
> Membership state: Cluster-Member
> Nodes: 1
> Expected votes: 3
> Total votes: 1
> Quorum: 2 Activity blocked
> Active subsystems: 5
> Flags:
> Ports Bound: 0
> Node name: usrylxap235-1.merck.com
> Node ID: 3
> Multicast addresses: 239.192.104.2
> Node addresses: 192.168.0.7
>
> Attached is cluster.conf file.
> <<clusterconfig.txt>>
> Thanks
> Anoop
>
> Notice: This e-mail message, together with any attachments, contains
> information of Merck & Co., Inc. (One Merck Drive, Whitehouse Station,
> New Jersey, USA 08889), and/or its affiliates Direct contact information
> for affiliates is available at
> http://www.merck.com/contact/contacts.html) that may be confidential,
> proprietary copyrighted and/or legally privileged. It is intended solely
> for the use of the individual or entity named on this message. If you are
> not the intended recipient, and have received this message in error,
> please notify us immediately by reply e-mail and then delete it from
> your system.
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
Hi,
Have you checked the firewall settings?
Regards,
Bernard
Notice: This e-mail message, together with any attachments, contains information of Merck & Co., Inc. (One Merck Drive, Whitehouse Station, New Jersey, USA 08889), and/or its affiliates Direct contact information for affiliates is available at http://www.merck.com/contact/contacts.html) that may be confidential, proprietary copyrighted and/or legally privileged. It is intended solely for the use of the individual or entity named on this message. If you are not the intended recipient, and have received this message in error, please notify us immediately by reply e-mail and then delete it from your system.
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
