Thanks Moralejo
But im asking about make the heartbeat and the communication to used on both interface (Ethernet bond) so the two interface will be as failover for each other
From: linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Moralejo, Alfredo
Sent: Wednesday, May 27, 2009 11:29 PM
To: linux clustering
Subject: RE: RHCS with two Network card
You can take a look to:
http://kbase.redhat.com/faq/docs/DOC-5975
I guess it can help you.
Related to this. As far as I know conga can not be used from a system out of the cluster to configure clusters when private networks are used for inter-cluster communication, is that right?
From: linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of anasnajj
Sent: Wednesday, May 27, 2009 9:42 PM
To: linux-cluster@xxxxxxxxxx
Subject: RHCS with two Network card
Hi all
I have 5 cluster node and each node have two network card eth0 ,eth1
My cluster services have the IP Virtual ranges 10.0.10.100-103
And Eth0 have IP range 10.10.10.10 -13..
I need to setup up the second interface Eth1 to used as heartbeat communication and used as failover for Eth0 if the eth0 have cable failure or down , so how I can implement such scenario???
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.39/2133 - Release Date: 05/25/09 08:16:00
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
