|
Thanks Moralejo But
im asking about make the heartbeat and the communication to used on both
interface (Ethernet bond) so the two interface will be as failover for each
other From:
linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On
Behalf Of Moralejo, Alfredo You can take a look to: http://kbase.redhat.com/faq/docs/DOC-5975 I guess it can help you. Related to this. As far as I know conga can not be used from a
system out of the cluster to configure clusters when private networks are used
for inter-cluster communication, is that right? From:
linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On
Behalf Of anasnajj Hi all I have 5 cluster node and each node have two network card
eth0 ,eth1 My cluster services have the IP Virtual ranges
10.0.10.100-103 And Eth0 have IP range 10.10.10.10 -13.. I need to setup up the second interface Eth1 to used as
heartbeat communication and used as failover for Eth0 if the eth0 have
cable failure or down , so how I can implement such scenario??? No virus
found in this incoming message. |
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
