On Mon, 2010-04-19 at 14:07 +0000, jose nuno neto wrote: > Hellos > > Im testing SAN under Multipath failures and founding a behavior on the > fs.sh that is not what I wanned. > > On simulating a SAN failure either with portdown on the san switch or on > the OS ( echo offline > /sys/block/$DEVICE/device/state ) the fs.sh status > script doesn't give back an error. > > I looked at the script and think it hangs on the ls or touch test (depends > on timings ) > In fact if I issue an ls/touch on the failed mountpoints it hangs forever. Set multipath configuration to "no_path_retry fail" > If I fail the devices with /sys/block/$DEVICE/device/delete then the touch > test returns an error and service switches. Right. -- Lon -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
