Hi Christine,
I could have searched Redhat knowledgebase but thought would
be easier if I clarify here. We plan to cluster two RHES, server A
& server B (on Ver 5.1AP)
a)besides the regular network port for the usual network traffic,
we only need one additional network port per server to set up
the clustering, is this right?
b)what if we want to use 2 network ports, then we have to bond
the two network ports on server A & the two network ports on
server B - is this right?
c)anything we need to do on the Cisco switch's ports end? We
are using Cisco 6513
Thanks
U
On 6/2/08, Christine Caulfield <ccaulfie@xxxxxxxxxx> wrote:
Jakub Suchy wrote:
Hi,
I would like to know, if it's possible to run heartbeat (through cman)
over two dedicated network NICs. AFAIK, in old hearbeat code, it was
possible using serial + NIC. Unfortunately, I was unable to find this in
any documentation and this is the first time a customer is requesting
this. (I am not talking about network bonding).
Basically, no.
If you want to use 2 NICs then bonding is what you need. cman can use dual NICs after a fashion but it's not supported and even less well tested.
Sorry.
--
Chrissie
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
